REG NASA-LLIS-0982-2001 Lessons Learned Retention of Traceability Data for EEE Parts.pdf
《REG NASA-LLIS-0982-2001 Lessons Learned Retention of Traceability Data for EEE Parts.pdf》由会员分享,可在线阅读,更多相关《REG NASA-LLIS-0982-2001 Lessons Learned Retention of Traceability Data for EEE Parts.pdf(4页珍藏版)》请在麦多课文档分享上搜索。
1、Lessons Learned Entry: 0982Lesson Info:a71 Lesson Number: 0982a71 Lesson Date: 2001-04-17a71 Submitting Organization: GSFCa71 Submitted by: Mike Sampson and Jay BrusseSubject: Retention of Traceability Data for EEE Parts Description of Driving Event: Effective, critical traceability of EEE parts may
2、 be lost if original shipping containers and documentation are not retained by original equipment manufacturers (OEMs) and their contractors.Lesson(s) Learned: Recently, NASA Goddard Space Flight Center (GSFC) has observed that many hardware builders repackage EEE parts during receiving inspection a
3、nd discard the part manufacturers original shipping containers. This practice can lead to loss of vital lot traceability information because in many cases, the shipping containers contain unique lot information that may not be provided by the part markings or other shipping documentation (Certificat
4、es of Compliance, etc.) that is typically retained by the user. This problem may also occur if the user discards the paperwork and/or packaging when all the parts in the package have been used.Accurate and detailed EEE part lot traceability information may be critical in order to perform risk assess
5、ments, circuit performance analysis and failure investigations especially when problems are reported for parts that may already be assembled into hardware or when troubleshooting on-orbit anomalies. The EEE part manufacturer generally establishes lot traceability through a combination of the manufac
6、turers part number, CAGE code and a unique “production“ Lot Date Code (LDC). Generally speaking, the “production“ LDC identifies a group of parts of the same style and ratings that are manufactured from the same raw material lots and are processed through all critical manufacturing steps and tests a
7、s a single group. As such, the “production“ LDC is an invaluable lot identifier. Unfortunately, this “production“ LDC is generally NOT marked directly on the parts (especially for smaller “chip“ style components where there may be insufficient room for any part markings) and is sometimes only provid
8、ed to the user on labels affixed to the original shipping containers for the parts (i.e., C of C may not contain “production“ LDC info).Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-It is important to note that a “production“ LDC is not the same as
9、 the “inspection“ LDC (or “marking“ LDC) which is commonly marked directly on the part and shipping documentation. (For MIL specification products, the LDC marked on the parts is the “inspection“ LDC). The “inspection“ LDC generally represents the year and week when a group of parts is subjected to
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- REGNASALLIS09822001LESSONSLEARNEDRETENTIONOFTRACEABILITYDATAFOREEEPARTSPDF

链接地址:http://www.mydoc123.com/p-1018627.html