,PECIFICATION ALUMINUM ALLOY ROD AND WIRE; FOR RIVETS AND COLD HEADING This amendment has been approved by the Assistant Administrator, Office of Fede
的QQ号Tag内容描述：
1、PECIFICATION ALUMINUM ALLOY ROD AND WIRE; FOR RIVETS AND COLD HEADING This amendment has been approved by the Assistant Administrator, Office of Federal Supply and Services, General Services Administration. Page 1 Paragraph 1.2.1 ADD: “2017-Hl5, H25“ Page 5 Table II ADD: .(under “Alloy and Temper“) - “2017-H15, -H25“ (under “Diameter - inches“) - Up thru 1 .OOO“ (under “Tensile Strength, ksi-minimum“) - 35.0“ (under “Tensile Strength, ksi-maximum“) - “45.0“ CIVIL AGENCY COORD。
2、 by the Commissioner, Federal Supply Service General Service Administration for the use of all Federal agencies. I. SCOPE AND CLASSIFICATION 1.1 Scope. Aluminum alloy wire and rod covered by this specification are suitable for the manufacturer of rivets and other utility items by cold die-heading operations 1.2 Classification. 1.2.1 Alloys and tempers. Wire and rod shall be following alloys and tempers, as specified (see-6.1) tempers shall be as specified in ANSI H35.1: 1100-0, H14, H24 2219-0, 。
3、ment of the Navy, SEA 05Q, - 2531 Jefferson Davis Hwy, Arlington, VA 22242-5160. QQ-N-286G 07 December 2000 SUPERSEDING QQ-N-00286F(SH) 29 November 1990 QQ-N-286E 02 August 1985 FEDERAL SPECIFICATION NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) The General Services Administration has authorized the use of this federal specification by all federal agencies. 1. SCOPE AND CLASSIFICATION 1.1 Scope. This specification covers all nickel-copper-aluminum alloy wrought forms formerly classified as 。
