SAE AS INDEX-2017 Aerospace Standards Index - 2017.pdf

《SAE AS INDEX-2017 Aerospace Standards Index - 2017.pdf》由会员分享，可在线阅读，更多相关《SAE AS INDEX-2017 Aerospace Standards Index - 2017.pdf（498页珍藏版）》请在麦多课文档分享上搜索。

1、SAE INTERNATIONAL AEROSPACE STANDARDS INDEX 2017 AEROSPACE STANDARDS AEROSPACE RECOMMENDED PRACTICES AEROSPACE INFORMATION REPORTS AEROSPACE RESOURCE DOCUMENTS METRIC AEROSPACE STANDARDS AND RECOMMENDED PRACTICESWarrendale, Pennsylvania, USA SAE AEROSPACE STANDARDS INDEX Aerospace Standards (includi

2、ng Converted Military Specifications) Aerospace Recommended Practices Aerospace Information Reports Aerospace Resource Documents Metric Aerospace Standards and Recommended Practices 2017ii All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitte

3、d, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. For permission and licensing requests, contact: SAE Permissions 400 Commonwealth Drive Warrendale, PA 15096-0001 USA E-mail: permissionssae.org Tel: 724-772-402

4、8 Fax: 724-772-4891 The information contained in this book is current at the time of production. Changes and updates sometimes occur after the book is already in production. For the most current information on AS Standards, check the SAE website at www.sae.org, or call SAE Customer Service. Copies o

5、f the AS Standards listed in this Index are available for download at http:/ /www.sae.org/products/dlabout.htm or by contacting SAE Customer Service at Tel: 877-606-7323 (inside USA and Canada)724-776-4970 (outside USA) Fax: 724-776-1615 E-mail: CustomerServicesae.org Copyright 2017 SAE Internationa

6、l ISBN: 1056-1899 ISBN: 978-0-7680-8381-1 Printed in the United States of America. iii PREFACE SAE Aerospace has a distinguished history in aerospace that is unrivaled by other technical societies. SAE is an international technical society representing approximately 100,000 members in diverse engine

7、ering fields of the mobility industry. As far back as 1910, SAE recognized the potential benefits of developing and using standards for the aerospace industry. In 1916, the American Society of Aeronautic Engineers merged with SAE as a result of a U.S. Naval Consulting Board recommendation to address

8、 aviation issues. Today, SAE Aerospace continues to serve as the reservoir for knowledge and new thinking in the aerospace industry. In fact, SAE Aerospace is the worlds largest developer of aerospace industry consensus standards. Standards are used extensively by airlines, manufacturers, suppliers,

9、 and government agencies around the world. SAE standards play a key role in market access, safety, cutting costs, increasing productivity, improving market position, and advancing new technologies. Standards development is giving companies the opportunity to advance their concerns, ideas, and techno

10、logies. There are more than 60 committees under the Aerospace Council, with numerous subcommittees and task groups involved in the development and review of SAE aerospace standards and recommended practices. Committees composed of business leaders, engineers, and educators develop each standard. SAE

11、 committees endeavor to balance the user/supplier composition of the committee. A committee deals with a specific subject vital to a particular market or engineering discipline. SAE coordination policy requires “due process” for every standards-related request/action. The committee utilizes a rigoro

12、us process to ensure validity, industry consensus, and consumer safety. The aerospace industry has a unique opportunity through SAE to work directly with the Federal Aviation Administration (FAA) and the Department of Defense (DOD). Federal directives encourage increased cooperation among SAE, the D

13、OD, and the FAA; therefore, participating companies have input into the development of the recommended practice/standard with which they may have to comply. SAE is a primary non-government standards development body for the conversion of Department of Defense standards and specifications. SAE is an

14、active participant in the Aerospace Industries Association (AIA) Early Warning Project Group. The Early Warning Project Group is designed to help identify and direct DOD conversion efforts to the appropriate standards body. SAE Aerospace Council provides direction on the military specifications conv

15、ersion in the committee structure. Specific attention is directed at establishing a common procedure for part numbering and approval authority. To ensure technical equivalency, SAEs Aerospace Council ratified an accelerated approval procedure for the military specifications conversion process, which

16、 involved 1) a word-for-word conversion, 2) retention of the existing part number, and 3) retention of the military specifications document number.iv TABLE OF CONTENTS SAE Aerospace Standards Products .v Users Guide vi SAE Aerospace Council Organization Chart viii Section INumerical Index . 1 Sectio

17、n IISubject Index 140 Ordering Information and Order Form A1A3v SAE STANDARDS PRODUCTS Individual Standards, Recommended Practices, and Information Reports Each individual Aerospace document can be ordered for $76.00 eachprint, download, or fax (unless otherwise noted). To order an SAE Standard, cal

18、l (877) 606-7323 (U.S.A. and Canada) or (724) 776-4970; e-mail to CustomerServicesae.org; or visit our website at www.sae.org/standards. Quantity Discounts (print only) Quantity discounts are available for purchasing multiple copies of the same standard: 2575 copies of the same standard 25% discount

19、 off list price 76 or more copies of the same standard 30% discount off list price Note: No discount is offered to Standards Committee members. Aerospace Material Specifications (AMS) SAE has been the source of Aerospace Materials Specifications since 1939 when the SAE Aircraft Materials Division is

20、sued the original 101 specifications. Today, there are approximately 3,290 documents that offer comprehensive data on chemical composition, special properties, tolerance, quality controls, and processes for all materials used in aerospace vehicles. These materials include titanium, iron, corrosion a

21、nd heat resistant steels, aluminum, magnesium, copper, non-metallics, miscellaneous nonferrous alloys, refractory and reactive materials, and more. More than 1,270 AMS documents have been adopted by the Department of Defense and are listed in the DOD Index of Specifications and Standards (DODISS). A

22、MS have also been accepted by ANSI as American National Standards. Converted Military Specifications also are included in all AMS products. AMS Complete Collections 2016 AMS Complete Set$5,810 domestic; $5,960 overseas This set contains all current documents issued by the SAE Aerospace Materials Div

23、ision and its committees. 2017 AMS Annual Update Service$6,100; domestic; $6,285 overseas Designed for users who require frequent/regular access to the most current AMS documents. Each month this service provides all the new and revised AMS documents. AMS Complete Set $12,443 overseas Designed for f

24、irst-time users who require access to all AMS documents. SAE AMS IndexContains all AMS documents currently available. Documents are referenced by number, key word, and subject. Published each January and July. Price: $126.00 List Each individual AMS document can be ordered for $76.00 eachprint, down

25、load, or fax (unless otherwise noted). To order an SAE Standard, call (877) 606-7323 (U.S.A. and Canada) or (724) 776-4970; fax (724) 776-1615; e-mail to CustomerServicesae. org; or visit our website at www.sae.org/standards.vi USERS GUIDE Research for specific SAE Aerospace Standards, Recommended P

26、ractices, Aerospace Resource Documents, or Information Reports can be conducted using either the Aerospace Technical Report number or a specific subject area. The Numerical Index conveniently lists all available Aerospace Technical Reports in numerical order. The Subject Index groups all Aerospace T

27、echnical Reports into specific topic areas. At a glance, you can determine which individual Aerospace Technical Report deals with a generic area such as materials, hardware, testing, or reliability, or with a specific system such as hydraulic, oxygen, or duct systems. Throughout this Index, several

28、symbols are used to convey important information: * Highlights that the Aerospace Technical Report is new or revised and appearing for the first time in this edition of the Index. All SAE Aerospace Standards, Recommended Practices, and Information Reports are reviewed for currency on a regular basis

29、 by the various SAE Technical Committees. New and revised SAE Aerospace Technical Reports are issued on a monthly basis. AIR Aerospace Information Report AMS Aerospace Material Specification ARD Aerospace Resource Document ARP Aerospace Recommended Practice AS Aerospace Standard MA Metric Aerospace

30、Standard MAP Metric Aerospace Recommended Practice EIA, GEIA, HEB, SSB, TA, TB Formerly TechAmerica Standards All CANCELLED documents are listed in the Numerical Index. These have been cancelled because the aircraft industry no longer requires them. All documents are available individually. Prices a

31、re listed in the Numerical Index. Use the Order Form at the back of this book.viii AEROSPACE MECHANICAL & FLUID SYSTEMS GROUP COMMITTEES Chair: Sanford Fleishman AEROSPACE ELECTRONICS &ELECTRICAL SYSTEMS GROUP COMMITTEES Chair: Jim Ide AEROSPACE GENERAL PROJECTS SYSTEMS GROUP COMMITTEES Chair: John

32、Dalton AIRCRAFT SYSTEMS GROUP COMMITTEES Chair: Robert Garner AIRPORT/GROUND OPERATIONS AND EQUIPMENT SYSTEMS GROUP COMMITTEES Chair: Jeffery Walsh AGE-2 Air Cargo & Aircraft Ground Equipment & Systems Steering GroupAGE-2A Cargo HandlingAGE-2C Vehicle Maint & Aircraft ServicingAGE-2D Packaging, Hand

33、ling and Transportability G-12 Aircraft Ground Deicing Steering GroupG-12ADF Aircraft Deicing FluidsG-12DF Deicing FacilitiesG-12HOT Hold-over TestingG-12M Methods G-12E Equipment G-12ID Ice Detection G-12RDF Runway Deicing FluidsG-12T Training & Quality Program G-12FG Future Deicing G-15 Airport Sn

34、ow & Ice Control Equipment G-10 Aerospace Behavioral Engineering Technology(ABET) Steering GroupG-10A Aeronautical Information SystemG-10EAB Executive Advisory GroupG-10D Color DisplayG-10E Enhanced Vision/Synthetic Vision SystemsG-10G Realistic TrainingG-10J ChartingG-10M Multi-Function DisplayG-10

35、OL Operational LasersG-10P Perspective Flight Guidance G-10T Laser Safety Hazards G-10U Unmanned Aerospace SystemsG-10V Vertical Flight G-10W Weather Information SystemsG-10WV Wake VortexG-10TDS Touch Interactive Display SystemsG-10HWD Head Worn Display S-18 Aircraft & Systems Development and Safety

36、 Assessment G-13 Human Modeling Technology Standards G-14 Americas Aerospace Quality Standards G-16 Aviation Fuel Operations G-17 Human Factors in Aerospace Maintenance G-18 Radio Frequency Identification (RFID) Aerospace Applications G-19 Counterfeit Electronic PartsG19A Test Laboratory Standards D

37、evelopmentG-19AD Authorized DistributorG-19C Standard Compliance VerificationG19CI Continuous ImprovementG19D DistributorG19DR Distributor Risk CharacterizationG19T Terms and Definitions G-20 Airport Lighting G-21 Counterfeit Materiel HM-1* Integrated Vehicle Health Management (IVHM) E-1 Environment

38、al G-22 Aerospace Engine Supplier Quality (AESQ) G-23 Manufacturing Management G-24 Pb - free Risk Management Committee for ADHP G-25 Avionics/Electronics Corrosion CS Commercial Space G-26 Helicopter Hoists G-27 Lithium Battery Packaging Performance Becky Lemon Rebecca.Lemonsae.org Bruce Mahone (Wa

39、shington Operations) Bruce.Mahonesae.org Cindy Kolch Cindy.Kolchsae.org David Alexander (Interim Director) David.Alexandersae.org Dorothy Lloyd Dorothy.Lloydsae.org John Clatworthy (Aero Standards Europe) John.Clatworthysae.org Jordanna Lehman Jordanna.Lehmansae.org Kerri Rohall Kerri.Rohallsae.org

40、Kevin Bires Kevin.Biressae.org Laura Feix (New Business Development) Laura.Feixsae.org Logen Johnson (Washington Operations) Logen.Johnsonsae.org Mark DeAngelo Mark.DeAngelosae.org Maureen Lemankiewicz Maureen.Lemankiewiczsae.org Nicole Mattern Nicole.Matternsae.org Rhonda Joseph Rhonda.Josephsae.or

41、g Sonal Khunti Sonal.Khuntisae.org AE-2 Lightning AE-4 Electromagnetic Environmental Effects (E3)AE-4EMC Civil Aircraft EMC Working Group AE-7 Aerospace Electrical Power & EquipmentAE-7A Generators/Controls/ Magnetic DevicesAE-7B Power Management, Distribution & StorageAE-7C Systems AE-7EU EuropeAE-

42、7M Aerospace Model Based Engineering AE-8 Aerospace Electrical/Electronic Distribution Systems Steering GroupAE-8A Electrical Wiring & Fiber Optic Interconnect Systems InstallationAE-8B Protective and Control DevicesAE-8C1 ConnectorsAE-8C2 Terminating Devices & ToolingAE-8D Wire & Cable A-4 Aircraft

43、 InstrumentsA-4ED Electronic Display A-4 HD Head Up Displays A-4 ULD Underwater Locator DevicesA-4 ADWG Air Data Working GroupA-4 EFIS, Electronic Flight Instrument System Display A-5* Aerospace Landing Gear SystemsA-5A Wheels, Brakes & Skid Controls A-5B Gears, Struts & Couplings A-5C Aircraft Tire

44、s A-10 Aircraft Oxygen Equipment A-20 Aircraft Lighting Steering GroupA-20A Crew Station Lighting A-20B Exterior LightingA-20C Interior Lighting A-21 Aircraft Noise Measure and Noise Aviation Emission Modeling AC-9 Aircraft Environmental Systems AC-9C Aircraft Icing Technology S-7 Flight Deck & Hand

45、ling Qualities Strds for Transport Aircraft S-9 Cabin Safety ProvisionsS-9A Safety Equipment & Survival Systems S-9B Cabin Interiors & Furnishings S-9C Operational & Human Factors Issues S-9FEWG Fire Extinguisher TG AIRCRAFT SEAT ACBG Airframe Control Bearings Steering GroupACBG-1 Plain BearingACBG-

46、2 Rolling Element A-6* Aerospace Actuation, Control and Fluid Power Systems Steering GroupA-6A Systems/Sub-system Integration TGA-6A1 Commercial AircraftA-6A2 Military AircraftA-6A3 Flight Control Systems A-6B Actuation and Control TGA-6B1 Hydraulic Servo ActuationA-6B2 EHA/IAPA-6B3 Electro-Mechanic

47、al ActuationA-6C Power Generation & Distribution TGA-6C1 Contamination & FiltrationA-6C2 SealsA-6C3 FluidsA-6C4 Power Sources A-6C5 Components AE-5* Aerospace Fuel, Inerting & Lubrication Systems Steering GroupAE-5A Aerospace Fuel, Inerting & Lubrication SystemsAE-5B Aircraft and Engine Fuel and Lub

48、ricant Systems ComponentsAE-5C Aviation Ground Fueling SystemsAE-5D Fuel Tank Flammability Reduction Systems G-3 Aerospace Couplings, Fittings, Hose and Tubing Assemblies ISO/TC20/SC10 U.S. SCAG PRI-QPL/QML PanelG-3A Aerospace Couplings TGG-3B Aerospace Fittings TGG-3C AS-EN HarmonizationG-3D Aerosp

49、ace Hose TGG-3E Aerospace Tubing Installation TG TECHNICAL STANDARDS BOARD SAE Aerospace Council Organization Chart SAE Aerospace Council Organization Chart SAE Aerospace Council Organization Chart www.sae.org/standards/ Asia Room 2503, Litong Plaza, No. 1350 North Sichuan Road, Hongkou District, Shanghai, 200080, P.R. China +86.21.6140.8900 Americas 400 Commonwealth Drive Warrendale, PA 15096 USA +1.877.606.7323 +1.724.776.4970 CustomerServicesae.org Europe 1 York Street London, W1U 6PA, UK +44 (0) 20.