NEMA HP 100 2-1991 High Temperature Instrumentation and Control Cables Insulated and Jacketed with ETFE Fluoropolymers《用PEP氟碳化合物绝缘并包套的高温测试设备及控制电缆》.pdf

《NEMA HP 100 2-1991 High Temperature Instrumentation and Control Cables Insulated and Jacketed with ETFE Fluoropolymers《用PEP氟碳化合物绝缘并包套的高温测试设备及控制电缆》.pdf》由会员分享，可在线阅读，更多相关《NEMA HP 100 2-1991 High Temperature Instrumentation and Control Cables Insulated and Jacketed with ETFE Fluoropolymers《用PEP氟碳化合物绝缘并包套的高温测试设备及控制电缆》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationNEMA HP 100.2-1991 (R2010)High Temperature Instrumentation and Control Cables Insulated and Jacketed with ETFE FluoropolymersNEMA Standards Publication HP 100.2-1991 (R2005, R2010) High Temperature Instrumentation and Control Cab

2、les Insulated and Jacketed with ETFE Fluoropolymers Reaffirmed September 10, 2010 Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209 www.nema.org Copyright 2010 by the National Electrical Manufacturers Association. All rights includ

3、ing translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. NOTICE AND DISCLAIMERThe information in this publication was considered techn

4、ically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document.The National Electrical Manufactur

5、ers Association (NEMA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic cover

6、ed by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgmen

7、ts contained in its standards and guideline publications.NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or re

8、liance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA

9、 does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide.In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or ent

10、ity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given cir

11、cumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication.NEMA has no power, nor does it undertake to police or enforce compliance wi

12、th the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solel

13、y the responsibility of the certifier or maker of the statement.NEVA HP*:100.2 91 6470247 0503997 3T7 A 1 TABLE OF CONTENTS FOREWORD i SCOPE ii Section 1 REFERENCED STANDARDS AND GENERAL INFORMATION 1 Referenced Standards 1 General Information 1 Section 2 REQUIREMENTS . 3 Introduction . 3 Conductors

14、 3 Temperature Rating . 3 Insulation . 3 Circuit Identification 7 Assembly . 7 Jackets 7 Test Procedures . 7 Tables Table 2-1 PRIMARY INSULATION THICKNESS 4 Table 2-2 INSULATION AND JACKET MATERIAL . 5 Table 2-3 OVERALL JACKET THICKNESS 7 NENA HP*L00*2 91 b470247 0503978 233 Foreword This Standards

15、Publication for High Temperature Instrumentation and Control Cables Insu- lated and Jacketed with ETFE Fluoropolymers was developed by the High Performance Wire and Cable Section (formerlyknown as the High Temperature Insulated Wire and Cable Section) of the National Electrical Manufacturers Associa

16、tion. NationalElectricai Manufacturers Association standardsare adopted in the public interest and designed to eliminate misunderstanding between the manufacturer and the user and to assist the user in selecting and obtaining the proper product for his particular need. Existence of a National Electr

17、ical Manufacturers Association Standard does not in anyrespect preclude the manufacture or use of products not conforming to the standard. Suggestions for imprownents gained in the use of this standard wibe welcomed. They should be sent to: Vice President, Engineering National Electrical Manufacture

18、rs Association 2101 L Street, N.W., Suite 300 Washington, DC 20037-1526 i NEMA HPa;L00-2 91 = 6470247 0503999 L7T Scope This Standards Publication cows specific requirements for multiple-conductor instrumenta- tion and control cables insulated and jacketed with ETFE fluoropolymers. It supplements th

19、e general requirements and testingprocedures contained in NEMA StandardsPublication HP 100. NENA HP*L00.2 91 6470247 0504000 59T HP 100.2-1 991 Page 1 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROCARBONS Section 1 REFERENCED STANDARDS AND GENERAL INFORMA

20、TION 1.1 REFERENCED STANDARDS American Society for Testing ; 0.5 1 NENA HP%kL00*2 71 6470247 0504005 O71 W HP 100.2-1991 Page 6 Table 2-3 Overall Jacket Thickness Calculated Diameter of Cable Under Jacket Jacket Thickness Normal Duty Inches mm Mils mm O. 150 or less 3.82 or less 10 0.25 O. 15 1-0.25

21、0 3.83-6.36 12 0.3 1 0.25 1-0.425 6.37-10.80 15 0.38 0.426-0.700 10.81- 17.77 20 0.5 1 0.70 1 - 1 .o00 17.78-25.40 25 0.64 1.001 -1.500 25.4 1-38.10 30 0.76 Heavy Duty Mils mm 15 0.38 20 0.5 1 25 0.63 30 0.76 45 1.14 50 1.27 NEMA HP*l100*2 91 D 6470247 050400b TO8 NEMA STANDARDIZATION BACKGROUND The

22、 pupse of NEMA Sundards, thcir classification, and status are set fonh in ccririin clauscs of tIx SEhI.4 Standardization Policies and Procedures manual and arc referenced bclow: Purpose of Standards National Electrical Manufacturers Association Standards are adopted in the public interest and are dc

23、signcd KI eliminate misunderstandings bctween the manufacturer and the purchaser and to assist ihe purchaser in selecting and obtaining thc proper product for their particular needs. Existence of a National Elecuical Manufacturers Association Standard does not in any respect preclude any member or n

24、onmember from manufacturing or selling products not conforming to the standard. (Standardization Policies and Procedures, p. I) Definition of a Standard . A Standard of the National Elecmcal Manufacturers Association defines a product, process or procedure with reference to one or more of the follow

25、ing: nomenclature, composition, dimensions, tolerances, safety, operating characteristics, performance, rating, testing, and the service for which they are designed. (Standardization Policies and Procedures, p. 2) Dimensions Where dimensions are given for interchangeability purposes, alternate dimen

26、sions satisfying the other provisions of the Standards Publication may be capable of otherwise equivalent performance. (Standardization Policies and Procedures, p. 8) Categories of Standards National Elecmcal Manufacturers Association Standards are of three classes, which have received the affinnati

27、ve vote 1. NEMA Standard, which relates to a product, process, or procedure commercially standardized and subject to repetitive 2. Suggested Standard for Future Design, which may not have been regularly applied to a commercial product, but which 3. Adoptive Standard, which is adopted in whole or in

28、part from the standards of another organization, either domestic, of at least two-thirds of the Subdivision VORS cast in the affirmative or negative: manufacture. suggests a sound engineering approach to future development. regional, or international. (Sandardizarion Policies and Procedures, pp. 7 d

29、i 16) Authorized Engineering Information Authorized Engineering Information consists of explanatory data and other engineering information of an informative character not failing within the classification of NEMA Standard or Suggesied Standard for Future Design, which standard has received the affin

30、native vote of at least wo-thirds of the Subdivision votes cast in the flirrnative or negative. (Standardizatwn Policies and Procedures, pp. 7 & 16) Identification of Status Standards in NEMA Standards Publications are identified as “NEMA Standard,” “Suggested Standard for Future Design,” or “Adopti

31、ve Standard.” These indicate the status of the standard. A statement incorporating the auxiliary verb “sha” indicates that compliance with a requirement is mandatory for compliance with the standard. These classes of standards are identified in the foreword or throughout the text The material identi

32、ii as “Authorized Engineering Information” is designated similarly. Sratements inmrporating other auxiliary verbs such as “should,” “may,” etc. refer to authorized engineering information and not to pmedures required for compliance with the standard. NEMA HP*LM0.2 91 611702117 0504007 944 HIGH PERFO

33、RMANCE WIRE AND CABLE SECTION OF THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION MEMBER COMPANIES American Eiecaic Cable Company Holydre, MA O1040 Asm Industries, Inc. Dayton,OH 45432 AT&T Nmmss,GA 30071 Barcel Wire and Cable Corporation Irvine, CA 92714-5885 Belden Divisid Cooper Indushies Inc. R

34、ichmond, IN 47375 Berk-Tek, Inc. New Holland, PA 17557 Brand-Rex Company Willimantic, CT 06226 Cable USA, Inc. Naples, FL 33942 Cablec Continental Cables Company York, PA 17402-9950 Carol Cable Company, Inc. Pawtucket, RI 02862 Champlain Cable Corporation Winooski,VT 05404 Delta Suprenant Wire and C

35、able Clinton,MA 01510 Furon Company Aurm,OH 44202 Harbour Industries, Inc. Shelburne,VT 05482 Independent Cable, Inc. Hudson,MA 01749 -Tech Wire Company, Inc. Rome,NY 13440 Micro-Tek Corporation Cinnamhson, NJ 08077-2134 Mohawk Wire & Cable Corporation Leominster, MA 01453 Montrose Roducts Company A

36、uburn,MA 01501 NEK Cable, Inc. Bohemia, NY 11716 The Okonite Company Ramsey, NJ 07446 Pacific Electricord Company Garena,CA 90247 Philadelphia Insulated Wire Company Moorestown,NJ 08057 Prestolite Wire Corporation Farmington Hills, Mi 48018 Quirk Wire Company, inc. West Brookfeld, MA 01585 Radix Wir

37、e Company Euclid, OH 44132 The Rockbestos Company New Haven, CT 06504 Siecor Corporation Hickory, NC 28603-0189 Specialty Cable Corp. Wailingford, C 06492 Teledyne niermatics Elm City, NC 27822 Tensolite Company St. Augustine, FL 32092 Times Microwave Systems, Inc. Waliingford, C 06492 Triangle Wire and Cable, Inc. New Brunswick, NJ 08903 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB