SAE AS 85049 31B-2009 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL NONENVIRONMENTAL STRAIGHT NON-SELF-LOCKING AND SELF-LOCKING CATEGORY 3B (FOR MIL-DTL-5015 CRIMP MIL-DTL-26482 SERIE.pdf

《SAE AS 85049 31B-2009 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL NONENVIRONMENTAL STRAIGHT NON-SELF-LOCKING AND SELF-LOCKING CATEGORY 3B (FOR MIL-DTL-5015 CRIMP MIL-DTL-26482 SERIE.pdf》由会员分享，可在线阅读，更多相关《SAE AS 85049 31B-2009 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL NONENVIRONMENTAL STRAIGHT NON-SELF-LOCKING AND SELF-LOCKING CATEGORY 3B (FOR MIL-DTL-5015 CRIMP MIL-DTL-26482 SERIE.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/31Copyright 2014 SAE International All right

2、s reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA an

3、d Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1998-08REVISED 2009-07 REAFFIRMED 2014-09THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.B FEDERAL SUPPLY CLASS 5935 AS85049/31 SHEET 1 OF 4 REV. B PROCUREMENT SPE

4、CIFICATION: AS85049SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineeringsciences.The useofthis reportisentirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising ther

5、efrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit htt

6、p:/www.sae.org/technical/standards/AS85049/31B RATIONALE AS85049/31B HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. THE REQUIREMENTS FOR ACQUIRING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATION

7、 AND DIMENSIONS AEROSPACE STANDARD AS85049/31 SHEET 2 OF 4 REV. B CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE

8、1A - DASH NUMBERS, SHELL SIZE AND DIMENSIONS (NONSELF-LOCKING) DASH NUMBER FOR CONNECTOR SHELL SIZE (REF) NONSELF-LOCKING AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 MIL-DTL-5015 CRIMP MIL-DTL-83723 SERIES III A MAX B MAX C MAX E MAX -3 3 .669 (16.99) .220 (5.59) .540 (13.72) .270 (6.86) -8 8 8S 8 .617

9、(15.67) .270 (6.86) -10 10 10S, 10SL 10 .734 (18.64) .375 (9.53) -12 7 12 12S, 12 12 .858 (21.79) .511 (12.98) -14 12 14 14S, 14 14 .984 (24.99) .585 (14.86) -16 19 16 16S, 16 16 1.112 (28.24) .710 (18.03) -18 27 18 18 18 1.218 (30.94) .789 (20.05)-20 37 20 20 20 1.345 (34.16) .914 (23.22) -22 22 22

10、 22 1.468 (37.29) 1.039 (26.39)-24 24 24 24 1.593 (40.46) .540 (13.72) 1.154 (29.31)-28 28 1.969 (50.01) .702 (17.83) 1.389 (35.28)-32 32 2.219 (56.36) 1.635 (41.53)-36 36 2.469 (62.71) 1.850 (46.99)-40 40 2.719 (69.06) 2.065 (52.45)-44 44 2.969 (75.41) 2.320 (58.93)-48 48 3.219 (81.76) .702 (17.83)

11、 2.570 (65.28)-61 61 1.653 (41.99) .220 (5.59) .540 (13.72) 1.194 (30.33)TABLE 1B - DASH NUMBERS, SHELL SIZE AND DIMENSIONS (SELF-LOCKING) DASH NUMBER FOR CONNECTOR SHELL SIZE (REF) SELF-LOCKING AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 MIL-DTL-5015 CRIMP MIL-DTL-83723 SERIES III A MAX B MAX C MAX E M

12、AX -3 3 -8 8 8S 8 .885 (22.48) .39 (9.91) .710 (18.03) .270 (6.86) -10 10 10S, 10SL 10 1.010 (25.65) .375 (9.53) -12 7 12 12S, 12 12 1.135 (28.83) .511 (12.98) -14 12 14 14S, 14 14 1.260 (32.00 .585 (14.86) -16 19 16 16S, 16 16 1.385 (35.18) .710 (18.03) -18 27 18 18 18 1.510 (38.35) .789 (20.05)-20

13、 37 20 20 20 1.635 (41.53) .914 (23.22) -22 22 22 22 1.760 (44.70) 1.039 (26.39)-24 24 24 24 1.885 (47.88) .39 (9.91) .710 (18.03) 1.154 (29.31)-28 28 2.135 (54.23) .41 (10.41) .890 (22.61) 1.389 (35.28)-32 32 2.395 (60.83) 1.635 (41.53)-36 36 2.635 (66.93) 1.850 (46.99)-40 40 2.885 (73.28) 2.065 (5

14、2.45)-44 44 3.135 (79.63) 2.320 (58.93)-48 48 3.385 (85.98) .41 (10.41) .890 (22.61) 2.570 (65.28)-61 61 NOTES 1. DIMENSIONS ARE IN INCHES. 2. METRIC EQUIVALENTS ARE BASED UPON 1.00 INCH = 25.4 MM AND SHALL BE IN ACCORDANCE WITH ASTM E 380, PARAGRAPH 4.5, METHOD A AND ASTM E 29, ROUNDING-OFF METHOD.

15、 3. DIMENSIONS APPLY AFTER PLATING. 4. MEASURED FROM THE ROOT OF THE TOOTH TO THE BACK OF THE COUPLING NUT. AEROSPACE STANDARD AS85049/31 SHEET 3 OF 4 REV. B CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRI

16、MP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)REQUIREMENTS 1. DESIGN AND CONSTRUCTION DIMENSIONS AND CONFIGURATIONS: SEE FIGURE 1 AND TABLE 1A “S” FOR DETENTED SELF-LOCKING (SEE REQMT 4) “N” FOR NON-DETENTED SELF-LOCKING “-“ (DASH) FOR NON-SELF-LOCKING DASH NU

17、MBER FINISH (SEE TABLE 2) SUPERSESSION DATA: SPECIFICATION NOTES NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER

18、IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.