SAE AS 10380-1998 Coupling Installations Standard Conduit Electrical《FSC 5975带电接头装置的标准管道》.pdf

《SAE AS 10380-1998 Coupling Installations Standard Conduit Electrical《FSC 5975带电接头装置的标准管道》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 10380-1998 Coupling Installations Standard Conduit Electrical《FSC 5975带电接头装置的标准管道》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、SAE-AS10380ADOPTION NOTICESAE-AS10380, “COUPLING INSTALLATIONS, STANDARD CONDUIT,ELECTRICAL“, was adopted on 30-MAY-98 for use by the Departmentof Defense (DoD). Proposed changes by DoD activities must besubmitted to the DoD Adopting Activity: Commander, Naval AirWarfare Center, Aircraft Division, C

2、ode 414100B120-3, Highway547, Lakehurst, NJ 08733-5100. Copies of this document may bepurchased from the Society of Automotive Engineers 400Commonwealth Drive Warrendale, Pennsylvania, United States,15096-0001. http:/www.sae.org/_Custodians: Adopting Activity:Navy - ASArmy - CR1Navy - ASAir Force -

3、11FSC 5975DISTRIBUTION STATEMENT A: Approved for public release; distributionis unlimited.Copyright 1998 Society of Automotive Engineers, Inc. Printed in the U.S.A.All rights reserved. .QUESTIONS REGARDING THIS DOCUMENT: (724) 772-8510 FAX: (724) 776-0243 SAE WEB ADDRESS: http:/www.sae.org400 Common

4、wealth Drive, Warrendale, PA 15096-0001SAE Technical StandardsBoard Rulesprovidethat:“Thisreport is published by SAEtoadvance thestateoftechnical and engineeringsciences. The useofthis reportisentirelyvoluntary, and its applicabilityand suitability for any particularuse, includingany patent infringe

5、ment arising therefrom, isthe soleresponsibility of the user.”SAE reviews each technical report at least every five years at whichtime it maybereaffirmed, revised, or cancelled. SAE invites your writtencomments and suggestions.SHEET 1 OF 3AS10380AEROSPACE STANDARDSubmitted for recognition as an Amer

6、ican National StandardAS10380ISSUED1998-03COUPLING INSTALLATIONS,STANDARD CONDUIT, ELECTRICALPREPARED BY SAE SUBCOMMITTEE AE-8A, SYSTEM INSTALLATIONFEDERAL SUPPLY CLASS 5975NOTICETHIS DOCUMENT HAS BEEN TAKEN DIRECTLY FROM U.S. MILITARY SPECIFICATION AND10380 REV 4 AND CONTAINS ONLY MINOR EDITORIAL A

7、ND FORMAT CHANGES REQUIRED TO BRING IT INTO CONFORMANCE WITH THE PUBLISHING REQUIREMENTS OF SAE TECHNICAL STANDARDS. THE INITIAL RELEASE OF THIS DOCUMENT IS INTENDED TO REPLACE AND10380 REV 4. ANY PART NUMBERS ESTABLISHED BY THE ORIGINAL SPECIFICATION REMAIN UNCHANGED.THE ORIGINAL MILITARY SPECIFICA

8、TION WAS ADOPTED AS AN SAE STANDARD UNDER THE PROVISIONS OF THE SAE TECHNICAL STANDARDS BOARD (TSB) RULES AND REGULATIONS (TSB 001) PERTAINING TO ACCELERATED ADOPTION OF GOVERNMENT SPECIFICATIONS AND STANDARDS. TSB RULES PROVIDE FOR (A) THE PUBLICATION OF PORTIONS OF UNREVISED GOVERNMENT SPECIFICATI

9、ONS AND STANDARDS WITHOUT CONSENSUS VOTING AT THE SAE COMMITTEE LEVEL, AND (B) THE USE OF THE EXISTING GOVERNMENT SPECIFICATION OR STANDARD FORMAT.ANY MATERIAL RELATING TO QUALIFIED PRODUCT LISTS HAS NOT BEEN ADOPTED BY SAE. THIS MATERIAL WAS PART OF THE ORIGINAL MILITARY SPECIFICATION AND IS REPRIN

10、TED HERE FOR HISTORIC REFERENCE ONLY.400 Commonwealth Drive, Warrendale, PA 15096-0001 COUPLING INSTALLATIONS,STANDARD CONDUIT, ELECTRICALAEROSPACE STANDARD AS10380SHEET 2 OF 3AS10380THE REQUIREMENTS FOR ACQUIRING THE PRODUCT(S) DESCRIBED HEREIN SHALL CONSIST OF THIS DESIGN STANDARD AND THE ISSUE OF

11、 THE FOLLOWING DOCUMENT LISTED IN THAT ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION: NONE.400 Commonwealth Drive, Warrendale, PA 15096-0001 COUPLING INSTALLATIONS,STANDARD CONDUIT, ELECTRICALAEROSPACE STANDARD AS10380SHEET 3 OF 3AS10380REQUIREMENTS:1. FERRULES SHALL BE CRIMPED TO THE FLEXIBLE C

12、ONDUIT BY A SUITABLE PRESS AND MUST BE ABLE TO WITHSTAND A DIRECT PULL OF 50 LB WITHOUT SEPARATING FROM THE CONDUIT.2. FLEXIBLE CONDUIT AND FERRULES OR RIGID CONDUIT AND FERRULES MAY BE CONNECTED INTERCHANGEABLY, SIZE FOR SIZE, TO ALL COUPLINGS WITH THE EXCEPTION OF THE STRAIGHT BOSS AND10051 TYPE I

13、I, WHICH IS ADAPTABLE TO FLEXIBLE CONDUIT ONLY.3. BEFORE ASSEMBLY IN A CONDUIT INSTALLATION, WIPE COUPLINGS WITH A DRY CLOTH OR SOFT PAPER TOWEL TO REMOVE EXCESS PETROLATUM, THEN DIP IN AN APPROPRIATE CLEANING SOLVENT, SEMI-AQUEOUS, OR AQUEOUS CLEANER. ALL CLEANERS SHALL BE COMPATIBLE WITH THE COUPL

14、INGS. ALL PARTS SHALL BE COMPLETELY DRY. PRIOR TO ASSEMBLY AND USE, TREAT ALL THREADED AREAS WITH ANTI-SEIZE COMPOUND CONSISTING OF 50% PETROLATUM AND 50% ZINC DUST BY WEIGHT.4. CARE MUST BE TAKEN THAT NO SHARP EDGES ARE LEFT ON THE ENDS OF RIGID CONDUIT AND CONDUIT COUPLINGS WHICH MAY CHAFE THE INS

15、ULATION OF CABLE AFTER INSTALLATION. ALL SHARP EDGES SHALL BE REMOVED BY REAHING TO A MINIMUM OF 1/16 INCH RADIUS.5. IN ALL INSTALLATIONS WHERE CONDUIT IS NOT USED, THE CABLE SHALL BE ANCHORED TO THE BOX CONNECTOR WITH MIL-C-85049/1 ADAPTER.NOTES:1. THIS IS A DESIGN STANDARD NOT TO USE AS A PART NUM

16、BER.2. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS STANDARD AND THE REFERENCES CITED HEREIN, THE TEXT OF THIS STANDARD SHALL TAKE PRECEDENCE.3. REFERENCED GOVERNMENT (OR NON-GOVERNMENT) DOCUMENTS OF THE ISSUE LISTED IN THAT ISSUE OF THE DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS (DoDISS) SPECIFIED IN THE SOLICITATION FORM A PART OF THIS STANDARD TO THE EXTENT SPECIFIED HEREIN.4. CHANGED FSC CLASS FROM “4730” TO “5975”.