欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享

玻璃容器螺纹

,92本标准等同采用国际标准ISO 9058:1992玻璃容器公差。本标准仅做编辑性修改,技术内容完全相同。玻璃容器规格尺寸的各项公差是一项重要的技术指标,是我国玻璃加工技术水平的标志。本标准是玻璃容器的基础标准,通过本标准的实施将使我国玻璃容器生产进一步系列化、规范化。本标准由中国轻工业联合会提出

玻璃容器螺纹Tag内容描述:

1、92本标准等同采用国际标准ISO 9058:1992玻璃容器公差。
本标准仅做编辑性修改,技术内容完全相同。
玻璃容器规格尺寸的各项公差是一项重要的技术指标,是我国玻璃加工技术水平的标志。
本标准是玻璃容器的基础标准,通过本标准的实施将使我国玻璃容器生产进一步系列化、规范化。
本标准由中国轻工业联合会提出。
本标准由全国玻璃仪器标准化技术委员会归口。
本标准起草单位:国家轻工业玻璃产品质量监督检测中心、山东省药用玻璃股份有限公司。
本标准主要起草人:崔久全、贺瑞玲、李道国、杜玉海、袁守菊。
本标准首次发布。
1范围玻璃容器公差GBT 21299-2007IS0 9058:1992本标准规定了横截面为圆形、公称容量为50 mL5 000 mI。
的各类玻璃容器的公差。
本标准适用于盛装食品、酒、饮料、药品、农药等的各种玻璃容器。
2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。
凡是注日期的用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适应于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。
凡是不注日期的引用文件,其最新版本适用于本标准。
G。

2、British Standard, having been prepared under the direction of the Packaging and Freight Containers Standards Committee, was published under the authority of the Executive Board on 31 March 1978 BSI 07-1999 First published January 1953 First revision March 1978 The following BSI references relate to the work on this standard: Committee reference PKM/563 Draft for comment 74/62682 DC ISBN 0 580 10110 X Cooperating organizations The Packaging and Freight Containers Standards Committee, under。

3、Glasbehltnisse - Gewindemae Supersedes December 1979 edition. In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Foreword This standard has been prepared by the Normenausschu Verpackungswesen (Packaging Standards Com- mittee), Technical Committee Verpackungen aus Glas. Amendments In comparison with the December 1979 edition, the scope of the standard has bee。

4、bkappe Mae Sgengewinde DIN 55 525 a a a -n Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions Mae in mm 1 Anwendungsbereich und Zweck Die in dieser Norm festgelegten Sgengewinde gelten fr Schraubverschlsse, die vorzugsweise bei Flaschen 1) aus Glas (GS) und Kunststoff (KS) als Bolzengewinde und Muttergewinde (S) zur Anwendung kommen (siehe auch Erluterungen). 2 Mae, Bezeichnung Mutter S D Bolzen 。

【玻璃容器螺纹】相关PDF文档
HG T 2036-2005 搪玻璃容器参数.pdf
HG T 3126-1998 搪玻璃蒸馏容器.pdf
GB 4771-1984 药用玻璃及其玻璃容器碱溶出量试验方法.pdf
BB 0029-2004 包装玻璃容器 公差.pdf
GB T 21299-2007 玻璃容器 公差.pdf
SJ 20029-1992 玻璃介质微调电容器用玻璃规范.pdf
SIS 84 50 01-1970 GL screw threads for glass containers《玻璃容器的GL螺纹》.pdf
STAS 1976-1981 EXTERN AL SCREW THREAD FOR GLASS CONTAINERS《玻璃容器的外部螺纹》.pdf
ICONTEC 1922-1984 《玻璃包装用品,带螺纹以及安全绶带的玻璃包装容器》.pdf
GB T 17449-1998 包装 玻璃容器 螺纹瓶口尺寸.pdf
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1 

收起
展开