PAS 121-2007 Specification for active nfire curtain barrier nassemblies and active nfire curtain barrier nassemblies with smoke nrating《带有排烟等级的活动屏蔽挡火墙组装件和活动挡火墙组装件的规范》.pdf

《PAS 121-2007 Specification for active nfire curtain barrier nassemblies and active nfire curtain barrier nassemblies with smoke nrating《带有排烟等级的活动屏蔽挡火墙组装件和活动挡火墙组装件的规范》.pdf》由会员分享，可在线阅读，更多相关《PAS 121-2007 Specification for active nfire curtain barrier nassemblies and active nfire curtain barrier nassemblies with smoke nrating《带有排烟等级的活动屏蔽挡火墙组装件和活动挡火墙组装件的规范》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、PAS 121:2007Specification for active fire curtain barrier assemblies and active fire curtain barrier assemblies with smoke ratingICS 13.220.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWPUBLICLY AVAILABLE SPECIFICATIONLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 0

2、6/12/2007 07:10, Uncontrolled Copy, (c) BSIPublishing and copyright informationThe BSI copyright notice displayed in this document indicates when the document was last issued. BSI 2007ISBN 978 0 580 60132 3Amendments issued since publicationAmd. no. Date Text affectedPAS 121:2007Licensed Copy: Wang

3、Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSI BSI 2007 iPAS 121:2007ContentsForeword iii0 Introduction 11 Scope 22 Normative references 33 Terms and definitions 44 Product requirements 65 Performance requirements and classifications 186 Installation information 237

4、Maintenance information 238 Marking and labelling 24AnnexesAnnex A (informative) Building management 25Annex B (normative) General testing requirements 25Annex C (normative) Test method for reliability and response time of the product and the durability of materials 27Annex D (normative) Test method

5、 for the determination of the fire resistance performance of fire curtain barrier assemblies 28Annex E (informative) An engineered approach to using insulating zones 32Annex F (informative) Thermal limits Human factors 33Bibliography 34List of figuresFigure 1 Protection of side retention guide 7Figu

6、re 2 Overlapping and conjoining of active fire curtain barrier assemblies Typical example 20Figure D.1 Orientation of test specimen 29List of tablesTable 1 Overview of typical barrier test specification 8Table 2 Initiation of deployment 10Table 3 Applications, method of deployment and initiation 11T

7、able 4 Operation of barrier when in operational position 13Table 5 Warning systems 14Table 6 Number of cycles for testing reliability and durability 18Table A.1 Maintenance testing of active fire curtain barrier assemblies 25Summary of pagesThis document comprises a front cover, an inside front cove

8、r, pages i to iv, pages 1 to 35 and a back cover.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSIPAS 121:2007ii BSI 2007 This page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c)

9、 BSI BSI 2007 iiiPAS 121:2007ForewordPublishing informationThis Publicly Available Specification was published by BSI and came into effect on 31 August 2007.Acknowledgement is given to the following organizations that were involved in the development of this specification: Bodycote warringtonfire Ch

10、iltern International Fire City of Westminster Building Control International Fire Consultants Royal Borough of Kensington b) barriers remain retracted when the fire alarm system is activated and only deploy upon receipt of a signal from a local smoke/heat detector. In these circumstances, the only f

11、ire curtain barrier assemblies to deploy are those where fire or smoke are in the vicinity;c) barriers remain retracted when the fire alarm system is activated for a predetermined time to allow for evacuation before deploying fully;d) barriers move to given height above fixed floor level when the fi

12、re alarm system is activated and act as a smoke barrier for a predetermined time before closing fully for fire containment;e) barriers only deploy upon local detection of smoke or fire, independent of the fire alarm system such as a fusible link;f) barriers are required to remain retracted as part o

13、f a buildings smoke extraction design;g) barriers will deploy on loss of primary and auxiliary power supply.1 ScopeThis Publicly Available Specification gives requirements for design, specification, testing, installation, commissioning and maintenance of active fire curtain barrier assemblies.It is

14、applicable for use by active fire curtain barrier assemblies manufacturers, designers, specifiers, regulators and installers:a) in creating protected routes for the purpose of means of escape as an alternative to fire doors, non-load bearing walls, non-load bearing ceilings or fire shutters;b) in cr

15、eating fire separation horizontally, vertically or angled for compartmentation;c) as a method of upgrading non-fire resisting elements, e.g. in front of non-fire resisting glazing and doorsets, where required for compartmentation or protecting means of escape;d) in providing a smoke barrier in conju

16、nction with non-smoke rated doors/shutters and other products protecting openings to reduce leakage of smoke.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSI BSI 2007 3PAS 121:20072 Normative referencesThe following referenced documents are indispen

17、sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.BS 476-22, Fire tests on building materials and structures Part 22: Methods for determination of

18、the fire resistance of non-loadbearing elements of constructionBS 476-31.1, Fire tests on building materials and structures Part 31: Methods for measuring smoke penetration through doorsets and shutter assemblies Section 1: Method of measurement under ambient temperature conditionsBS 5839-1:2002, Fi

19、re detection and fire alarm systems for buildings Part 1: Code of practice for system design, installation, commissioning and maintenanceBS 7346-6, Components for smoke and heat control systems Part 6: Specifications for cable systemsBS 8434-2, Methods of test for assessment of the fire integrity of

20、 electric cables Part 2: Test for unprotected small cables for use in emergency circuits BS EN 50200 with 930 deg flame and with water sprayBS EN 949, Windows and curtain walling, doors, blinds and shutters Determination of the resistance to soft and heavy body impact for doorsBS EN 1363-1:1999, Fir

21、e resistance tests Part 1: General requirementsBS EN 1363-2, Fire resistance tests Part 2: Alternative and additional proceduresBS EN 1364-1, Fire resistance tests for non-loadbearing Part 1: WallsBS EN 1364-2, Fire resistance tests of non-loadbearing Part 2: CeilingsBS EN 1634-1, Fire resistance te

22、sts for door and shutter assemblies Part 1: Fire doors and shuttersBS EN 1634-3, Fire resistance tests for door and shutter assemblies Part 3: Smoke control doors and shuttersBS EN 12101-1, Smoke and heat control systems Part 1: Specification for smoke barriersBS EN 12101-9, Smoke and heat control s

23、ystems Part 9: Control panels 2)BS EN 12101-10, Smoke and heat control systems Part 10: Power suppliesBS EN 13501-2:2003, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services2)In preparation.Li

24、censed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSIPAS 121:20074 BSI 2007BS EN 14600:2005, Doorsets and openable windows with fire resisting and/or smoke control characteristics Requirements and classificationBS EN ISO 13943, Fire safety Vocabulary3 Term

25、s and definitionsFor the purposes of this Publicly Available Specification, the terms and definitions given in BS EN ISO 13943 and the following apply.3.1 active fire curtain barrier assemblyproduct that facilitates fire separation and moves from its retracted position into its fire operational posi

26、tion automatically when called upon to do so 3.2 active fire curtain barrier assembly with smoke ratingproduct that facilitates fire and smoke separation and moves from its retracted position into its fire operational position automatically when called upon to do so3.3 barrier movementtravel distanc

27、e of an active barrier from its retracted position to its fire operational position3.4 compartmentationprocess of separating a building or part of a building, into one or more rooms, spaces or storeys, with the intention of preventing the spread of fire to or from another part of the same building o

28、r adjoining buildingNOTE 1 Compartmentation is mainly employed to assist the emergency services by confining the fire within a fire resisting enclosure. In some instances it is employed to assist means of escape in buildings where evacuation may be delayed, for example, where phased evacuation polic

29、y has been applied in premises, such as hospitals and care homes, or where a policy of non-evacuation (e.g. “defend in place”) is employed as in certain designs of flat complexes.NOTE 2 Fire enclosures specifically for the purpose of means of escape, such as lobby protection to stairways and enclosu

30、re of special risks, are not regarded as compartments and normally have a lesser fire time and may employ passive smoke resistance measures.3.5 deploymentmovement of a barrier from its retracted position to its fire operational position3.6 fire operational positionposition of a fire curtain barrier

31、assembly which provides and sustains fire separation for a designated period3.7 fire separationmethod of providing an element that is intended for use in maintaining separation between two adjacent areas of a building in the event of a fire to form protected routes and/or compartmentation3.8 fitness

32、 for purposeability of a product, process or service to serve a defined purpose under specific conditionsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSI BSI 2007 5PAS 121:20073.9 gravity fail-safeproperty of a fire curtain barrier assembly to move

33、to its fire operational position in a controlled manner to facilitate fire separation when all consumable primary and auxiliary power supplies are removed, in the event of wiring or system corruption, or any combination thereof3.10 integrityability of a test specimen of a separating element of build

34、ing construction, when exposed to fire on one side, to prevent the passage through it of flames and hot gases and to prevent the occurrence of flames on the unexposed side3.11 insulationability of a test specimen of a separating element of building construction, when exposed to fire on one side, to

35、restrict the temperature rise of the unexposed face to below specified levels3.12 insulating zonearea created between the surface of the unexposed face of the separating element of building construction exposed to fire and the point at which the air temperature is 180 C above ambient air temperature

36、 at any given time classification3.13 life safety applicationapplication of the smoke and heat control system in its fire operational condition for the period of time required for the occupants of the premises to be alerted, and to be able to exit the premises, with the smoke and heat control system

37、 assisting in the protection of the means of escape and emergency services access3.14 multi-positional deploymentstaged movement of active fire curtain barrier assemblies to provide initial smoke containment prior to full fire containment3.15 radiation (total heat flux)heat energy transported as ele

38、ctro-magnetic radiation3.16 side retentionretention device of fire resisting material which holds the barrier to the building to contain fire3.17 smoke and heat control system arrangement of components installed in a building to limit the effects of smoke and heat from a fire3.18 smoke barrierdevice

39、 to channel, contain and/or prevent the migration of smoke (fire effluent)NOTE Smoke barriers may also be referred to as smoke curtains, smoke blinds or smoke screens.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSIPAS 121:20076 BSI 20074 Product re

40、quirementsNOTE The active fire curtain barrier assembly requirements are intended to provide the fire engineer and/or designer with an alternative to fire doors, shutters, walls and ceilings which fulfil the fire separation design requirements for life safety and property protection. Compliance with

41、 this specification does not necessarily, by itself, ensure fitness for purpose for an application, as defined in ISO/IEC Guide 2:1996.The building design parameters will dictate the minimum classification and performance of active fire curtain barrier assemblies that can be used in any particular a

42、pplication. The criteria for the correct choice of active fire curtain barrier assembly should take into account the total system, function and location requirements without hindering the means of escape or endangering the occupants. Applications are based on a full series of tests on the complete a

43、ssembly (including fire tests) as it is to be installed.4.1 Installation4.1.1 GeneralThe active fire curtain barrier assembly shall be installed such that its deployment is not obstructed. The inclusion of an additional zone to compensate for the deflection of the barrier due to fire pressure shall

44、be taken into account (see Annex A).NOTE Care should be taken to ensure that any adjacent surfaces which form part of the barrier to fire, e.g. false ceilings or fittings, have at least equivalent properties as the fire/smoke barrier, e.g. resistance to temperature and permeability.4.1.2 Side retent

45、ionSide retention shall be installed within the buildings structure unless measures are taken to protect the side retention from mechanical damage by using, for example bollards (see Figure 1).Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSI BSI 200

46、7 7PAS 121:2007Figure 1 Protection of side retention guidea) Side retention guides set into wallb) Side retention guides face fixed require protection to prevent distortion of guides by impactc) Side retention guides end fixed requires protection from both sidesKeyA Direction of fixingBWalC Side ret

47、ention guideD Fixing bracketEHead boxF Side protection, bollards or fixed protective frameworkEFCABAADBCCLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/12/2007 07:10, Uncontrolled Copy, (c) BSIPAS 121:20078 BSI 20074.2 Operation4.2.1 GeneralActive fire curtain barrier assemblies shall mov

48、e to the fire operational position in a safe and controlled manner (see 5.3, for response time and velocity) upon external initiation and according to their design type in Table 1.Active fire curtain barrier assemblies shall gravity fail-safe to their fire operational position in a controlled manner

49、 when all consumable primary and auxiliary power sources are removed, in the event of wiring or system corruption, or any combination thereof.NOTE Active gravity fail-safe fire curtain barrier assemblies do not need fire rated cables unless emergency retract is required.Table 1 Overview of typical barrier test specificationRequirement Means of escapeActive fire curtain barrier assembly forming part of protected route for means of escape purposesCompartmentationActiv