NEMA C78 370-1997 Electric Lamps - Method of Designation for Electric Lamps - Photographic Stage and Studio (First Edition Includes 2002 Supplement to ANSI C78 370-1997 )《电灯 摄影场和摄影.pdf

《NEMA C78 370-1997 Electric Lamps - Method of Designation for Electric Lamps - Photographic Stage and Studio (First Edition Includes 2002 Supplement to ANSI C78 370-1997 )《电灯 摄影场和摄影.pdf》由会员分享，可在线阅读，更多相关《NEMA C78 370-1997 Electric Lamps - Method of Designation for Electric Lamps - Photographic Stage and Studio (First Edition Includes 2002 Supplement to ANSI C78 370-1997 )《电灯 摄影场和摄影.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI C78.370-1997 (R2003) American National Standard Method of Designation for Electric Lamps- Photographic, Stage, and Studio Secretariat: National Electrical Manufacturers Association Approved as an American National Standards Institute, Inc. NOTICE AND DISCLAIMER The information in this publicati

2、on was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. The Nation

3、al Electrical Manufacturers Association (NEMA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an int

4、erest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the

5、soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, u

6、se of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particu

7、lar purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on

8、 behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reas

9、onable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to po

10、lice or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safety-related information in this document shall not be att

11、ributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C78.370-3901cd-2002 Supplement to ANSI C78.370-1997 and ANSI C78.390-1998 I American National Standard I Approved December 31, 2002 Secretariat: ANSLG - National Electrical Manufacturers Association I

12、 ANS for Electric Lamps - Amendments to ANSI C78.370-I997 and ANSI C78.390-I 998 TITLE PAGE AND INSTRUCTIONS: Because these amendments supplement ANSI C78.370-1997 (Photographic, Stage and Studio) and ANSI C78.390-1998 (Miniature and Sealed-Beam Incandescent Lamps) we suggest that you place a copy a

13、long with these cited standards. Supplement pages Rep1 aces Criteria for Reinstatement of De-listed Codes Reso lu tio n Procedu re ANSI C78.370-1997 7 6.7 ANSI C78.390-1998 7 7.7 ANSI C78.370-1997 7 6.6 ANSI C78.390-1998 7 7.6 Whether supplements are inserted into the mother document in lamp abbrevi

14、ation code number or kept separate as issued, it is entirely at the discretion of the purchaser. Copyright O 2002 by American National Standard Lighting Group - NEMA 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 ANSI C78.370-3901cd-2002 Supplement to ANSI C78.370-1997 and ANSI C78.390-1998 E

15、LECTRIC LAMP, METHOD OF DESIGNATION Amendments to ANSI C78.370-1997 7 6.7 ANSI C78.390-1998 7 7.7 Criteria for Reinstatement of De-listed Codes Should the LCD program administrator be notified in writing that a LCD (lamp code designation) number is no longer listed in the appropriate Special Report

16、(SR)(as an example but not limited to SR25 and 26) the Administrator shall follow paragraph 7.3 and 7.4 of this standard. At the discretion of the Administrator, a service fee will be accessed. Upon receipt of a completed request, the Administrator shall publicize for a 60 day period. If no objectio

17、ns are received by the Administrator within 60 days after publicizing the request, the file shall be updated accordingly and the Administrator shall notify the participants that the reinstatement of a delisted LCD has been made. The Administrator provides a listing service in the form of publishing

18、LCDs in a SR (Special Report) for public knowledge and for the developing of new or revised industry standards. Copyright O 2002 by American National Standard Lighting Group - NEMA 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 ANSI C78.370-3901cd-2002 Supplement to ANSI C78.370-1997 and ANSI

19、 C78.390-1998 ELECTRIC LAMP, METHOD OF DESIGNATION Amendments to 6.6 ANSI C78.370-1997 7 ANSI C78.390-1998 7 Resolution Procedure If a manufacturer wishes to lodge an objection to the issuance of a new lamp code designation number, or to a proposed alternative or change to an existing number, The Pr

20、ogram Administrator must be notified in writing within 42 days after distribution to the appropriate industry representatives. The Administrator shall then notify the participants that an objection has been filed, and no designation will be assigned to the request, nor will any change in the recorde

21、d characteristics be made, pending resolution by the Administrator in consultation with both parties. Should the Administrator be unable to resolve to both parties satisfaction, the item of dispute shall be deferred to the appropriate subcommittee for resolution at their next regularly convened meet

22、ing. If by the 61 day, no comments or objections are received, the lamp code designation is considered approved, and any objection received after that time must go through an appeals process, during which the objecting manufacturer must explain in writing why the disputed lamp code was not questione

23、d during the 42 day comment period, and what detrimental effect the new code will have on that company. On/after the 60th day, the company making application for the new code may start using the new Lamp Code Designation . The 42 day comment period relates to the letter ballot period, but because of

24、 the nature of this work, 1 an additional 18 days is often granted. Copyright O 2002 by American National Standard Lighting Group - NEMA 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 ANSI C78.370-3901cd-2002 Supplement to ANSI C78.370-1997 and ANSI C78.390-1998 Copyright O 2002 by American N

25、ational Standard Lighting Group - NEMA 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 AMERICAN NATIONAL STANDARD FOR ELECTRIC LAMPS- METHOD OF DESIGNATION FOR ELECTRIC LAMPS-PHOTOGRAPHIC, STAGE AND STUDIO ANSI C78.370-1997 Revision of ANSI C78.370-1982 (RI 995) American National Standard fur

26、electric lamps- Method of Designation for Electric Lamps-Photographic, Stage and Studio Secretariat Accredited Standards Committee C78 National Electrical Manufacturers Association Approved August 20,1997 American National Standards Institute STD-NEMA C78.370-ENGL 1777 m b470247 0513242 B11 m ANSI C

27、78.370-1997 Revision of ANSI C78.370-1982 (R1995) Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and American other criteria for approval have been met by the standards Consensus is established when, in the judgment of the AN

28、SI National developer. Standard Board of Standards Review, substantia agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered,

29、 and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes

30、, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American

31、 National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time.

32、The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Insti

33、tute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 Copyright O 1997 by National Electrical Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system o

34、r otheiwise, without prior written penision of the publisher. Printed in the United States of America i Copynght (B 1997 by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 First Edition December 1997 ANSI C78.370-1997 Revision of ANSI C78.370-1982

35、(R1995) FOREWORD (This foreword is not part of ANSI C78.370-1987.) As stated in the scope of this standard, the intended application of the three letter code is only for photographic, stage and studio lamps. Recent discussion by Subcommittee C78-5 has refined the interpretation of photo lamps as tho

36、se whose primary applications are associated with the taking, processing, duplicating, viewing and projection of images. Such an interpretation does not encompass lamps for display, floodlighting or spotlighting applications. In actual practice some designation codes have been assigned to lamps for

37、display service. However, designation codes on such lamps do not appear to offer any advantage in controlling correct lamp replacement. Regular lamp ordering abbreviations such as those used on regular PAR lamps are more meaningful. Therefore, Accredited Standards Committee C78 on Electric Lamps pla

38、ns to cease the assignment of designation codes to display lamps after a suitable adjustment period. Three years from the approval date of this supplement to ANSI C78.370, the administrator will discontinue assignment of designation codes to display lamps. The scope and related sections of the stand

39、ard C78.370 will then be appropriately revised. During this period, lamp manufacturers should consider dual marking of lamp identification codes and revising the lamp catalogs as necessary. This standard contains annexes. Annexes A - D are normative and considered part of this standard; Annex E is i

40、nformative and is not considered pari of this standard. At the time it approved this standard, the C78 Accredited Standards Committee for Incandescent Lamps had the following members: AI Rousseau, Chairman, C78 and Technical Coordinator Randolph N. Roy, Secretariat Jeanne S. Evans, Coordinating Edit

41、or Organization Represented: Name of Representative: Advance Transformer Company . Norman Grimshaw Duro-Test Corporation Larry Sheinberg Edison Electric Institute . William Maguire (Delegate) General Electric Cynthia Minshall Illuminating Engineering Society . Rita M. Harrold ITS, Inc Craig Davenpor

42、t National Electrical Manufacturers Association (vacant) (Delegate) OSRAM SYLVANIA INC. Peter Bleasby Philips Lighting Company AI Rousseau Underwriters Laboratories, Inc. . David Belt Copytight O 1997 by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22

43、209 iii First Edition December 1997 STD-NEMA C78.370-ENGL L997 b470247 0513244 b94 m ANSI C78.370-1997 Revision of ANSI C78.370-1982 (R1995) At the time it approved this standard, the C78-1 Sub-committee for Photographic, Stage and Studio Lamps had the following members: Organization Represented: Na

44、me of Representative: Eastman Kodak Company William Moore GE Lighting Bernard Rachel OSRAM SYLVANIA INC. David Fox Philips Lighting Company AI Rousseau Underwriters Laboratories, Inc David Belt Cynthia Minshall (Alt.) Jeff rey Buschmann (Alt.) Ed Hinde (Alt.) iv Copyright Q 1997 by National Electric

45、al Manufacturers Association 1300 North 17th Street, Suite 1847, Rossiyn, VA 22209 First Edition December 1997 STD-NEMA C78.37U-ENGL 1997 M b470247 U513245 520 ANSI C78.370-1997 Revision of ANSI C78.370-1982 (R1995) CONTENTS . Foreword . III 1 Scope 1 2 Normative References 1 3 Definitions . 2 4 Des

46、cription of a Designation . 2 5 Criteria for Assignment of Designations for New Requests, Alternatives or Changes 2 6 Administration of this Standard . 3 7 Photographic, Stage and Studio Lamp Designation Request Form . 5 8 Glossary and Instructions for Photographic, Stage and Studio Lamp Designation

47、 Request Form . 5 ANNEXES A Schematic Lamp Drawings . A-1 B Filament Designations B-1 C Schematic Optical Projection Layouts C-1 D Photographic, Stage and Studio Lamp Designation Request Form . D-1 E Bibliography E-1 Copyright O 1997 by National Electrical Manufacturers Association 1300 North 17th S

48、treet, Suite 1847, Rossiyn, VA 22209 V First Edition December 1997 STD-NEMA C78.370-ENGL 1797 b470247 051324b Lib7 ANSI C78.370-1997 Revision of ANSI C78.370-1982 (RI 995) THIS PAGE INTENTIONALLY LEFT BLANK vi Copyyight O 1997 by National Electrical Manufacturers Association 1300 Norui 17th Street,

49、Suite 1847, Rosclyn, VA 22209 First Edition December 1997 AMERICAN NATIONAL STANDARD ANSI C78.370-1997 for electric lamps- Method of Designation for Electric Lamps- Photographic, Stage and Studio 1 Scope and purpose 1.1 Scope This standard describes a system for the designation of photographic, stage and studio lamps. A form is provided for the use of lamp manufacturers to request a designation assignment, altemative, or change. 1.2 Purpose The purpose of the designation system defined by this standard is to provide a nationally applicable and convenient lamp identification that ma