NAVY OO-D-1388 B-1984 DISHWASHING MACHINES COMMERCIAL (RACKLESS CONVEYOR)《无架传输商用洗碗机》.pdf

《NAVY OO-D-1388 B-1984 DISHWASHING MACHINES COMMERCIAL (RACKLESS CONVEYOR)《无架传输商用洗碗机》.pdf》由会员分享，可在线阅读，更多相关《NAVY OO-D-1388 B-1984 DISHWASHING MACHINES COMMERCIAL (RACKLESS CONVEYOR)《无架传输商用洗碗机》.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、00-D-1388B 21 May 1984 SUPERSEDING November 23, 1977 00-D-1388A FE DERAL SPE CI F IC AT1 ON DISHWASHING MACHINES , COMMERCIAL (RACKLE SS CONVEYOR) This specification was approved by the Assistant Administrator, Off ice of Federal Supply and Services, General Services Administration, for the use of a

2、ll Federal agencies. 1. SCOPE AND CLASSIFICATION 1.1 Scope. This specification covers fully-automatic, multiple-tank, spray-type dishwashing machines equipped with rackless conveyors for holding dishes and trays in an inclined position without prior racking. shall also be capable of accommodating st

3、andard dishwashing racks when preracking of cups, glasses, and flatware cylinders is desired or required. The machines 1.2 Classification. 1.2.1 Types, sizes, styles, groups, and feed directions. The dishwashing machines shall be of the following types, sizes, styles, groups, and feed directions , a

4、s specified (see 6.2) : Type I - Multiple tank without prewash Type II - Multiple, tank with recirculating prewash Type III - Multiple tank with high-capacity, recirculating prewash- Size 7500 - Nominal Size 9250 - Nominal Size 10250 - Nominal Siie 11500 - Nominal Size 13000 - Nominal Size 15000 - N

5、ominal Size 18000 - Nominal operating capacity of 7500 dishes per hour operating capacity of 9250 dishes per hour operating capacity of 10250 dishes per hour operating capacity of 11500 dishes per hour operating capacity of 13000 dishes per hour operating capacity of 15000 dishes per hour operating

6、capacity of 18000 dishes per hour Style 1 - Steam heated. Style 2 - Electrically heated Group 1 - 20- to 31-inch conveyor width, inclusive Group 2 - 20- to 26-i.nch conveyor width, inclusive Group 3 - 27- to 31-inch conveyor width, inclusive Feed direction LR - Conveyor feed left to right Feed direc

7、tion RL - Conveyor feed right to left FSC 7320 THIS DOCUMENT CONTAINS A? PAGES. Licensed by Information Handling ServicesO-D-1388B 2. APPLICABLE DOCUMENTS 2.1 The following documents, of the issues in effect on date of invitation for bids or request for proposal, form a part of this specification to

8、 the extent specified herein. Federal Specifications : P-I)-1800 - Dishwashing Compound, Machine QQ-N-281 - Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sect ions Castings 200 Pound; Threaded End, Flanged Ends, Solder Ends, and Brazed Ends for

9、Land Use) Flanged, Solder End, for Land Use) QQ-N-288 WW-V-51 - Valve, Angle, Check, and Globe Bronze (125, 150, and - Nickel-Copper Alloy and Nickel-Copper-Silicon Alloy WW-V-54 - Valve, Gate, Bronze (125, 150, and 200 Pound, Screwed, Federal Standards: FED-CTD-H28 - Screw Threads for Federal Servi

10、ces FED-STD-123 - Marking for Shipment (Civil Agencies) (Activities outside the Federal Government may obtain copies of Federal specifications, standards, and commercial item descriptions as outlined under General Information in the Index of Federal Specifications, Standards, and Comercial Item Desc

11、riptions. The Index, which includes cumulative bimonthly supplements as issued, is for sale on a subscription basis by the Superin- tendent of Documents, U.S. Government Printing Office, Washington, DC 20402. (Single copies of this specification and other Federal specifications and comrcial item des

12、criptions required by activities outside the Federal Govern- nient: for bidding purpoaes are available without charge from General Services Administration Business Service Centers in Boston, MA; New York, NY; Philadel- phia, PA; Washington, DC; Atlanta, GA; Chicago, IL; Kansas City, MO; Fort Worth,

13、TX; Houston, TX; Denver, CO; San Francisco, CA; Los Angeles, CA; and Seattle, NA. (Federal Government activities may obtain copies of Federal standardization documents, and the Index of Federal Specifications, Standards, and Comercial Item Descriptions from established distribution points in their a

14、gencies. Military Cpecif icat ions : MIL-V-173 - Varnish, Moisture-and-Fungus-Resistant, (for Treat- ment of Communications, Electronic, and Associated Equipment) MIL-V-1202 - Valve, Globe; Valve, Angle; Valve, Cross; Bronze, Regrindable-Renewable Types MIL-M-11495 - Meter, Detergent Concentration f

15、or Dishwashing Machines 2 Licensed by Information Handling Services00-D-1388B MIL-R-24039 - Racks and Cylinders for Mechanical Dishwashing MIL-1-43728 - Injector, Rinse, Automatic, for Commercial Dishwashing MIL-D-43729 - Dispensing Unit, Detergent, Automatic, for Commercial MIL-K-43875 - Kitchen Eq

16、uipment, Including Unit Assemblies, Repair Machines Machines Dishwashing Machines Parts and Tools; Preparation for Delivery of Militan Standards : MIL-STD-105 - Sampling Procedures and Tables for Inspection by MIL-STD-129 - Marking for Shipment and Storage MIL- STD-461 - Electromagnetic Emission and

17、 Susceptibility Require- Attributes ments for the Control of Electromagnetic Interference (Copies of military specifications and standards required by contractors in connection with specific procurement functions should be obtained from. the procuring activity or as directed by the contracting offic

18、er.) Federal Regulations : Occupational Safety and Health Administration (OSHA): Title 29, Code of Federal Regulations, Chapter XVII: Part 1910. Occupational Safety and Health Standards “(The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a subscription basis by the

19、Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. When indicated, reprints of certain regulations may be obtained from the Federal agency responsible for i s suanc e ther eo f. “ 2.2 Other publications. The following documents form a part of this specification to th

20、e extent specified herein. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply AIR-CONDITIONING AND REFRIGERATION INSTITUTE (AR11 : AR1 410 - Standard for Forced Circulation Air Cooling and Air Heating Coils (Application for copies shoul

21、d be addressed to the Air-conditioning and Refrigeration Institute, 1815 North Fort Myer Drive, Arlington, VA 22209.) AMERICAN NATIONAL STANDARDS INSTITUTE. INC. (ANSI) : S1.4 - Specification for Sound Level Meters S1.13 - Methods for the Measurement of Sound Pressure Levels (Application for copies

22、should be addressed to the American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018.) _= - Licensed by Information Handling ServicesOO-D-1388B AMERICAN SOCIETY OF MECHANICAL ENGImERS (ASME): Section 8 Pressure Vessels, Division I (Application for copies should be addressed to t

23、he American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.) AMERICAN SOCIETY F0.I TESTING AND MATERfALS (ASTM): A120 - Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) B164 - Nickle-Copper Alloy, Rod and Bar B167 - Stainless and Heat R

24、esisting Chromium Nickel Steel, Plate, Sheet B302 - Threadless Copper Pipe C553 - Mineral Fiber Blanket and Felt Insulation (Industrial Type) Welded and Seamless for Ordinary Use and Strip (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street

25、, Philadelphia, PA 19103.) NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) : ICs 2 - Industrial Control Devices, Controllers and Assemblies MG 1 - Motors and Generators (Application for copies should be addressed to the National Electrical Manufacturers Association, 2101 L Street, N.W., Washing

26、ton, DC 20037,) NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) No. 70 - National Electrical Code (Application for copies should be addressed to the Nat ional Fire Protection Association, Batterymarch Park, Quincy, MA 02269,) NATIONAL SANITATION FOUNDATION (NSF) : No. 3 - Spray-Type Dishwashing Machines

27、 No. 5 - Hot Water Generating Equipment for Food Service Establishments Using Spray-Type Dishwashing Machines (Application for copies should be addressed to the National Sanitation Foundation, NSF Building, 3475 Plymouth, Ann Arbor, MI 48106,) SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE) : 5534 Lubri

28、cation Fittings. (Application for copies should be addressed to the Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) Licensed by Information Handling Services00-D-23B 73 W 9999979 00223g7 2 W 00-D-1388B UNDERWRITERS LABORATORIES INC. (UL) : Electrical Appliance a

29、nd Utilization Equipment List 73 - Motor Operated Appliances 921- Commercial Electric Dishwashers (Application for copies should be addressed to the Underwriters Labora- tories Inc. , 333 Pfingsten Road , Northbrook, IL 60062.) (Industry association specifications and standards are generally availab

30、le for reference from libraries. They are also distributed among technical groups and using Federal agencies. ) 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specifica- tion shall take precedence. 3. REQUI

31、REMENTS 3.1 Description. The dishwashing machines shall be of the multiple-tank without prewash, rackless conveyor-type consisting essentially of a loading section, a pumped wash section, a pumped rinse and final rinse section, and an unloading section. In addition, type II and III machines shall in

32、clude a recirculating prewash section. The identification of the sections specified herein shall be established on the basis of the functions performed. Refer- ence to sectional construction does not imply that machines must necessarily consist of identifiable, individual, separable sections assembl

33、ed to form a composite machine. Each dishwashing machine shall include a rackless conveyor system and all tanks, pumps , motors , piping, valves , controls , and appurten- ances necessary to form a complete, automatic, dishwashing machine. The conveyor widths for the dishwashing machines shall likew

34、ise be within the specified ranges; the particular width within the applicable range to be in accordance with the manufacturers standard practice. Other options, such as style, size, and feed direction shall be as specified in the contract or order. When specified (see 3.13, 6.2, and 6.3.4), a blowe

35、r/dryer shall be provided. 3.2 First article. When specified (see 6.2), the contractor shall furnish a complete diswashing machine for first article inspection and approval (see 4.2.1 and 6.4). 3.3 Safety and health requirement. The machine shall be equipped with safety devices for all parts that pr

36、esent safety hazards. include cover and guards for moving parts and shockproof controls for protec- tion from mechanical and electrical hazards to personnel. All guards shall provide easy access to guarded parts and shall not interfere with operation of the macliine. machine shall comply with standa

37、rds promulgated under OSHA, Title 29, Code of Federal Regulations, Chapter XVII: machine it sel f. The devices shall Except as otherwise specified by the procuring activity, the Part 1910, which are applicable to the 3.4 Standards compliance. Dishwashing machines shall conform to UL 73, UL 921, NSF

38、N. 3 and No. 5. air shall be in accordance with AR1 410. Steam coils in the blower/dryer used for heating 5 Licensed by Information Handling Services-D-1388B 3.4.1 Certification. Prior to approval of the first article, if one is submitted or prior to approval of the first shipment, the contractor sh

39、all submit satisfactory evidence to the contracting officer or his authorized representative that the dishwashing machine he proposes to supply under this specification meets the requirements of UL 73, UL 921, NSF No. 3 and No. 5, and the steam coils meet the requirements of AR1 410. 3.4.2 UL certif

40、ication. Acceptable evidence of meeting the requirements of UL 73 and UL 921 shall be the UL label, listing in the lJL Electrical Appli- ance and Utilization Equipment List, or a certified test report from a nation- ally recognized independent testing laboratory, acceptable to the contracting office

41、r, stating that the dishwashing machine offered has been tested and conforms to UL 73 and UL 921. 3.4.3 NSF certification. Acceptable evidence of meeting the requirements of NSF No. 3 and No. 5 shall be the NSF seal on the finished dishwashing machines, inclusion in the current edition of the NSF Li

42、sting of Food Service Equipment, or a certified test report from a recognized independent testing laboratory acceptable to the medical department of the service for which the dishwashing machines are being procured, indicating that a dishwashing machine of the same model that is being furnished unde

43、r this specification has been tested and conforms to NSF No. 3 and No. 5. 3.4.4 AR1 certification. Acceptable evidence of meeting the requirements of AR1 410 shall be the AR1 seal on the blower/dryer, indicating that the steam coils for heating air have been tested in accordance with AR1 410. 3.4.5

44、Applicability. The dishwashing machines shall meet the dimensional requir“ments, tank capacities, pumping rates, conveyor characteristics, and all other requirements of this specification. The contractor shall select the machine to be offered as meeting these requirements from his models which have

45、an NSF-approved operating capacity not less than the nominal capacity specified herein. This capacity shall be attainable without exceeding the listed conveyor width or speed under which the NSF approval was granted. Machines which have NSF-approved hourly dish handling capacities complying with thi

46、s specification but which in other respects do not meet the requirements herein will not be acceptable, 3.5 Interchangeability. All dishwashing machines of the same classifica- tion furnished with similar options under a specific contract shall be identi- cal to the extent necessary to insure interc

47、hangeability of component parts, assemblies, accessories, and spare parts. 3.6 Materials. Materials used shall be free from defects which would adversely affect the performance or maintainability of individual components or of the overall assembly. same quality used for the intended purpose in comme

48、rcial practice. otherwise specified herein, all equipment, material, and articles incorporated in the work covered by this specification are to be new and fabricated using materials produced from recovered materials to the maximum extent possible without jeopardizing the intended use. The term “reco

49、vered materials“ means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials, as opposed to virgin raw Materials not specified herein shall be of the Unless 6 Licensed by Information Handling Services00-D-13B 73 U 7997974 0022147 b 00-D-1388B materials. used or rebuilt products are allowed under this specification unless otherwise specified. None of the above shall be interpreted to-mean that the use of 3,6.1 Corrosion-resistant steel, Corrosion-resistant steel shall meet the requirements of ASTM B167 stainless steel type