NEMA NTCIP 2201-2003 National Transportation Communications for ITS Protocol - Transportation Transport Profile (V01 15)《国家运输ITS通信协议 交通运输设置文件(版本01 15)》.pdf

《NEMA NTCIP 2201-2003 National Transportation Communications for ITS Protocol - Transportation Transport Profile (V01 15)《国家运输ITS通信协议 交通运输设置文件(版本01 15)》.pdf》由会员分享，可在线阅读，更多相关《NEMA NTCIP 2201-2003 National Transportation Communications for ITS Protocol - Transportation Transport Profile (V01 15)《国家运输ITS通信协议 交通运输设置文件(版本01 15)》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 2201:2003 v01.15National TransportationCommunications for ITS ProtocolTra

2、nsportation Transport ProfileA Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 2201:2003 v01.15 National Transportation Communications for ITS Protocol Transportation Transport Profile September 2005 Published by American Association of State Highway and Transp

3、ortation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE) 1099 14thStreet, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Manufacturers Association (NEMA) 1300 North 17th Street, Suite 1752 Rosslyn,

4、Virginia 22209-3806 g148 2005 AASHTO / ITE / NEMA. All rights reserved. Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA NOTICES Copyright Notice g148 2005 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (IT

5、E), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the Berne Convention

6、, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to these material

7、s. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Portable Docum

8、ent Format (PDF) electronic data file (the “PDF File”), AASHTO / ITE / NEMA authorizes each registered PDF File user to view, download, copy, or print the PDF File available from the authorized Web site, subject to the terms and conditions of this license agreement: (a) you may download one copy of

9、each PDF File for personal, noncommercial, and intraorganizational use only; (b) ownership of the PDF File is not transferred to you; you are licensed to use the PDF File; (c) you may make one more electronic copy of the PDF File, such as to a second hard drive or burn to a CD; (d) you agree not to

10、copy, distribute, or transfer the PDF File from that media to any other electronic media or device; (e) you may print one paper copy of the PDF File; (f) you may make one paper reproduction of the printed copy; (g) any permitted copies of the PDF File must retain the copyright notice, and any other

11、proprietary notices contained in the file; (h) the PDF File license does not include (1) resale of the PDF File or copies, (2) republishing the content in compendiums or anthologies, (3) publishing excerpts in commercial publications or works for hire, (4) editing or modification of the PDF File exc

12、ept those portions as permitted, (5) posting on network servers or distribution by electronic mail or from electronic storage devices, and (6) translation to other languages or conversion to other electronic formats; (i) other use of the PDF File and printed copy requires express, prior written cons

13、ent. Data Dictionary and MIB Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Data Dictionary (“DD”) or Management Information Base (“MIB”), AASHTO / ITE / NEMA extend the following permission: You may make and/or distribute unlimited

14、 copies, including derivative works, of the DD or MIB, including copies for commercial distribution, provided that: (i) each copy you make and/or distribute contains the citation “Derived from NTCIP 0000 insert the document number. Used by permission of AASHTO / ITE / NEMA.”; (ii) the copies or deri

15、vative works are not made part of the standards publications or works offered by other standards developing organizations or publishers or as works-for-hire not associated with commercial hardware or software products intended for field implementation; 2005 AASHTO / ITE / NEMA Do Not Copy Without Wr

16、itten Permission (iii) use of the DD or MIB is restricted in that the syntax fields may be modified only to reflect a more restrictive subrange or enumerated values; (iv) the description field may be modified but only to the extent that: (a) only those bit values or enumerated values that are suppor

17、ted are listed; and (b) the more restrictive subrange is expressed. These materials are delivered “AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA and their suppliers do not warrant the performance or results you may obtain by using these materials. AASHTO / ITE / N

18、EMA and their suppliers make no warranties, express or implied, as to noninfringement of third party rights, merchantability, or fitness for any particular purpose. In no event will AASHTO / ITE / NEMA or their suppliers be liable to you or any third party for any claim or for any consequential, inc

19、idental or special damages, including any lost profits or lost savings, arising from your reproduction or use of these materials, even if an AASHTO / ITE / NEMA representative has been advised of the possibility of such damages. Some states or jurisdictions do not allow the exclusion or limitation o

20、f incidental, consequential or special damages, or the exclusion of implied warranties, so the above limitations may not apply to you. Use of these materials does not constitute an endorsement or affiliation by or between AASHTO, ITE, or NEMA and you, your company, or your products and services. If

21、you are unwilling to accept the foregoing restrictions, you should immediately return these materials. PRL and RTM Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“PRL”) or a Requirements Traceability Matri

22、x (“RTM”), AASHTO / ITE / NEMA extend the following permission: (i) you may make and/or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implementation Conformance Statement (“PICS”) or the RTM, provided that each copy you make and/or distribute contains th

23、e citation “Based on NTCIP 0000 insert the document number PRL or RTM. Used by permission. Original text (C) AASHTO / ITE / NEMA.”; (ii) you may not modify the PRL or the RTM except for the Project Requirements column, which is the only column that may be modified to show a products implementation o

24、r the project-specific requirements; and (iii) if the PRL or RTM excerpt is made from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft document containing preliminary information that is subject to change.” This limited permission does not include reuse in works offered

25、by other standards developing organizations or publishers, and does not include reuse in works-for-hire, compendiums, or electronic storage devices that are not associated with commercial hardware or software products intended for field installation. A PICS is a Profile Requirements List which is co

26、mpleted to indicate the features that are supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. Content and Liability Disclaimer The information in this publication was considered technically sound by the consensus of persons engaged in

27、 the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA AASHTO, ITE, and NEM

28、A standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publicatio

29、n. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments cont

30、ained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, applic

31、ation, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particu

32、lar purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render profess

33、ional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a compete

34、nt professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publicat

35、ion. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compli

36、ance with any health or safetyrelated information in this document shall not be attributable to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other marks mentioned in this document a

37、re the trademarks of their respective owners. NTCIP 2201:2003 v01.15 Page i g164 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permission ACKNOWLEDGEMENTS This publication was prepared by the NTCIP Profiles Working Group, and was reviewed and recommended by the Joint Committee on the NTCIP. T

38、he Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP c

39、onsists of six representatives from each of the standards organizations, and provides guidance for NTCIP development. At the time that this document was prepared, the following individuals were members of the NTCIP Profiles Working Group: g120g3 Jas Bhullar g120g3 Doug Crawford g120g3 Robert De Roch

40、e (Chair) g120g3 Robert Force g120g3 Willard “Bud“ Kent g120g3 Paul Lim-Hing g120g3 Bob Martindale g120g3 Amit Misra g120g3 Alex Mousadi g120g3 Kenneth Vaughn Other individuals providing input to the document include: g120g3 Joey Baumgartner g120g3 Albert Bonificio g120g3 Blake Christie g120g3 Arthu

41、r Felgate g120g3 Michael Forbis g120g3 Joseph Herr g120g3 Earl Hoekman g120g3 David Kingery g120g3 Al Kosik g120g3 Doug Lowe g120g3 Gary Meredith g120g3 Don Ninke g120g3 Brian Paulsmeyer g120g3 Jeff Racz g120g3 Michael Robinson g120g3 James Rose g120g3 Joerg “Nu“ Rosenbohm g120g3 Bancroft Scott g120

42、g3 Bo Strickland g120g3 Sonja Sun g120g3 Paul Thorpe g120g3 Keith Vennel g120g3 Hoi Wong NTCIP 2201:2003 v01.15 Page ii Do Not Copy Without Written Permission g164 2005 AASHTO / ITE / NEMA In addition to the many volunteer efforts, recognition is also given to those organizations who supported the e

43、fforts of the working groups by providing comments and funding for the standard, including: g120g3 ARINC g120g3 Caltrans g120g3 Eagle Traffic Control Systems g120g3 Econolite Control Products g120g3 Federal Highway Administration g120g3 Iteris g120g3 JPL g120g3 Mastec g120g3 Ministry of Transportati

44、on, Ontario g120g3 Minnesota Department of Transportation g120g3 Mitretek g120g3 Naztec g120g3 PB Farradyne, a Division of PBQD g120g3 Peek Traffic g120g3 Skyline Products g120g3 Southwest Research Institute g120g3 Trevilon g120g3 VHB g120g3 Virginia Department of TransportationNTCIP 2201:2003 v01.1

45、5 Page iii g164 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permission FOREWORD This document uses only metric units. The context of the NTCIP is one part of the Intelligent Transportation Systems standardization activities covering base standards, profiles, and registration mechanisms. g12

46、0g3 Base Standards define procedures and rules for providing the fundamental operations associated with communications and information that is exchanged over communications links. g120g3 Profiles define subsets or combinations of base standards used to provide specific functions or services. Profile

47、s prescribe particular subsets or options available in base standards necessary for accomplishing a particular function or service. This provides a basis for the development of uniform, nationally recognized conformance. g120g3 Registration Mechanisms provide a means to specify and uniquely identify

48、 detailed parameters within the framework of base standards and/or profiles. This publication provides the definition of an NTCIP Transport Profile. It defines requirements for the transport and network layers of a communications stack based upon the ISO-OSI Reference Model. It also contains optiona

49、l and conditional clauses that are applicable to specific environments for which they are intended. For more information about NTCIP standards, visit the NTCIP Web site at http:/www.ntcip.org. User Comment Instructions The term “User Comment” includes any type of written inquiry, comment, question, or proposed revision, from an individual person or organization, about any part of this standard publications content. A “Request for Interpretation” of this standard publication is also classified as a User Comment. User Comments are solicited at any time. In preparation of this