SMPTE ST 303M-2002 Television - Color Reference Pattern.pdf
《SMPTE ST 303M-2002 Television - Color Reference Pattern.pdf》由会员分享,可在线阅读,更多相关《SMPTE ST 303M-2002 Television - Color Reference Pattern.pdf(13页珍藏版)》请在麦多课文档分享上搜索。
1、1 ScopeThis standard defines the electrical and physical representation of a television color reference pattern. It alsospecifies colorimetry, geometry, and related parameters.2 Colorimetry2.1 Colorimetric data in tables 1, 2, and 3 represent the color reference pattern using white-pointdefinitions
2、for television (D65), studio lighting (3100 K), and film (D55). The data are based on a 2standard observer (CIE S002).2.2 The CIE tristimulus data specified in tables 1, 2, and 3 are aim-point specifications for each colorreference pattern sample.2.3 Common television practice is to set up the camer
3、a for the desired appearance on a D65 monitor,regardless of the original scene illumination. Therefore, tables 4, 5, 6, and 7 are based on D65, andvalues for 3100 K studio lighting are not included. The values in table 8, based on D55, should not beused for television.3 Geometry3.1 The color referen
4、ce pattern is made up of 24 sample colors whose colorimetric designations aredistributed throughout the color television gamut. These samples are square and arranged in four rowsof six samples per row. The first two rows consist of colors that are designed to simulate the colorappearance of natural
5、objects. The third row consists of colors that represent subtractive primaries(cyan, magenta, and yellow) as well as the binary combinations of these colors (red, green, and blue).The last row consists of a six-step neutral gray scale; the neutral numbers are Munsell values.3.2 Each color sample is
6、represented as a square 18% of picture height.3.3 The rows and columns of color samples are separated by black spaces around the color samples.The black spaces are 3% of picture height.3.4 The six columns of color samples are surrounded by a black border on the left and right. The leftand right bord
7、ers are 5% of picture height at 4:3 aspect ratio and 27.5% of picture height at 16:9aspect ratio.for Television Color Reference PatternSMPTE 303M-2002SMPTE STANDARDPage 1 of 13 pagesApprovedAugust 7, 2002Copyright 2002 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS595 W. Hartsdale Ave., W
8、hite Plains, NY 10607(914) 761-1100The four rows of color samples are surrounded by a black border at the top and bottom of the chart. Thetop and bottom borders are defined to be 9.5% of picture height for both 4:3 and 16:9 aspect ratios.Some existing charts have a 5% border and do not provide 4:3 a
9、spect ratio. These older charts should be framedto fill a 4:3 raster horizontally, giving overscan at the top and bottom of the chart. They should be overscannedboth vertically and horizontally in 16:9 applications to match best the geometric specifications of this standard(see figure 1).4 Video col
10、or representations4.1 All video signal levels are calculated using SMPTE RP 177, the standard television system D65white point, and each of the following standard television primary colorimetry definitions: ITU-R BT.709,SMPTE 170M / SMPTE 240M, PAL (EBU), and original NTSC (1953 FCC) (see table 9).
11、In addition, aset of video color representations is calculated using illuminant D55 for only the ITU-R BT.709primaries.4.2 The linear video signal levels in tables 4 through 8 are video voltages ranging between 0.0 V(black) and 1.0 V (white). The user must apply the appropriate gamma or transfer cha
12、racteristic.Because of the number of possible gamma or transfer curves which could be used, no gammacorrection is applied to any of the video representations listed in this standard.4.3 Any color sample having any video levels outside the 0.0 V to 1.0 V range cannot be reproducedusing the reference
13、primaries for that system. For example, the cyan sample 18 results in a negativered value with ITU-R BT.709, PAL, and SMPTE 240M primaries and a D65white point. Both yellowsample 16 and cyan sample 18 result in negative values with illuminant D55and ITU-R BT.709primaries (see figure 2).4.4 The video
14、 signal levels in tables 4 through 8 assume that 1.0 V corresponds to a perfect 100%white reflector.5 Considerations in using the color reference pattern5.1 The color reference pattern should be illuminated and the camera positioned as shown in figure3. The illuminator, camera, and reference pattern
15、 should be in the same horizontal plane. Theilluminator should be positioned to the side at 45 off camera axis. Two illuminators, one on each side,may make it easier to achieve uniform illumination.5.2 The camera should be properly set up using other appropriate test patterns. The gray samples onthi
16、s reference pattern are not intended to be used for setting camera color balance, white levels, orblack levels. The preferred white reference is a 100% reflecting white sample, such as halon or bariumsulfate. Alternately, gain may be set to match the white levels shown in tables 4-8. The preferred b
17、lacklevel reference is a capped lens or light trap.SMPTE 303M-2002 Page 2 of 13 pagesFigure 2 Color reference pattern geometry expressed in percentage of picture height1 2 4 5 6 7 1314 1516 17 18192021 22 23248 9 10 11123 Figure 1 Color reference pattern sample numbersSMPTE 303M-2002 Page 3 of 13 pa
18、gesColor ReferencePattern CameraIlluminator 45Figure 3 Measurement configurationSMPTE 303M-2002 Page 4 of 13 pagesSample number Color name CIE X CIE Y CIE Z1 Dark skin 10.97 9.70 6.062 Light skin 38.12 35.58 25.923 Blue sky 17.86 19.08 34.524 Foliage 10.10 12.98 6.695 Blue flower 25.83 24.38 45.326
19、Bluish green 31.27 42.73 44.697 Orange 36.46 29.32 5.898 Purplish blue 13.42 11.76 37.239 Moderate red 28.45 19.22 13.7510 Purple 8.68 6.52 14.6911 Yellow green 33.20 43.66 11.1912 Orange yellow 46.17 43.12 8.4013 Blue 8.40 6.22 30.0014 Green 14.50 23.58 9.5115 Red 20.17 11.82 5.2016 Yellow 56.05 59
20、.64 9.5617 Magenta 29.42 19.27 30.2918 Cyan 14.47 19.87 39.5219 White 83.98 88.76 92.3520 Neutral 8 55.88 58.87 62.8721 Neutral 6.5 33.67 35.51 38.1122 Neutral 5 18.30 19.30 20.8323 Neutral 3.5 7.96 8.40 9.0624 Black 2.83 2.95 3.22NOTE Assuming CIE illuminant D65relative to CIE 1931 (2) standard obs
21、erver:CIE D65white point: x = 0.3127; y = 0.3290Table 1 Colorimetric specifications with illuminant D65SMPTE 303M-2002 Page 5 of 13 pagesSample number Color name CIE X CIE Y CIE Z1 Dark skin 14.18 10.80 2.352 Light skin 48.32 38.29 10.283 Blue sky 17.23 17.77 13.074 Foliage 11.82 12.74 2.705 Blue fl
22、ower 27.21 23.81 17.126 Bluish green 32.16 39.10 17.907 Orange 49.53 35.09 2.358 Purplish blue 11.44 10.55 13.899 Moderate red 39.18 23.72 5.2110 Purple 9.62 6.88 5.3211 Yellow green 40.39 43.56 4.9912 Orange yellow 60.94 48.69 3.5113 Blue 6.01 5.23 11.1714 Green 15.83 21.84 4.0715 Red 30.23 15.92 1
23、.9916 Yellow 73.31 64.24 4.4517 Magenta 37.96 22.79 11.1418 Cyan 12.05 16.42 15.5919 White 95.41 88.97 35.7920 Neutral 8 63.16 58.94 24.2821 Neutral 6.5 37.98 35.53 14.7022 Neutral 5 20.61 19.30 8.0323 Neutral 3.5 8.95 8.40 3.4924 Black 3.20 2.96 1.24NOTE Assuming 3100 K illumination relative to CIE
24、 1931 (2) standard observer:3100 K (Planckian) white point: x = 0.4299; y = 0.4016Table 2 Colorimetric specifications with illuminant 3100 KSMPTE 303M-2002 Page 6 of 13 pagesSample number Color name CIE X CIE Y CIE Z1 Dark skin 11.38 9.87 5.132 Light skin 39.39 35.98 22.083 Blue sky 17.37 18.86 29.1
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SMPTEST303M2002TELEVISIONCOLORREFERENCEPATTERNPDF

链接地址:http://www.mydoc123.com/p-1046878.html