欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享

耐高温性能聚合物材料

ewordThis British Standard is the UK implementation of ISO 30021:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/

耐高温性能聚合物材料Tag内容描述:

1、ewordThis British Standard is the UK implementation of ISO 30021:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/26, Burning behaviour of plastics and rubbers.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI Standa。

2、r immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers measurement of the rheologicalproperties of polymeric materials at various temperatures andshear rates common to processing equipment. It covers mea-surement of melt vi。

3、ton utilisant des polymres renforcs de fibres (PRF) INTERNATIONAL STANDARD ISO 14484 First edition 2013-04-01 Reference number ISO 14484:2013(E) ISO 14484:2013(E)ii ISO 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, w。

4、y following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method determines the flexural stiffness andstrength properties of polymer matrix composites.1.1.1 Procedure AA three-point loading system utilizingcenter loading on a simply supported beam.1.1。

5、 following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This test method determines the in-plane tensile prop-erties of polymer matrix composite materials reinforced byhigh-mo。

6、 following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This test method determines the in-plane tensile prop-erties of polymer matrix composite materials reinforced byhigh-mo。

7、ately following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method determines the flexural stiffness andstrength properties of polymer matrix composites.1.1.1 Procedure AA three-point loading system utilizingcenter loading on a simply supported beam.1.1.。

8、1984 04 03 Released CA01-DR524140 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 GREASE, LITHIUM COMPLEX - POLYMER ADDITIVE - WSB-M1C208-A1 HIGH TEMPERATURE - NLGI #1 GREASE, LITHIUM COMPLEX - POLYMER ADDITIVE WSB-M1C208-A2 HIGH TEMPERATURE, NLGI #2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are high temperature lubricants containing lithium complex soap and mineral oil, modified with a polymer agent 。

【耐高温性能聚合物材料】相关PDF文档
GB T 36374.2-2018 塑料 砜聚合物模塑和挤出材料 第2部分:试样制备和性能测定.pdf
GB T 35465.3-2017 聚合物基复合材料疲劳性能测试方法 第3部分:拉-拉疲劳.pdf
GB T 35465.1-2017 聚合物基复合材料疲劳性能测试方法 第1部分:通则.pdf
GB T 30970-2014 聚合物基复合材料剪切性能V型缺口梁试验方法.pdf
GB T 3354-2014 定向纤维增强聚合物基复合材料拉伸性能试验方法.pdf
GB T 3356-2014 定向纤维增强聚合物基复合材料弯曲性能试验方法.pdf
HB 7618-1998 聚合物基复合材料力学性能数据表达准则.pdf
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1 

收起
展开