TIA-93-B-1-2006 Wireless Telecommunications Ai-Di Interfaces Standard C Addendum 1[E] (Addendum to TIA EIA-93-B).pdf

《TIA-93-B-1-2006 Wireless Telecommunications Ai-Di Interfaces Standard C Addendum 1[E] (Addendum to TIA EIA-93-B).pdf》由会员分享，可在线阅读，更多相关《TIA-93-B-1-2006 Wireless Telecommunications Ai-Di Interfaces Standard C Addendum 1[E] (Addendum to TIA EIA-93-B).pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-93-B-1E (Addendum to TIA/EIA-93-B) April 2006Wireless Telecommunications Ai-Di Interfaces Standard Addendum 1E ANSI/TIA-93-B-1E-2006 APPROVED: APRIL 27, 2006 REAFFIRMED: OCTOBER 19, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminat

2、ing misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not

3、in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. St

4、andards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Stand

5、ard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its us

6、e. (From Standards Proposal No. 3-3295-RV2-AD1-RF1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed i

7、n the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR c

8、onsisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scop

9、e or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant o

10、r represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, developme

11、nt or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search o

12、r investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii

13、) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify,

14、 inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROP

15、RIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE

16、WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO

17、 ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NE

18、GLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. iTIA/EIA-93-B-1Foreword This forewor

19、d is not part of this standard.The specification of interface compatibility requirements for interfaces between Wire-less Carrier networks and other carrier networks was initiated under the auspices ofthe ANSI accredited Telecommunications Industry Association Committee TR45.The purpose of this stan

20、dard is to enable separate telecommunications elements to pro-vide compatible interconnecting equipment and signaling.To accomplish this purpose, this standard provides signaling protocol requirements forinterfaces that interconnect a switching system in a Wireless Carrier network with aswitching sy

21、stem in another network (i.e., Exchange Carrier (EC), Interexchange Car-rier (IC), International Carrier (INC), Consolidated Carrier or other carrier network).Within the context of this standard, a Wireless Carrier network can provide the capa-bilities available in other carrier networks.It is expec

22、ted that the telecommunications industry will combine protocols, or parts ofprotocols, from this standard to provide telecommunications services.iiTIA/EIA-93-B-1Contents 1 Introduction11.1 Scope.11.2 Purpose12 References22.1 Normative References.22.2 Informative References.43 Terminology.53.1 Acrony

23、ms53.2 Definitions.84 Network Interface Overview134.1 Introduction.134.2 Network Interface Reference Model.144.2.1 Trunk Point of Interface (POI-T).144.2.2 SS7 Point of Interface (POI-S) 154.3 Network Interface Table .164.4 Network Interface Descriptions 174.4.1 Trunk With Line Treatment.174.4.2 Gen

24、eral Trunk Access174.4.3 Direct Trunk Access 184.4.4 Emergency Services Access 194.4.5 Operator Services Access 194.4.6 Call Management Features 204.4.7 Basic Signaling Transport204.4.8 Global Title Signaling Transport .214.4.9 Wireless Nationwide Roaming 214.4.10 TCAP Applications224.5 Signaling Me

25、thods 244.5.1 Multifrequency (MF) Signaling.244.5.1.1 Supervisory Signals 254.5.1.2 Address Signals.254.5.2 ISDN Basic Rate Interface (BRI) 254.5.3 ISDN Primary Rate Interface (PRI).264.5.4 ISDN User Part (ISUP) - SS7 264.5.5 Message Transfer Part (MTP) -SS7.274.5.6 Signaling Connection Control Part

26、 (SCCP) - SS7.284.5.7 Transaction Capabilities Application Part (TCAP) - SS7294.6 Signaling Information .305 Trunk with Line Treatment Signaling335.1 POI-T1 (MF) Interface Signaling Scenarios.336 General Trunk Access Signaling .36iiiTIA/EIA-93-B-16.1 POI-T4 (MF) Interface Signaling Scenarios.366.2 P

27、OI-T5 and POI-S5 (ISUP) Interface Signaling Scenarios 417 Direct Trunk Access Signaling 477.1 POI-T6 (MF) Interface Signaling Scenarios.477.2 POI-T7 and POI-S7 (ISUP) Interface Signaling Scenarios 498 Emergency Services Signaling 528.1 POI-T8 (MF) Interface Signaling Scenarios.528.1.1 Feature Group

28、D .528.1.2 CAMA Signaling 548.2 POI-T9 and POI-S9 (ISUP) Interface Signaling Scenarios 559 Operator Services Access Signaling 589.1 POI-T10 (MF) Interface Signaling Scenarios.589.2 POI-T11 and POI-S11 (ISUP) Interface Signaling Scenarios 6110 Call Management Features Signaling 6710.1 POI-T12 (MF) In

29、terface Signaling Scenarios.6710.2 POI-T13 and POI-S13 (ISUP) Interface Signaling Scenarios 7011 Global Title Signaling Transport .7311.1 POI-S15 (SCCP) Interface Signaling Scenarios.7312 Wireless Nationwide Roaming Signaling7512.1 POI-S16 (SCCP) Interface Signaling Scenarios.75ivTIA/EIA-93-B-1Table

30、s Table 1: Network Interface Types16Table 2: MF Functional Signals.24Table 3: Notation for Signaling Information Symbols 30Table 4: Notation for Signaling Information Digits.30Table 6: MF Key Pulse Variable Indicator Assignments.31Table 7: MF Start Pulse Indicator Assignments 31Table 5: Notation for

31、 Signaling Information Codes 31Table 8: POI-T1 Address Field Contents.33Table 9: POI-T4 Signaling Information Field Contents 36Table 10: POI-S5 Signaling Information Field Contents.41Table 11: POI-T6 Signaling Information Field Contents 47Table 12: POI-S7 Signaling Information Field Contents.49Table

32、 13: POI-T8 Signaling Information Field Contents 52Table 14: POI-T8 Signaling Information Field Contents 54Table 15: POI-S9 Signaling Information Field Contents.55Table 16: ISUP Parameters for Wireline Compatibility Mode56Table 17: ISUP Parameters for NCAS.56Table 18: ISUP Parameters for CAS56Table

33、19: POI-T10 Signaling Information Field Contents 58Table 20: POI-S11 Signaling Information Field Contents.61Table 21: POI-T12 Signaling Information Field Contents 67Table 22: POI-S13 Signaling Information Field Contents.70Table 23: POI-S15 Signaling Information Field Contents.73Table 24: POI-S16 Sig

34、naling Information Field Contents.75vTIA/EIA-93-B-1Figures Figure 1: Network Interface Reference Model .14Figure 2: POI-T1 Interface Signaling Scenario - Wireless Network Originated34Figure 3: POI-T1 Interface Signaling Scenario - Wireless Network Terminated 35Figure 4: POI-T4 Interface Signaling Sc

35、enario - Wireless Network Originated (No INC Con-nection) 37Figure 5: POI-T4 Interface Signaling Scenario - Wireless Network Terminated (No INC Con-nection) 38Figure 6: POI-T4 Interface Signaling Scenario - Wireless Network Originated (With INC Con-nection) 39Figure 7: POI-T4 Interface Signaling Sce

36、nario - Wireless Network Terminated (With INC Connection)40Figure 8: POI-S5 Interface Signaling Scenario - Wireless Network Originated45Figure 9: POI-S5 Interface Signaling Scenario - Wireless Network Terminated.46Figure 10: POI-T6 Interface Signaling Scenario - Wireless Network Originated48Figure 1

37、1: POI-T6 Interface Signaling Scenario - Wireless Network Terminated 48Figure 12: POI-S7 Interface Signaling Scenario - Wireless Network Originated50Figure 13: POI-S7 Interface Signaling Scenario - Wireless Network Terminated.51Figure 14: POI-T8 Interface Signaling Scenario - Wireless Network Origin

38、ation (Direct Con-nection) using Feature Group D.53Figure 15: POI-T8 Interface Signaling Scenario - CAMA Signaling.54Figure 16: POI-S9 Interface Signaling Scenario - Wireless Network Originated57Figure 17: POI-T10 Interface Signaling Scenario - Wireless Network Originated59Figure 18: POI-T10 Interfa

39、ce Signaling Scenario - Wireless Network Terminated 60Figure 19: POI-S11 Interface Signaling Scenario - Wireless Network Originated65Figure 20: POI-S11 Interface Signaling Scenario - Wireless Network Terminated.66Figure 21: POI-T12 Interface Signaling Scenario - Wireless Network Originated68Figure 2

40、2: POI-T12 Interface Signaling Scenario - Wireless Network Terminated 69Figure 23: POI-S13 Interface Signaling Scenario - Wireless Network Originated71Figure 24: POI-S13 Interface Signaling Scenario - Wireless Network Terminated.72Figure 25: POI-S15 Interface Signaling Scenario - Wireless Network Or

41、iginated73Figure 26: POI-S15 Interface Signaling Scenario - Wireless Network Terminated.74Figure 27: POI-S16 Interface Signaling Scenario - Wireless Network Originated75Figure 28: POI-S16 Interface Signaling Scenario - Wireless Network Terminated.761TIA/EIA-93-B-11 Introduction1.1 ScopeThis standard

42、 provides interface compatibility specifications and technical requirements for the interfac-ing of a Wireless Carrier to an Exchange Carrier (EC), Interexchange Carrier (IC), International Carrier(INC), Consolidated Carrier or any other carrier element.This standard provides technical requirements

43、for an interface that interconnects a switching system in awireless network with a switching system in the Public Switched Telephone Network (PSTN) or aswitching system in an Integrated Services Digital Network (ISDN). Within the ANSI accredited Tele-communications Industry Association (TIA) TR45 Ne

44、twork Reference Model, these interfaces are de-noted as the Aiand Diinterfaces, respectively. For the purposes of this standard, these two interfaces aretreated generically as a single interface defined concisely by a signaling protocol and by signaling infor-mation provided via that protocol.By arr

45、anging the interface specifications into a number of individual signaling protocols, this standardprovides the interconnecting network elements with a variety of compatible signaling methods to providetelecommunications services. The telecommunications services provided and, therefore, the specific

46、in-terface signaling protocols available at the interface, are determined by business decisions, mutual inter-face agreements and legal and regulatory requirements. These decisions, agreements and requirementsare beyond the scope of this technical standard.The technical information provided in this

47、specification complies with ANSI standard T1.104(see Sec-tion 2 - References). Refer to this document for more details about the technical requirements of the spec-ified internetwork interfaces.1.2 PurposeThe purpose of this standard is to enable separate telecommunications elements to provide inter

48、connect-ing equipment that will operate compatibly. Descriptions of the specific signaling characteristics of theinterconnecting systems are provided in this technical standard.This standard is a technical interface specification intended to describe interface signaling protocols be-tween a wireless

49、 network element and other network elements. It is beyond the scope and purpose of thisstandard to describe or specify telecommunications services; to specify the particular interface signalingprotocols that are used or not used with any telecommunications service; or to specify the performanceof the telecommunications services provided using the interface signaling protocols specified in thistechnical standard.2TIA/EIA-93-B-12 References2.1 Normative ReferencesThe following standards and specifications contain provisions which, through reference in this text, con-stitute provisi