NAVY UFGS-21 22 00 00 20-2011 HALON 1301 FIRE EXTINGUISHING《卤化烃1301消防设施》.pdf

《NAVY UFGS-21 22 00 00 20-2011 HALON 1301 FIRE EXTINGUISHING《卤化烃1301消防设施》.pdf》由会员分享，可在线阅读，更多相关《NAVY UFGS-21 22 00 00 20-2011 HALON 1301 FIRE EXTINGUISHING《卤化烃1301消防设施》.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-21 22 00.00 20 (May 2011)-Preparing Activity: NAVFAC SupersedingUFGS-21 22 00.00 20 (November 2009)UFGS-21 22 00.00 20 (April 2006)UFGS-13966N (September 2000)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2011*SECTION TA

2、BLE OF CONTENTSDIVISION 21 - FIRE SUPPRESSIONSECTION 21 22 00.00 20HALON 1301 FIRE EXTINGUISHING05/11PART 1 GENERAL1.1 REFERENCES1.2 GENERAL REQUIREMENTS1.2.1 Description of Work1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Record of Prior Installations1.4.2 Halon Fire Extinguishing System1.4.3 Manufactu

3、rers Representative1.5 DESIGN OF HALON FIRE EXTINGUISHING SYSTEMS1.5.1 Piping Layout and Wiring Diagrams1.5.2 Calculations1.5.3 Flooding Concentration1.5.3.1 Halon Concentration1.5.4 Discharge Time1.5.5 Reserve Supplies1.5.6 Record Drawings1.6 SYSTEM CONTROL1.6.1 Controls1.6.2 Sequence of Operation1

4、.6.2.1 Activation By Manual Station1.6.2.2 Manual Activation of Inhibit Switch1.6.3 Transfer to reserve supply1.6.4 Remote Control Station Operating InstructionsPART 2 PRODUCTS2.1 PIPING2.1.1 Pipe2.1.2 Fittings2.1.3 Pipe Hangers and Supports2.1.4 Pipe Sleeves2.1.5 Escutcheon PlatesSECTION 21 22 00.0

5、0 20 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.6 Discharge Nozzles2.1.7 Storage Cylinders2.1.8 Jointing Compound2.2 CONTROL PANEL2.3 SECONDARY POWER SUPPLY2.3.1 Storage Batteries2.3.2 Battery Charger2.4 MANUAL ACTUATION STATIONS2.5 SM

6、OKE DETECTORS2.5.1 Ionization Detectors2.5.2 Photoelectric Detectors2.5.3 Detector Spacing and Location2.6 DUCT SMOKE DETECTORS2.7 INHIBIT SWITCH2.8 ALARM SIGNALING DEVICES2.8.1 Audible Alarms2.8.2 Visual Alarms2.9 MAIN ANNUNCIATOR2.9.1 Annunciation Zones2.9.2 Annunciator Panels2.10 AUTOMATIC FIRE D

7、AMPERS2.11 ELECTROMAGNETIC DOOR HOLDER RELEASE2.12 ELECTRICAL WORK2.12.1 Wiring2.12.2 Operating Power2.12.3 Conductor IdentificationPART 3 EXECUTION3.1 PIPE INSTALLATION3.2 FIELD PAINTING3.2.1 Systems in Unfinished Areas3.2.2 Systems in All Other Areas3.3 FIELD TESTING3.3.1 Preliminary Tests3.3.2 Fo

8、rmal Inspection and Tests3.3.2.1 System Function Tests Without Halon Discharge3.3.2.2 Halon Discharge Tests3.4 OPERATING INSTRUCTIONS3.5 TRAINING REQUIREMENTS- End of Section Table of Contents -SECTION 21 22 00.00 20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without

9、license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-21 22 00.00 20 (May 2011)-Preparing Activity: NAVFAC SupersedingUFGS-21 22 00.00 20 (November 2009)UFGS-21 22 00.00 20 (April 2006)UFGS-13966N (September 2000)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated

10、April 2011*SECTION 21 22 00.00 20HALON 1301 FIRE EXTINGUISHING05/11*NOTE: This guide specification covers the requirements for Halon 1301 fire extinguishing systems for protection of data processing equipment and similar electronics occupancies.Adhere to UFC 1-300-02 Unified Facilities Guide Specifi

11、cations (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate informati

12、on.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*NOTE: Use of this guide specification requ

13、ires a waiver in accordance with NAVFAC Ozone Depleting Substances (ODS) Procurement Policy and Procedures with the approval of a Senior Acquisition Officer (SAO). With minor changes, this guide can be adapted to other occupancies or needs, such as the protection of electric generators and flight si

14、mulators. The extent and location of the work to be accomplished, and the type of electric service, cables, wire, conduit, location of storage cylinders, actuating stations, control panels, storage batteries, battery chargers, and accessories indicated, specified, or necessary for the complete insta

15、llation required shall be indicated on the project drawings. If there are questions concerning SECTION 21 22 00.00 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-system design, the cognizant Engineering Field Division Fire Protection Engine

16、er should be consulted. Due to the toxicity of decomposed Halon, an engineered smoke and Halon removal system (not part of this specification) will be required for each protected space. Such a system shall be manually key operated, for fire department use only. See also NFPA 12A section on relief ve

17、nting.*NOTE: The following information should be shown on the drawings:1. On the electrical power floor plans show locations of control panel, annunciator(s), audible and visual alarm devices, manual actuation stations, point of connection to the building fire evacuation alarm system, remote trouble

18、 device, and point of connection to the incoming power supply and fusible safety switch. Do not show conduit sizes or number of conductors for DC circuits. Do not show locations of smoke detectors.2. Show single line riser diagram for all detection, activation, and alarm circuits. Connection of equi

19、pment shall be indicated by circuit runs and not conduit runs. Do not indicate number and size of conductors for interconnection of fire alarm components.3. On the mechanical floor plans, show locations for Halon storage containers. Show areas of system coverage, with zone designations (if multiple

20、zones). Do not show Halon piping layout and nozzle placement.*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organi

21、zation, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.Referenc

22、es not used in the text will automatically be deleted from this section of the project SECTION 21 22 00.00 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-specification when you choose to reconcile references in the publish print process.*Th

23、e publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASME INTERNATIONAL (ASME)ASME B16.11 (2009) Forged Fittings, Socket-Welding and ThreadedASME B16.3 (2006) Malleable Iron Threaded Fit

24、tings, Classes 150 and 300ASTM INTERNATIONAL (ASTM)ASTM A106/A106M (2010) Standard Specification for Seamless Carbon Steel Pipe for High-Temperature ServiceASTM A53/A53M (2010) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessFM GLOBAL (FM)FM APP GUIDE (u

25、pdated on-line) Approval Guide http:/ STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY (MSS)MSS SP-58 (2009) Pipe Hangers and Supports - Materials, Design and Manufacture, Selection, Application, and InstallationMSS SP-69 (2003) Pipe Hangers and Supports - Selection and Application (ANSI A

26、pproved American National Standard)NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 12A (2009) Standard on Halon 1301 Fire Extinguishing SystemsNFPA 70 (2011) National Electrical CodeNFPA 72 (2010; TIA 10-4) National Fire Alarm and Signaling CodeNFPA 75 (2009) Standard for the Protection of Informati

27、on Technology EquipmentNFPA 90A (2009; Errata 09-1) Standard for the Installation of Air Conditioning and Ventilating SystemsSECTION 21 22 00.00 20 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-U.S. DEPARTMENT OF DEFENSE (DOD)MIL-STD-101 (197

28、0; Rev B) Color Code for Pipelines Notice 2) Enamel, Alkyd, Gloss, Low VOC ContentCID A-A-58092 (Basic) Tape, Antiseize, PolytetrafluoroethyleneFS TT-P-645 (Rev B; Am 1) Primer, Paint, Zinc-Molybdate, Alkyd TypeUNDERWRITERS LABORATORIES (UL)UL Fire Prot Dir (2011) Fire Protection Equipment Directory

29、1.2 GENERAL REQUIREMENTSSection 23 03 00.00 20 BASIC MECHANICAL MATERIALS AND METHODS, applies to this section, with the additions and modifications specified herein.1.2.1 Description of Work*NOTE: Identify the rooms, spaces or areas, as appropriate, which are to be protected by each type of system.

30、*The work includes the designing and providing of approved Halon 1301 underfloor and room flooding extinguishing system(s) for protection of _. The design, equipment, materials, installation and workmanship shall be in strict accordance with the required and advisory provisions of NFPA 12A, except a

31、s modified herein. Each system shall include all materials, accessories and equipment inside and outside the building necessary to provide each system complete and ready for use. Design and install each system to give full consideration to built-in spaces, piping, electrical equipment, ductwork and

32、all other construction and equipment and to be free from operating and maintenance difficulties, all in accordance with detailed drawings to be submitted to the Contracting Officer for approval. Devices and equipment for fire protection service shall be of a make and type listed by the Underwriters

33、Laboratories, Inc., or approved by the Factory Mutual System. In the publications referred to herein, the advisory provisions shall be considered to be mandatory, as though the word “shall“ had been substituted for “should“ wherever it appears; reference to the “authority having jurisdiction“ shall

34、be interpreted to mean the _ Division Fire Protection Engineer.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept SECTION 21 22 00.0

35、0 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”.

36、 Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code o

37、f up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization

38、in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for A

39、rmy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal f

40、or the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES: The fire protection engineer, _ Division, Naval Facilities Engineering Command will review any approve all submittals in this section requiring Government approval.*NOTE: For projects admini

41、stered by the Pacific Division, Naval Facilities Engineering Command, use the optional “SUBMITTALS“ article immediately below and delete the general “SUBMITTALS“ article above for Navy projects.* The _ Division, Naval Facilities Engineering Command, Fire Protection Engineer delegates the authority t

42、o the Quality Control (QC) Representatives U.S. Registered Fire Protection Engineer for review and approval of submittals required by this section. Submit to the _ Division, Naval Facilities Engineering Command, Fire Protection Engineer one set of all approved submittals and drawings immediately aft

43、er approval but no more later than 15 working days prior to final inspection.SD-02 Shop DrawingsHalon system piping layout; G; G, _SECTION 21 22 00.00 20 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Field wiring diagrams; G; G, _SD-03 Product DataStorage cylinders; G; G, _Discharge heads; G; G, _Manifolds; G; G, _Valves; G; G, _Discharge nozzles; G; G, _Pipe; G; G, _Pipe hangers and supports; G; G, _Control panel; G; G, _Manual actuation stations; G; G, _Pressure