管式膜的加工标准

1、mber immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year 。

2、er the fixed designation F2934; the number immediately following the designation indicates the year oforiginal adoption 。

3、nation F2994; the number immediately following the designation indicates the year oforiginal adoption or, in the case of。

4、 standard is issued under the fixed designation F1760; the number immediately following the designation indicates the ye。

5、mber immediately following the designation indicates the year of originaladoption or, in the case of revision, the year 。

6、ately following the designation indicates the yearof original adoption or, in the case of revision, the year of last rev。

7、r immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of 。

8、y following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revisio。

9、ely following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revis。

10、 immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of l。

11、mmediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of las。

12、r immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of 。

13、designation indicates the yearof original adoption or, in the case of revision, the year of last revision. A number in p。

14、 immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of l。

15、lowing the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A 。

16、894; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision。

17、4; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, 。

18、ransmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prio。

19、本标准规定了标准体积管的使用条件使用前的准备工作试运行检定容积式流量计的基本要求.本标准适用于用标准体棋管检定以液体为计量介质的容职式流量计.本标准不适用于从阔外引进的小睿积式标准体积管.2 引用梅准GB 1884.1885 石油产品带度恻。