NAVY UFGS-23 81 23 00 20-2010 COMPUTER ROOM AIR CONDITIONING UNITS《计算机机房的空气调节装置》.pdf

《NAVY UFGS-23 81 23 00 20-2010 COMPUTER ROOM AIR CONDITIONING UNITS《计算机机房的空气调节装置》.pdf》由会员分享，可在线阅读，更多相关《NAVY UFGS-23 81 23 00 20-2010 COMPUTER ROOM AIR CONDITIONING UNITS《计算机机房的空气调节装置》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-23 81 23.00 20 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-23 81 23.00 20 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 23 - HEATING, VENTILATING, AND AIR

2、CONDITIONINGSECTION 23 81 23.00 20COMPUTER ROOM AIR CONDITIONING UNITS02/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.3 SUBMITTALS1.4 OZONE DEPLETION FACTOR1.5 ENVIRONMENTAL REQUIREMENTS1.6 SUSTAINABLE DESIGN REQUIREMENTS1.6.1 Local/Regional Materials1.6.2 Environmental DataPART 2 PRODUCTS2

3、.1 COMPUTER ROOM AIR CONDITIONING UNITS (CRACU)2.1.1 Cabinet and Frame2.1.1.1 Unit Cabinet2.1.1.2 Cabinet Interiors Sound Attenuation2.1.2 Fan Section2.1.3 Cooling Coil2.1.4 Filters2.1.5 Reheat Coil2.1.6 Humidifier2.1.7 Refrigeration System2.1.7.1 Compressors2.1.7.2 Refrigerant Tubing2.1.8 Condenser

4、2.1.8.1 Air-cooled Condenser2.1.8.2 Liquid-cooled Condenser2.1.8.3 Dry Coolers2.1.9 Space Temperature Control System2.1.10 Alarm Panel System2.1.11 Air Return and Delivery Orientation2.1.12 Floorstand2.2 Corrosion Protection For Coastal Installations2.2.1 Polyelastomer Finish Coating System2.2.1.1 H

5、eat Exchanger Coil (Including Evaporator Coil) SurfacesSECTION 23 81 23.00 20 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.2.1.2 Uninsulated Interior Surfaces and Exterior Surfaces2.2.1.3 Insulated Interior Surfaces2.2.2 Phenolic Finish Co

6、ating System2.2.2.1 Heat Exchanger Coil (Including Evaporator Coil) Surfaces2.2.2.2 Uninsulated Interior Surfaces and Exterior Surfaces2.2.2.3 Insulated Interior Surfaces2.3 ELECTRICAL2.3.1 Electrical Motors, Controllers, Contactors, and Disconnects2.3.2 Electrical Control Wiring2.4 HVAC WATER PIPIN

7、G AND METAL DUCTWORK2.5 FIRE PROTECTION DEVICES2.6 SOURCE QUALITY CONTROL2.6.1 Manufacturers Factory Test Plans2.6.1.1 Test Procedure2.6.1.2 Performance Variables2.6.1.3 Test Configuration2.6.1.4 Tested Variables2.6.1.5 Thermal Testing2.6.1.6 Specialized Components2.6.1.7 Factory Test For Sound Pres

8、sure Level2.6.1.8 Factory Tests Reporting Forms2.6.2 CRACU Production Schedule and Factory Test Schedule2.6.3 Factory Tests2.6.4 Deficiency Resolution2.6.5 Factory Test ReportsPART 3 EXECUTION3.1 INSTALLATION3.1.1 CRACU System3.1.2 Installation Instructions3.1.3 Connections to Existing Systems3.2 FI

9、ELD QUALITY CONTROL3.3 FIELD TESTING3.3.1 Manufacturers Field Test Plans3.3.1.1 Coordinated Testing3.3.1.2 Prerequisite Testing3.3.1.3 Test Procedure3.3.1.4 Performance Variables3.3.1.5 Test Configuration3.3.1.6 Tested Variables3.3.1.7 Thermal Testing3.3.1.8 Specialized Components3.3.1.9 Field Test

10、Reporting Forms3.3.2 Field Test Schedule3.3.3 Manufacturers Test Representative3.3.4 Field Tests3.3.5 Deficiency Resolution3.3.6 Field Test Reports3.4 WASTE MANAGEMENT- End of Section Table of Contents -SECTION 23 81 23.00 20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted

11、 without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-23 81 23.00 20 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-23 81 23.00 20 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 23 81 23.00 20COMPUTER ROOM AIR

12、 CONDITIONING UNITS02/10*NOTE: This guide specification covers the requirements for heating, ventilating, and cooling (HVAC) equipment for computer room air conditioning Units (CRACUs).Edit this guide specification for project specific requirements by adding, deleting, or revising text. For brackete

13、d items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the

14、specification. A listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*NOTE: Equipment includes cooling equipment less than211 KW 720,000 Btuh, and heati

15、ng equipment less than117 KW 400,000 Btuh.Use the most efficient, competitively available CRACU for which there are at least two products available for the indicated ranges of comparability. Design parameters for each item of equipment shall be indicated on the drawings including capacity, efficienc

16、y, sound ratings, motor speeds, electrical characteristics, and special features.System requirements must conform to UFC 3-410-02N, “Heating, Ventilating, Air Conditioning and Dehumidifying Systems“.SECTION 23 81 23.00 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted wit

17、hout license from IHS-,-,-*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and titl

18、e.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automa

19、tically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation

20、only.AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)AHRI 410 (2001; Addendum 2002) Forced-Circulation Air-Cooling and Air-Heating CoilsAMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)ANSI/ASHRAE 15 Std 15 Errata 2007, 2009, Std 34 Errata 2007, 2008, Add

21、enda a-v, x-ae) ANSI/ASHRAE Standard 15-Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-Designation and Safety Classification of RefrigerantsASHRAE 52.2 (2007; Addenda B 2008; Errata 2009) Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Part

22、icle SizeASHRAE 55 (2004; Errata 2007; Addendum a, b Addenda a, b, e, f and h 2008; Errata 2009) Ventilation for Acceptable Indoor Air QualitySECTION 23 81 23.00 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASHRAE 90.1 - IP (2007; Supplem

23、ent 2008; Errata 2009; Errata 2009; INT 1-3 2009) Energy Standard for Buildings Except Low-Rise Residential BuildingsASHRAE 90.1 - SI (2007; Supplement 2008; Errata 2009; Errata 2009; INT 1-3 2009) Energy Standard for Buildings Except Low-Rise Residential BuildingsASME INTERNATIONAL (ASME)ASME B16.2

24、2 (2001; R 2005) Standard for Wrought Copper and Copper Alloy Solder Joint Pressure FittingsASME B16.26 (2006) Standard for Cast Copper Alloy Fittings for Flared Copper TubesASME B31.1 (2007; Addenda a-2008) Power PipingASME B31.5 (2006) Refrigeration Piping and Heat Transfer ComponentsASME BPVC (20

25、07) all Purpose Codes and Standards Boiler and Pressure Vessels CodesASTM INTERNATIONAL (ASTM)ASTM B 280 (2008) Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field ServiceASTM D 5864 (2005) Standard Test Method for Determining Aerobic Aquatic Biodegradation o

26、f Lubricants or Their ComponentsASTM D 6081 (1998; R 2009) Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results InterpretationASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsETL TESTING LABORATORIES (ETL)ETL DLP (updated co

27、ntinuously) Directory of ETL Listed ProductsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2008; AMD 1 2008) National Electrical CodeNFPA 90A (2009; Errata 09-1) Standard for the Installation of Air Conditioning and Ventilating SystemsSECTION 23 81 23.00 20 Page 5Provided by IHSNot for ResaleNo

28、 reproduction or networking permitted without license from IHS-,-,-U.S. ARMY CORPS OF ENGINEERS (USACE)EM 1110-2-1424 (1999; Change 1; 1999 Change 2) Engineering and Design - Lubricants and Hydraulic FluidsU.S. ENVIRONMENTAL PROTECTION AGENCY (EPA)Energy Star (1992; R 2006) Energy Star Energy Effici

29、ency Labeling SystemU.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)UNDERWRITERS LABORATORIES (UL)UL Elec Equip Dir (2009) Electrical Appliance and Utilization Equipment Directory1.2 S

30、YSTEM DESCRIPTIONProvide newand modify existing computer room air conditioning units (CRACU) complete and ready for operation. Size equipment based on Design Manual CS from the Air Conditioning Contractors of America; do not oversize.1.3 SUBMITTALS*NOTE: Submittals must be limited to those necessary

31、 for adequate quality control. The importance of an item in the project should be one of the primary factors in determining if a submittal for the item should be required.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked wi

32、th a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects,

33、 a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other orga

34、nization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy projects.SECTION 23 81 23.00 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,

35、-,-Submittal items not designated with a “G“ are considered as being for information only for Army projects and for Contractor Quality Control approval for Navy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor

36、 Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:*NOTE: For LANTNAVFACENGC0M projec

37、ts, Contractor submittals for the CRACUs shall be Contracting Officer approved by LANTNAVFACENGCOM Mechanical Design Branch, in spite of who is the Designer of Record. Ensure that Section 01 33 00 SUBMITTAL PROCEDURES, paragraph “Submittals Reserved for LANTNAVFACENGCOM Approval“ covers this submitt

38、al requirement. *SD-03 Product DataComputer room air conditioning units; GSubmit documentation for Energy Star qualifications or meeting FEMP requirements. Indicate Energy Efficiency Rating.Space temperature control system drawings; G Filters; (LEED)Submit documentation indicating type of biobased m

39、aterial in product and biobased content. Indicate relative dollar value of biobased content products to total dollar value of products included in project. Submit documentation indicating relative dollar value of rapidly renewable materials to total dollar value of products included in project. Loca

40、l/Regional MaterialsSubmit documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin from the project site. Indicate relative dollar value of local/regional materials to total dollar value of products included in project. Environm

41、ental DataSD-06 Test Reports*NOTE: Specify factory tests for CRACUs with a capacity greater than 52,700 W 180,000 Btuh*SECTION 23 81 23.00 20 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- CRACU production schedule and factory test schedule;

42、GManufacturers factory test plans; GFactory test reports; GField test schedule; GManufacturers field test plans; GField test reports; GAquatic toxicitySD-07 CertificatesCertificate of Specification Compliance; GCredentials of the manufacturers field test representative; GSD-08 Manufacturers Instruct

43、ionsInstallation manual for each type of CRACUSD-10 Operation and Maintenance DataSubmit in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.Computer room air conditioning units, Data Package 4; G1.4 OZONE DEPLETION FACTOR*NOTE: EPA, per the Significant New Alternative Policy rule, re

44、views refrigerant substitutes on the basis of ozone depletion potential, global warming potential, toxicity, flammability, and exposure potential. Lists of acceptable and unacceptable substitutes are updated several times each year. A chronological list of SNAP updates is available at http:/www.epa.gov/ozone/snap/refrigerants/lists/index.htmlor from the stratospheric ozone information hotline at 1 (800) 296-1996. Reducing ozone depletion