NFPA 288-2017 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance CRated Assemblies (Effective date 08 27 2016).pdf

《NFPA 288-2017 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance CRated Assemblies (Effective date 08 27 2016).pdf》由会员分享，可在线阅读，更多相关《NFPA 288-2017 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance CRated Assemblies (Effective date 08 27 2016).pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 NFPA 288 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire ResistanceRated Assemblies 2017IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommend

2、ed practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to a

3、chieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA St

4、andards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty o

5、r warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by an

6、y person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, t

7、o police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributab

8、le to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuanc

9、e of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through

10、the issuance of Tentative Interim Amendments or corrected by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.288-1 NFPA and National Fire Protect

11、ion Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 288 Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resis

12、tanceRated Assemblies 2017 Edition This edition of NFPA 288, Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire ResistanceRated Assemblies, was prepared by the Technical Committee on Fire Tests. It was issued by the Standards Council on August 7, 2016, wit

13、h an effective date of August 27, 2016, and supersedes all previous editions. This edition of NFPA 288 was approved as an American National Standard on August 27, 2016. Origin and Development of NFPA 288 This test procedure was developed in response to inquiries from outside sources to investigate a

14、nd establish a testing procedure for oor re doors. NFPA 80, Standard for Fire Doors and Other Opening Protectives, had a reference for horizontal access doors and required those assemblies to be tested in a horizontal position in accordance with the procedure described in NFPA 251, Standard Methods

15、of Tests of Fire Endurance of Building Construction and Materials (now withdrawn). NFPA 251 noted that the test standard did not provide for the effect on re endurance of conventional openings in the assembly unless specically provided for in the construction tested. This provision limited the testi

16、ng of the oor re door to the particular oor/ceiling or roof assembly used. Prior to this test method being developed, some testing laboratories provided testing and labeling of these products. There were many test protocols that had to be assumed, which created inconsistency in the testing procedure

17、s and listing requirements. This test procedure provides for consistency in the testing and listing of oor re doors. The test procedure has incorporated provisions from NFPA 251, Standard Methods of Tests of re Resistance of Building Construction and Materials (now withdrawn), and NFPA 252, Standard

18、 Methods of Fire Tests of Door Assemblies, where appropriate. The 2007 edition of NFPA 288 was a reconrmation of the 2001 edition. The 2012 edition expanded the documents scope to include horizontal assemblies, such as roofs. Requirements for thermocouple locations were also revised. The revisions i

19、n the 2017 edition are limited to reference updates.FIRE TESTS OF HORIZONTAL FIRE DOOR ASSEMBLIES INSTALLED IN HORIZONTAL FIRE RESISTANCERATED ASSEMBLIES 288-2 2017 Edition Technical Committee on Fire Tests Barry L. Badders, Jr., Chair Intertek Testing Services, TX RT Scott W. Adams, Park City Fire

20、Service District, UT E Rep. International Fire Marshals Association Farid Alfawakhiri, American Iron and Steel Institute, IL M James A. Burns, New York State Department, NY E Rep. Firemens Association of the State of New York Benjamin H. Caldwell, Skidmore, Owings & Merrill LLP, NY SE Marcos Chaos,

21、FM Global, MA I Gordon H. Damant, Inter-City Testing & Consulting Corp. of California, CA SE Rick D. Davis, National Institute of Standards & Technology, MD RT Scott E. Dillon, Crane Engineering, MN SE William E. Fitch, P, FL SE Richard G. Gann, Gaithersburg, MD SE Marcelo M. Hirschler, GBH Internat

22、ional, CA SE Paul A. Hough, Armstrong World Industries, Inc., PA M William E. Koffel, Koffel Associates, Inc., MD SE Sergei V. Levchik, Israel Chemicals Ltd. (ICL-IP), NY M Rep. ACC-North American Flame Retardant Alliance Richard T. Long, Jr., Exponent, Inc., MD M Rep. Upholstered Furniture Action C

23、ouncil James Andrew Lynch, Amped I Research & Development, PA SE John Martell, Professional Fire Fighters of Maine/IAFF, ME L Rep. International Association of Fire Fighters Rodney A. McPhee, Canadian Wood Council, Canada M Kathleen A. Newman, Firetect, CA M Arthur J. Parker, JENSEN HUGHES, MD SE Ji

24、llian Roberts, Alaska Fire Marshals Ofce, AK E Kenneth Roberts, ICC Evaluation Services, AL U Michael L. Savage, Sr., City of Rio Rancho, NM E David T. Sheppard, U.S. Bureau of Alcohol, Tobacco, Firearms & Explosives, MD RT Dwayne E. Sloan, UL LLC, NC RT Stanislav I. Stoliarov, University of Marylan

25、d, MD SE Kuma Sumathipala, American Wood Council, VA M Alternates Erik H. Anderson, Koffel Associates, Inc., MD SE (Alt. to William E. Koffel) Jesse J. Beitel, JENSEN HUGHES, MD SE (Alt. to Arthur J. Parker) Richard J. Davis, FM Global, MA I (Alt. to Marcos Chaos) Timothy Earl, GBH International, MI

26、 SE (Alt. to Marcelo M. Hirschler) Sam W. Francis, American Wood Council, PA M (Alt. to Kuma Sumathipala) Matthew Freeborn, Intertek Testing Services, PA RT (Alt. to Barry L. Badders, Jr.) Stephen Paul Fuss, U.S. Bureau of Alcohol, Tobacco, Firearms & Explosives, MD RT (Alt. to David T. Sheppard) Ju

27、stin A. Geiman, Fire and Risk Alliance LLC, MD SE (Alt. to James Andrew Lynch) Marc L. Janssens, Southwest Research Institute, TX RT (Voting Alt.) Randall K. Laymon, UL LLC, IL RT (Alt. to Dwayne E. Sloan) Michael Schmeida, Gypsum Association, OH M (Voting Alt.) Ineke Van Zeeland, Canadian Wood Coun

28、cil, Canada M (Alt. to Rodney A. McPhee) Matthew T. Vinci, International Association of Fire Fighters, DC L (Alt. to John Martell) Robert J. Wills, American Iron and Steel Institute, AL M (Alt. to Farid Alfawakhiri) Joe Ziolkowski, American Furniture Manufacturers Association, NC M (Alt. to Richard

29、T. Long, Jr.) Nonvoting Robert H. Barker, American Fiber Manufacturers Association, VA M Rep. American Fiber Manufacturers Association Rohit Khanna, U.S. Consumer Product Safety Commission, MD C Rep. U.S. Consumer Product Safety Commission Andrew Lock, U.S. Consumer Product Safety Commission, MD C R

30、ep. U.S. Consumer Product Safety Commission Tracy L. Vecchiarelli, NFPA Staff LiaisonCOMMITTEE PERSONNEL 288-3 2017 Edition This list represents the membership at the time the Committee was balloted on the nal text of this edition. Since that time, changes in the membership may have occurred. A key

31、to classications is found at the back of the document. NOTE: Membership on a committee shall not in and of itself constitute an endorsement of the Association or any document developed by the committee on which the member serves. Committee Scope: This Committee shall have primary responsibility for

32、documents on re testing procedures, for reviewing existing re test standards and recommending appropriate action to NFPA, for recommending the application of and advising on the interpretation of acceptable test standards for re problems of concern to NFPA technical committees and members, and for acting in a liaison capacity between NFPA and the committees of other organizations writing re test standards. This Committee does not cover re tests that are used to evaluate extinguishing agents, devices, or systems.