SANS 60793-2-10-2008 Optical fibres Part 2-10 Product specifications - Sectional specification for category A1 multimode fibres《光学纤维 第2-10部分 产品规格 A1类多模光纤分规范》.pdf

《SANS 60793-2-10-2008 Optical fibres Part 2-10 Product specifications - Sectional specification for category A1 multimode fibres《光学纤维 第2-10部分 产品规格 A1类多模光纤分规范》.pdf》由会员分享，可在线阅读，更多相关《SANS 60793-2-10-2008 Optical fibres Part 2-10 Product specifications - Sectional specification for category A1 multimode fibres《光学纤维 第2-10部分 产品规格 A1类多模光纤分规范》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20789-2 SANS 60793-2-10:2008Edition 3IEC 60793-2-10:2007Edition 3SOUTH AFRICAN NATIONAL STANDARD Optical fibres Part 2-10: Product specifi

4、cations Sectional specification for category A1 multimode fibres This national standard is the identical implementation of IEC 60793-2-10:2007 and is adopted with the permission of the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road groenkloof private

5、 bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 60793-2-10:2008 Edition 3 IEC 60793-2-10:2007 Edition 3 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Co

6、mmittee StanSA SC 74A, Communication technology Fibre optics, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2008. This SANS document supersedes SANS 60793-2-10:2005 (edition 2). INTERNATIONAL

7、STANDARD IECCEINORME INTERNATIONALE60793-2-10Third editionTroisime dition2007-06Optical fibres Part 2-10: Product specifications Sectional specification for category A1 multimode fibres Fibres optiques Partie 2-10: Spcifications de produits Spcification intermdiaire pour les fibres multimodales de c

8、atgorie A1 V Commission Electrotechnique InternationaleInternational Electrotechnical Commission PRICE CODE CODE PRIX For price, see current cataloguePour prix, voir catalogue en vigueur SANS 60793-2-10:2008This s tandard may only be used and printed by approved subscription and freemailing clients

9、of the SABS . 2 60793-2-10 IEC:2007 CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Specifications.7 3.1 Dimensional requirements .7 3.2 Mechanical requirements.9 3.3 Transmission requirements .9 3.4 Environmental requirements11 3.4.1 Mechanical environmental requirements (common to all fi

10、bres in category A1)12 3.4.2 Transmission environmental requirements.12 Annex A (normative) Family specifications for A1a multimode fibres 14 Annex B (normative) Family specifications for A1b multimode fibres 16 Annex C (normative) Family specifications for A1d multimode fibres18 Annex D (normative)

11、 Transmitter centre wavelength and encircled flux (EF), fibre differential mode delay (DMD) and calculated effective modal bandwidth (EMBc) requirements.20 Annex E (informative) Applications supported by A1 fibres.25 Annex F (informative) 1-Gigabit and 10-Gigabit Ethernet applications29 Annex G (inf

12、ormative) Preliminary indications for items needing further study31 Bibliography33 Figure 1 Relation between bandwidths at 850 nm and 1 300 nm 11 Figure D.1 DMD requirements21 Table 1 Dimensional attributes and measurement methods8 Table 2 Requirements common to category A1 fibres.8 Table 3 Addition

13、al attributes required in the family specifications.8 Table 4 Mechanical attributes and measurement methods .9 Table 5 Requirements common to category A1 fibres.9 Table 6 Transmission attributes and measurement methods 9 Table 7 Additional attributes required in family specifications.10 Table 8 Envi

14、ronmental exposure tests .11 Table 9 Attributes measured 11 Table 10 Strip force for environmental tests .12 Table 11 Tensile strength for environmental tests 12 Table 12 Stress corrosion susceptibility for environmental tests.12 Table 13 Change in attenuation for environmental tests.13 Table A.1 Di

15、mensional requirements specific to A1a fibres 14 SANS 60793-2-10:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60793-2-10 IEC:2007 3 Table A.2 Mechanical requirements specific to A1a fibres14 Table A.3 Transmission requirements specific

16、 to A1a fibres.15 Table B.1 Dimensional requirements specific to A1b fibres 16 Table B.2 Mechanical requirements specific to A1b fibres16 Table B.3 Transmission requirements specific to A1b fibres.17 Table C.1 Dimensional requirements specific to A1d fibres 18 Table C.2 Mechanical requirements speci

17、fic to A1d fibres18 Table C.3 Transmission requirements specific to A1d fibres 19 Table D.1 DMD templates 21 Table D.2 DMD interval masks.22 Table D.3 DMD weightings.24 Table E.1 Some internationally standardised applications supported by A1a and A1b fibres 25 Table E.2 Typically used commercial ban

18、dwidth specifications for A1a and A1b graded-index multimode fibres. .26 Table E.3 Cross reference of fibre types and bandwidth cells for this standard and ISO/IEC 1180127 Table F.1 Summary of 1 Gb/s and 10 Gb/s Ethernet requirements and capabilities30 SANS 60793-2-10:2008This s tandard may only be

19、used and printed by approved subscription and freemailing clients of the SABS . 4 60793-2-10 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 2-10: Product specifications Sectional specification for category A1 multimode fibres FOREWORD 1) The International Electrotechnical C

20、ommission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end a

21、nd in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committ

22、ee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accor

23、dance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all int

24、erested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held respon

25、sible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence

26、 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) Al

27、l users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage o

28、r other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publicat

29、ion. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such

30、patent rights. International Standard IEC 60793-2-10 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2004, of which it constitutes a technical revision. Temporarily included

31、 text of the DMD test method has been removed and modifications have been included on the A1a.1 and A1d chromatic dispersion specifications, and A1a.1 numerical aperture has been limited to one class only. The text of this standard is based on the following documents: CDV Report on voting 86A/1046/C

32、DV 86A/1079/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SANS 60793-2-10:2008This s tandard may only be used and printed by

33、approved subscription and freemailing clients of the SABS .60793-2-10 IEC:2007 5 A list of all parts of the IEC 60793 series, published under the general title Optical fibres, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until

34、 the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. SANS 60793-2-10:2008This s tandard may only be used and p

35、rinted by approved subscription and freemailing clients of the SABS . 6 60793-2-10 IEC:2007 OPTICAL FIBRES Part 2-10: Product specifications Sectional specification for category A1 multimode fibres 1 Scope This part of IEC 60793 is applicable to optical fibre types A1a, A1b, and A1d. These fibres ar

36、e used or can be incorporated in information transmission equipment and optical fibre cables. Type A1a fibre is a 50/125 m graded index fibre. Type A1a.1 applies to 50/125 m fibre, while A1a.2 applies to 850 nm laser-optimised 50/125 m fibre. Type A1b applies to 62,5/125 m graded index fibre and A1d

37、 applies to 100/140 m graded index fibre. Other applications include, but are not restricted to, the following: short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services; on-premises intra-building and inter-building fibre installatio

38、ns including LANs, PBXs, video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. Three types of requirements apply to these fibres: general requirements, as defined in IEC 60793-2; specific requirements common to the category A1 multimode fibres covered i

39、n this standard and which are given in Clause 3; particular requirements applicable to individual fibre types or specific applications, which are defined in the normative family specification annexes. 2 Normative references The following referenced documents are indispensable for the application of

40、this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-1-1:2002, Optical fibres Part 1-1: Measurement methods and test procedures General and guidance IEC 60793-1-20, Opt

41、ical fibres Part 1-20: Measurement methods and test procedures Fibre geometry IEC 60793-1-21, Optical fibres Part 1-21: Measurement methods and test procedures Coating geometry IEC 60793-1-22, Optical fibres Part 1-22: Measurement methods and test procedures Length measurement IEC 60793-1-30, Optica

42、l fibres Part 1-30: Measurement methods and test procedures Fibre proof test IEC 60793-1-31, Optical fibres Part 1-31: Measurement methods and test procedures Tensile strength IEC 60793-1-32, Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability IEC 60793-1-33, Opti

43、cal fibres Part 1-33: Measurement methods and test procedures Stress corrosion susceptibility IEC 60793-1-34, Optical fibres Part 1-34: Measurement methods and test procedures Fibre curl SANS 60793-2-10:2008This s tandard may only be used and printed by approved subscription and freemailing clients

44、of the SABS .60793-2-10 IEC:2007 7 IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-1-41, Optical fibres Part 1-41: Measurement methods and test procedures Bandwidth IEC 60793-1-42, Optical fibres Part 1-42: Measurement methods and test procedur

45、es Chromatic dispersion IEC 60793-1-43, Optical fibres Part 1-43: Measurement methods and test procedures Numerical aperture IEC 60793-1-46, Optical fibres Part 1-46: Measurement methods and test procedures Monitoring of changes in optical transmittance IEC 60793-1-47, Optical fibres Part 1-47: Meas

46、urement methods and test procedures Macrobending loss IEC 60793-1-49, Optical fibres Part 1-49: Measurement methods and test procedures Differential mode delay IEC 60793-1-50, Optical fibres Part 1-50: Measurement methods and test procedures Damp heat (steady state) IEC 60793-1-51, Optical fibres Pa

47、rt 1-51: Measurement methods and test procedures Dry heat IEC 60793-1-52, Optical fibres Part 1-52: Measurement methods and test procedures Change of temperature IEC 60793-1-53, Optical fibres Part 1-53: Measurement methods and test procedures Water immersion IEC 60793-2:2003, Optical fibres Part 2:

48、 Product specifications General IEC 60794-1-1, Optical fibre cables Part 1-1: Generic specification General IEC 61280-1-4, Fibre optic communication subsystem test procedures Part 1-4: General communication subsystems Collection and reduction of two-dimensional nearfield data for multimode fibre las

49、er transmitters IEC/TR 62048, Optical fibres Reliability Power law theory 3 Specifications The fibre shall consist of a glass core with a graded index profile and a glass cladding in accordance with 5.1 in IEC 60793-2. The term “glass” usually refers to material consisting of non-metallic oxides. 3.1 Dimensi