TIA TSB-87-2015-1997 Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics《蜂窝数字分组数据系统规范-第2015部用户识别模块功能特性》.pdf

《TIA TSB-87-2015-1997 Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics《蜂窝数字分组数据系统规范-第2015部用户识别模块功能特性》.pdf》由会员分享，可在线阅读，更多相关《TIA TSB-87-2015-1997 Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics《蜂窝数字分组数据系统规范-第2015部用户识别模块功能特性》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 20 15 Subscriber Identity Module Functional Characteristics TSB-87-20 15 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association repre

2、sents the conmiunications sector of NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in sele

3、cting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the exi

4、stence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (AN

5、SI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation o

6、f engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or

7、 that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating commi

8、ttee to review this document every five years, but it maybe revised and updated at any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4015, formulated under the cognizance of the TIA TR-45.6 Subc

9、ommittee on Adjunct Wireless Packet Data Technology.) This Document was reaffirmed by the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: P

10、lease refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order .ch All right

11、s reserved Printed in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and

12、 claims copyright to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http

13、:/www.tiaonline.orZr/standards/sfZr/engineering manual.ch. TIAS function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACT

14、ICE OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AN

15、D CALLED TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE D

16、ISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPR

17、ESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONT

18、AINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY

19、OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. STD*EIA TSB87-2015-ENGL 1777 3234b00 ObOL512 Ob1 I TIAIEIA TELECO

20、MMNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics TSBS7-2015 DECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Ax Rq.ibCwaOommU b-r*b ibe Elaeimlc 1- hmdaioo fNSlRYRsisocN NOTICE WEiA Engineering Stand

21、ards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for hi

22、s particular need. Existence of such Standards and miblications shall not in any respect preclude any member or nonmember of TIAIEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their vol

23、untary use by those other than TIAIEIA members, whether the standard is to be used either domestidy or internationally. Standards, Publications and Buletins are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, WEIA does not assume any

24、liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA/EIA Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the

25、 technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accept

26、ed by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from ti

27、me to time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 4015, formulated under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) hblished by IELECOMMUNICATIONS IND

28、USTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to the current Catalog of EIA, JEDEC and TIA STANDARDS and ENGNEJZRING PUBLICATIONS International (303-397-7956) or call Global Engineering Documents, USA and Canada (i-80-854-717

29、9) Ali rights reserved Printed in U.S.A. STD-EIA TSB7-ZOL5-ENGL 1977 m 3239b00 Ob01519 73q TWEIAfK3B-87-2015 . PART 2015 Table of Contents O Foreword 2015-iii 0.1 Document Structure .201 5.111 . 1 Introduction 2015-1 2 General 2015-2 2.1 Description 2015-2 2.2 Definitions 2015-2 2.2.1 PCMCIA SIM 201

30、5-2 2.2.2 CardSIM 2015-3 2.2.3 EmbeddedSIM . 2015-3 2.2.4 CDPD Network Operation . 2015-3 2.2.5 CDPD Administrative Management Operation . 20 15-3 2.2.6 Administrative Parties 20 15-3 3 SIM Requirements . 2015-4 3.1.2 Security in CDPD Network Operation . 20 15-4 NE1 Management 201 5-4 3.1.4 PIN Mana

31、gement 2015-4 Personalization Key Management . 2015-5 3.2 Operational Requirements for CDPD Network Operations 201 5-5 3.2.1 General 2015-5 Requirements For CDPD Administrative Management . 201 5-5 3.3.1 General 2015-5 3.3.2 Distribution of SIMs . 2015-5 3.3.3 Personalization of SIMs . 2015-6 3.3.4

32、BlockingKJnblocking of SIM 2015-6 Information Storage Requirements . 201 5-6 Information Connected to Mobile Subscriber 2015-6 3.4. i . 1 Personalization Data 20 15-7 3.1 Security Requirements . 2015-4 3.1.1 General 2015-4 3.1.3 3.1.5 3.3 3.4 3.4.1 4 Man-Machine Interface . 2015-7 5 SIM-SU Protocol

33、2015-7 6 SIM Implementation Dependent Functions 2015-8 6.1 PCMCIA SIM . 2015-8 201 54 STD.EIP . TSB87-2015-ENGL 1777 I3234b00 Ob01515 870 I TIAIEISB-87-2015 Table of Contents 6.2 CUdSIM . 2015-8 6.3 EmbeddedSIM 2015-8 7 SIM-SU Interface 2015-8 Foreword TIAEIAKSB-87-2015 PART 2015 Subscriber Identity

34、 Module Functional Characteristics O Foreword This foreword is not part of this Telecommunications Systems Bulletin. This Telecommunications Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of systems compliant with TSB-87, “Ce

35、llular Digital Packet Data System Specification,” or its derivatives. This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used t

36、o provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. o. 1 Document Structure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining to one aspect of the system. The

37、functional structure of this TSB is as follows: o Part 1000 to Part 1999-Guidelines for Service Providers These Parts are informative and discuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory .- 2015-iii Subscriber identity Module Functional Character

38、istics services, accounting summary and settlement procedures, authentication, etc.), value-added services (such as subscriber location) and Service Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the detailed listing of ail Parts of t

39、his TSB. Part 2000 to Part 2999-Guidelines for Manufacturers of CDPD equipment These Parts are informative and discuss such concerns as CDPD-specific entities (such as Mobile End Systems (M-ESs), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD-ISS), external interfaces (su

40、ch as that between the Subscriber Unit (SU) and the Subscriber Identity Module (SIM) and multicasts from the perspective of each of the participating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center (NIC). These Parts are informative and describe the issues and pro

41、cedures which must be addressed by an agency serving as a NIC on behaif of the CDPD community. e o 201 Siv STD-EIA TSBB7-2015-ENGL 1997 W 3234b00 b015L8 58T M TIA/EIA/TSB-87-2015 Introduction .- PART 2015 Subscriber Identity Module Functional Characteristics 1 Introduction Part 2010 describes how th

42、e Mobile End System (M-ES) consists of three functional subsystems: a Mobile Application Subsystem (MAS), a Subscriber Unit (SU) and a Subscriber Identity Module (SIM). A removable SIM is optional; however, its function must be supported by all M-ESs. This Part describes the functional characteristi

43、cs of the SIM, the contents of the SIM and the interface between the SIM and the SU. This recommendation was originally based on those sections of the GSM specification that defines a Subscriber Identity Module (SIM), a form of “smart card,” for use in the GSM system ETSI-GSM-O.2.1.7-V.4.3.1. It is

44、a requirement that all SIMs are logically and functionally standardized for all CDPD M-ESs, and it is a requirement that removable SIMs are electrically and physically standardized for those CDPD M-ESs that provide this option. The removable SIM shall contain an active CPU element to provide access

45、security to the contents of the SIM. CDPD service may be one of the applications of a multi-service removable SIM. All specifications of the SIM in this recommendation refer to the part of the SIM that is specific for CDPD mobile services. - 201 5-1 STD-EIA TSB87-2015-ENGL 1777 3234b00 ObOL5L7 4Lb T

46、IAJEIAlTSB-87-2015 Subscriber Identity Module Functional Characteristics SIM functions will be updated over time. Forward compatibility shall be assured with regard to the standardization of the network interface functions of the SIM via the SU and with regard to the user-related SIM functions on th

47、e SIM-SU interface. 2 General 2.1 Description 2.2 The removable SIMis a module that is meant to be inserted whenever the subscriber wants to use the M-ES (and may be removed when the M-ES is unattended) or at subscription time. The SIM shall provide storage of subscriber-related temporary data. The

48、SIM contains one or more Network Entity Identifiers (NEIs) and their associated authentication parameters as described in IS-732-4061. The removable SIM has a clearIy defined physical and logical interface with the outside world. A Personal Identification Number (PIN) must be used to provide protect

49、ion against unauthorized use of the SIM. For security reasons, the PIN must be stored and checked within the removable SIM. Definitions 2.2.1 SIM refers to the functional characteristics which are common to all the types of SIMs. The SIM function may exist as a logical element in the SU and cannot be physically removed separately from the SU. Removable SIMs may be physically removed as a separate unit from the SU. There are three t.ypes of removable SIM: o PCMCIASIM o CardSIM o Embedded SIM. PCMCIA SIM This is a module whose interface to the outside world