NAVY MIL-W-15964 A-1952 WHEELS ABRASIVE AND HONES HAND (DIAMOND IMPREGNATED)《把手和细磨刀石的砂轮(嵌金刚石)》.pdf

《NAVY MIL-W-15964 A-1952 WHEELS ABRASIVE AND HONES HAND (DIAMOND IMPREGNATED)《把手和细磨刀石的砂轮(嵌金刚石)》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-W-15964 A-1952 WHEELS ABRASIVE AND HONES HAND (DIAMOND IMPREGNATED)《把手和细磨刀石的砂轮(嵌金刚石)》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、7 MARCH 1952 SUPERSEDING 15 MARCH 1951 MIGW-l5964(SHIPS) MILITARY SPECIFICATION WHEELS, ABRASIVE; AND HONES, HAND (DIAMOND IMPREGNATED) This specification was approved by the Departments of the Amy, the Navy, and the Air Force for the use of procurement serviees of the respective Departments. 1. SCO

2、PE MILITARY 1.1 This specification covers resinoid bond JAN-P-105 -Packaging and Packing for Overseas Shipment-Boxes ; Wood, Cleated, Plywood. JAN-P-106 -Packaging and Packing for Overseas Shipment-Boxes ; Wood, Nailed. and metal bond diamond-impregnated wheels and hand hones for precision grinding

3、and lapping operations on materials such as ce- meted carbides, refractory ceramic products, high speed steel milling cutters, etc. 2. APPLICABLE SPECIFICATIONS, STANDARDS, DRAWINGS, AND PUBLI- CATIONS 2.1 The following specifications and stand- ards, of the issue ineffect on date of invita- tion fo

4、r bids, form a part of this specifica- tion : SPECIFICATIONS FEDERAL NN-B-591 -Boxes, Fiberboard, Wood-Cleated, (for Domestic Ship- ment). NN-l3-601 -B ox e s , Wood-Cleated- Plywood, for Domestic Shipment. MIGB-107 -Boxes, Wo o d , Wir e - bound (Overseas Type). JAN-P-108 -Packaging and Packing for

5、 Overseas Shipment-Boxes, Fiber- board (V-Board and W-Board), Ex- terior and Interior. JAN-Pd126 -Packaging and Packing for Overseas ShipmenLBarriey-Ma- terials, Waterproof, Flexible. JAN-P-133 -Packaging and Packing for Overseas Shipment-Boxes, Set- Up, Paperboard. MIGA-140 -Adhesives, W at er-Re-

6、sistant, Waterproof, Barrier-Material. NAVY DEPARTMENT General Specifications for Inspection of “43-621 -Boxes, Wood, N ai 1 e d “43-631 -Boxes, Wood, Wise- Material. and hck-Corner. bound, for Domestic Shipment. STANDARDS UU-(2-5343 -Cushioning Materials, MILITARY Cellulosic. LLLB-631 -Boxes, Fiber

7、, C ors u - MIL-STD-105-S am p 1 i n g . Procedures gated (for Domestic Shipment). and Tables for Inspection by Attri- LLL-B-636 -Boxes, Fiber, Solid (for butes. Domestic Shipment). MIGSTD-129-Marking of Shipments. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

8、from IHS-,-,-MIL-W-15964A (Copies of specifications, standards, and drawings required by contractors in connection with specific procurement functions should be obtained from the procuring agency or as directed by the contracting officer.) 2.2 Other publications. - The following publication, of the

9、issue in effect on date of invitation for bids, unless otherwise stated, forms a part of this specification : U.S. DEPARTMENT OF COMMERCE Simplified Practice Recommendation R45-47 on Grinding Wheels, July 1, 1947. (Application for copies should be addressed to the Superintendent of Documents, Govern

10、ment Printing Office, Washington 26, D. C.) 3. REQUIREMENTS 3.1 Qualification,-Diamond impregnated abrasive wheels and hones furnished under this specification shall he a .product which has been tested and has passed the qualifica- tion tests specified in section 4 (see 6.2). 3.2 Material.-The abras

11、ive section of the wheels and hones shall be made of diamond abrasive and bonding materials eonsidered by the manufacturer to be best suited for the work to be performed. 3.3 Bond.-The wheels and hand hones shall be furnished with resinoid or metal bond, as specified (see 6.1). 3.4 Shape and dimensi

12、ons.-The shape and dimensions of wheels and hand hones shall be as specified (see 6.1). (“Type” as used in this specification designates the shape of wheel, as practiced in industry and specified in the Department of Commerce Simplified Practice Recommendation R45-47 on Grind- ing Wheels, July 1,194

13、7.) 3.5 The wheels and hones, when used to grind cemented carbide tools, shall be free cutting, shall resist loading and glazing, pro- duce a satisfactory finish, hold a satisfactory edge, and shall not require frequent cleaning or dressing. 3.6 The diamond abrasive, when examined under a binocular

14、microscope, shall be uni- form in size and distribution of grain. 3.7 Wheels shall be balanced to run at the operating speed without vibration. 3.8 Two blotting paper disks of appropriate size and thickness, or their equivalent, shall be provided with each peripheral type wheel. 3.9 Marking. 3.9.1 E

15、ach wheel 2nd hone shall be marked or labeled in a legible manner with the follow- ing data: Manufacturers name or trade-mark. Abrasive type (wheels only). Grain size. Grade (wheels only). Concentration (wheels only). Bond type. Depth of diamond impregnation. Speed recommended for service (wheels Si

16、ze (wheels only). only 1 3.9.2 Wheels and hones in sizes and shapes which do not permit marking in the above manner may be marked with the required data in accordance with the best commercial practice. 3.10 Workmanship. - The workmanship shall be first class in every respect. 4. SAMPLING, INSPECTION

17、, AND TEST PROCEDURES 4.1 Inspection procedures. - For Naval purchases, the general inspection procedures shall be in accordance with General Specifi- cations for Inspection of Material. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILW-15964A 4

18、.2 Qualification tests at a Government laboratory.-Qualification tests shall be con- ducted at a Government laboratory desig- nated by the Bureau of Ships. These tests shall consist- of the tests specified in 4.5. 4.3 Sampling for lot acceptance. 4.3.1 Inspection lot.-All wheels or hones of the same

19、 bond, shape, and size presented at one time shall be considered a lot for pur- poses of acceptance inspection. 4.3.2 Sampling for inspection.-A random sample of wheels or hones shall be selected from each inspection lot of material offered for Government inspection of visual and di- mensional chara

20、cteristics with lot acceptance based on the single sampling inspection re- quirements cif table I in accordance with Standard VlIGSTD-105. TABLE I.-Sampling for visual and dimen- sional inspection AQL (appyox.) = 1.5 percent defective Number of Number wheels or i of wheels hones in or hones inspecti

21、on lot in sample 15 and under- 7 16 to 40- 10 41 to 110- 15 111 to 300- 25 301 and over- 35 Acceptance number (defec- tives) O O O 1 i Rejection number (defec- tives) offered again for Government inspection pro- vided the contractor has removed all non- conforming wheels or hones. The Government ins

22、pector shall again select and examine sam- ples from such resubmitted lots to verify compliance with this specification. 4.5 Test procedures. 4.5.1 The manufacturer shall furnish wheels as specified in 4.5.2 of the type or types regularly manufactured and of such grade as, in his opinion, will give

23、the best results when operated under the conditions specified herein. The sample wheels shall be taken from the manufacturers regular stock, and shall be representative of the quality of the product to be furnished under contract or order. 4.5.2 The sample wheels shall be as fol- (a) Two straight ty

24、pe 1, resinoid bond wheels for grinding chip breakers in cemeted carbide cutters. lows : Diameter, 6 inches. Thickness, inch. Hole diameter, inch. Depth of diamond impregna- tion in periphery, 1/8 inch. Diamond concentration, 100. Grit size, 100. (b) Two cup type 6, metal bond wheels for off-hand gr

25、inding single point cemented carbide tools. Diameter, 6 inches. Thickness, inch. Rim width, x, inch. Back thickness, 7/i6 inch. Hole diameter, 1% inches. Depth of diamond impregna- tion in rim, %- inch. 1 Separate lists dl be maintained for each bond of diamond impregnated abrasive wheel and hone co

26、vered by this specification. Manufacturers listed on the Military Qualified Products List for resinoid bond diamond impregnated abrasive wheels will be con- . sidered qualified to furnish resinoid bond diamond impregnated band hones. Manufacturers listed on the Military Qualified Prod- ucts List for

27、 metal bond diamond impregnated abrasive wheels * will be considered qualified to furnish metal bond diamond im- pregnated hand hones. 4.4 Inspection. 4.4.1 Visual and dimensional inspection.- Each of the sample wheels or hones selected in accordance with table I shall be visually and dimensionally

28、inspected by the Govern- ment inspector to verify compliance with this specification. Any wheel or hone in the sample containing one or more visual or di- mensional defects shall be rejected, and if the number of defective wheels or hones in any sample exceeds the acceptance number for that sample,

29、the lot represented by the sam- ple shall be rejected. Rejected lots may be 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flIL-W-L57hLIA 53 777790b 0100970 3 MIL-W-15964A Diamond concentration, 100. Grit size, 120. Each wheel shall have four equa

30、lly spaced bolt holes drilled and countersunk from the rim side for ?L or the abrasive surface has worn to such a degree that the wheel is no longer usable. 4.5.4 The cup type 6, metal bond wheel shall be used to off-hand grind single point cemented carbide tipped tools under standard operating cond

31、itions at approximately 5,500 surface feet per minute. A coolant shall be iised. When considered necessary during the test, by reason of loading, grooving, or slow material removal, the wheel shall be lapped using standard procedure. The wheel shall be operated until it loads, glazes, or grooves to

32、such an extent that it can no longer be satisfactorily dressed ; retards production to an appreciable extent by reason of too fre- quent lapping; or the abrasive surface has worn to such a degree that the wheel is no longer usable. 4.5.5 The sample wheels when tested as specified in 4.5.3 and 4.5.4,

33、 shall produce the finish specified on the minimum number of cemented carbide tipped tools shown in table II. TABLE II.-Pefo?*ntccnce Tequirements Maximuni tool finish tools ground 1 r,m,s, Rliiiimum , Bond number of I microinches I Resinoid - _ _ _ 1,000 j 18.0 Metal _ _ 7,500 3.0 4.5.6 The right i

34、s reserved to destroy the sample wheels submitted for the purpose of determining the nature f the abrasive ma- terial. 4.6 The purpose of the tests specified here- in is to determine the quality of diamond im- pregnated abrasive wheels for the specified type of work. It is not considered necessary t

35、hat these tests be performed for all exhibitors on the same machines and the Government reserves the right to substitute one make of machine or another or to overhaul exist- ing machines provided that in its opinion, the essential performance characteristics of the machine are maintained. 5. PREPARA

36、TION FOR DELIVERY 5.1 Packaging. 5.1.1 Wheels.-Wheels shall be individually packaged with cellulosic material conforming to Specification UU-C-843 in full telescope, shouldered, or slide Set-up boxes conforming to Specification JAN-P-133. 5.1.2 Ho?ses.-Hones shall be individually packaged in snug-fi

37、tting, full telescope, shoul- dered, or slide Set-up boxes conforming to Specification JAX-P-133. 0.2 Packing. 5.2.1 FOT domestic shipment.-Wheels and hones, packaged as specified in 5.1, shall be packed in wood-cleated fiberboard, wood- cleated plywood, nailed wood, wirebound wood, corrugated fiber

38、, or solid fiber boxes 8 i . - I. . I- - . ri. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-conforming to Specification NN-B-591, NN- B-601, NN-B-621, NN-B-631, LLL-B-631 or LLL-B-636, respectively. Gross weight of shipping containers shall not ex

39、ceed approxi- mately 150 pounds. The gross weight of fiber- board boxes shall be subject to the limitation of the box specification. 5.2.1.1. Closure of fiberboard boxes. - Bottom flaps shall be sealed by means of a suitable adhesive or shall be metal-stitched, or by a combination of both. Top flaps

40、 shall be sealed, stitched, taped, or closed by a com- bination of any.of these methods. If taped, kraft gummed tape of not less than 2i/-inch width, 60-pound basis weight shall be used. Three strips shall be applied to the top so that all seams are covered their full length. Tape applied over cente

41、r lengthwise seam shall extend at least 3 inches on to each of the end panels. 5.2.2 For oversea shipment.-Wheels and hones, packaged as specified in 5.1, shall be packed in cleated plywood, nailed wood, wire- bound, or fiberboard boxes conforming to Specification JAN-P-105, JAN-P-106, MIL B-107, or

42、 JAN-P-108, respectively. Ship- ping containers shall be lined with a sealed waterproof bag made of material conforming to Specification JAN-P-125, for case liners. Seams and closures shall be sealed with ad- hesive conforming to Specification MIL-A- 140. The gross weight shall not exceed ap- proxim

43、ately 150 pounds for boxes of wood construction; 70 pounds for boxes of fiber- board construction. 5.2.3 For domestic or oversea shipment.- Shipping containers shall be of uniform size, shall contain the same number of items, and shall be designed to fit the contents in a com- pact manner. 5.3 Marki

44、ng.-In addition to any special marking required by the contract or order, marking shall conform to Standard-MIL STD-129. MIL-W-159bLIA 53 9 7777906 0100771 5 = , MIL-W-15964A 6. NOTES 6.1 Ordering data. - Procurement docu- ments should specified the following: (a) Title, number, and date of this spe

45、ci- (b) Bond required (see 3.3). (c) Shape and dimensions (see 3.4). (d) Grain size and grade or type of oper- ation to be performed and kind of material to be ground (see 3.9.1). (e) Concentration and depth of diamond impregnation (see 3.9.1). fication. (f) The make, model number, and spindle speed

46、 of the grinding ma- chine (wheels only) (see 3.9.1). (g) Whether packing for domestic or oversea shipment is required (see 5.2). 6.2 In the procurement of products requir- ing qualification the right is reserved to re- ject bids on products that have not been sub- jected to the required tests and f

47、ound satis- factory for inclusion on the Military Qualified Products List. The attention of suppliers is called to this requirement and manufacturers are urged to communicate with the Bureau of Ships, Navy Department, Washington 25, D. C., and arrange to have the products that they propose to offer

48、to the Army, the Navy, or the Air Force, tested for qualification in order that they may be eligible to be awarded contracts or orders for the products covered by this specification. Information pertaining to qualification of products covered by this specification may be obtained from the Chief of t

49、he Bureau of Ships, Navy Department, Washington 25, D. C. 6.3 In the event that wheels have been tested in accordance with 6.2, and subsequent tests are desired by the manufacturer on im- proved products, consideration will be given for additional tests. However, the manufac- turer is required to submit with his applica- tion a certified report of tests conducted in his laboratory which clearly show that defi- Provided by IHSNot for ResaleNo reproduction or networking pe