NAVY MIL-STD-1322-90-1988 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT WARHEADS MK 5 MK 10 MK 51 MK 90 MK 91 MK 115 AND MODS OR TELEMETERING INSERTS AN DKT-26 AN DKT-27 AN DKT-42 A10 M.pdf

《NAVY MIL-STD-1322-90-1988 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT WARHEADS MK 5 MK 10 MK 51 MK 90 MK 91 MK 115 AND MODS OR TELEMETERING INSERTS AN DKT-26 AN DKT-27 AN DKT-42 A10 M.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1322-90-1988 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT WARHEADS MK 5 MK 10 MK 51 MK 90 MK 91 MK 115 AND MODS OR TELEMETERING INSERTS AN DKT-26 AN DKT-27 AN DKT-42 A10 M.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、M I LI TARY STAN DARD MIL-STD-1322-90 (NAWI . 18 NOVEMBERlSB8 UNIT LOAD FOR DMESTIC AND OVERSEAS SHIPMENT WARHEAQS MK 5, MK 10, MK 51, MK 90, MK 91, MK 115 AND MODS OR IN CONTAINER, MK 211 AND MODS TELEMETERING INSERTS AN/DKT-26, AN/DKT-27, AN/DKT-42 AND MODS UNIT LOAD DATA NUMBER OF CONTAINERS PER

2、UNIT LOAD . 9 GROSS WEIGHT OF ONE CONTAINER SEE TABLE 1 WEIGHT OF PALLET AND DUNNAGE. 170 LBS GROSS EIGHT OF UNIT LOAD SEE TABLE 1 CUBE 98.6 CU FT DOT HAZARD CLASS . SEE TABLE 1 CG CLASS . SEE TABLE 1 AUSC NO. - N/A DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC RELEASE : DISTRIBUTION IS UNLIMITED. NO

3、TES: I. 2. UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING. CONTAINERLOADING AND CARLOADING MILITARY TDA SYSCOM STANDARDS, REFER TO INDEX TO STANDARDS. REV L TR 1 FSC 8141 DATE MIL-HDBK-236 NAVY). REVISION DESCRIPTION APPROVAL I THIS UNIT LOAD IS A

4、UTHORIZED AND RELEASED FOR DEPOT HANDLING AND STORAGE AND FOR SHIPMENT BY COMMON CARRIER. / - /6-B.B 11- /Y- ti8 WNSTA EARLE DATE SIGNATURE BY DIRECTION DATE U REQUIREMENTS FOR CONSTRUCTION OF MIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-STD-1322 (NAVY). /d -3/-p# / DATE

5、OR I GIN ATOR WPNCTA EARLE, NEW JERSEY IpAGF I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322-90 (NAVY) TABLE 1 DODICI NALC GROSS WT OF CONTAINER GROSS WT HAZARD OF UNIT LOAD CLASS 1022 LBS CG CLASS vi1 vi1 NOMENCLATURE MK 5 MOD 7 V370

6、213 LBS KK 1C MOD O v373 226 LES 1074 LES I A V351 229 L8S _- 229 LES 1086 LES 1 A vi1 MK 51 MOD O MK 51 MOD 1 1086 LES IA v11 V356 MK 90 MOD O v453 230 LES 1090 LES 1042 LES 1074 LES v11 v11 v11 V532 MK 95 MOD O MK 115 MOD O 218 LBS 226 LBS YW87 AH IDKT-26 zw33 240 LES 1130 LBS INERT INERT ANIDKT-2

7、6A ZW51 I ZW52 ZW53 240 LES INERT 1130 LBS INERT ANIDKT-27.4 240 LBS INERT ZW48 I ZW49 ZW50 HW91 IHM92 HW9316W78 6W7916W80 6W88 1130 LES INERT 1130 LES INERT INERT ANIDKT-278 240 LES ANIDKT-27C 6W81I6M82 ME3 I6W84 6W8516W86 6w87 2qo LES 1130 LES INERT INERT INERT INERT 1 ANIDKT-42142A 240 LBS 1130 L

8、BS 1 INERT QW46IQW50 QW51 JW58IJW59 JW60IYW77 7w37I71.152 m53 ANIDKT-428 240 LRS PAGE 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5 a I M Il-STO-13 22-90 (NAVY) CONSTRUCTION AND PALLETIZING DETAILS PALLETIZING PROCEDURE I SEE DETAIL A . PAGE 3

9、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322-90 (NAVY) PALLETIZING_ PROCEDURE . (A) (BI THREAD STRAPPING. ITEM 2. THROUGH SLOTS IN PALLET DECK. ITEM i. AS SHOWN IN MTAIL A. INSTALL GIRTHWISE STRAPPING, ITEM 4, AND STAPLES. ITEM 6. ON

10、THE PREFABRICATED TOP AND BOTTOM FRAMES. (cl PLACE THE BOTTOM FRAME ASSEMBLY OM THE PALLET DECK CJITH EQUAL OVERHANG ON BOTH SIDES. (DI POSITION THE FOUR CONTAINERS OVER THE CLEATS ON THE BOTTOE1 FRAME. THE CONTAINERS SHALL BE TOWARD THE OUTSIDE. IDENTIFICATION MARKINGS ON (E) PLACE THE TOP FRAME AS

11、SEMBLY OVER THE CONTAINERS, AS SHOWN. AND POSITION STRAPPING, ITEM 2. AROUND THE UNIT LOAD. TENSION AND DOUBLE NOTCH SEAL, ITEM 5. (F) POSITION STRAPPING, ITEM 3. UIDER THE PALLET DECK AND AROUND THE UNIT LOAD. TENSION AND DOUBLE NOTCH THE SEAL. (G) SECURE THE STRAPPING TO THE TOP FRAME WITH STAPLES

12、, ITEM 6. AS SHOWN. MARKING: IW AOOITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322 (NAVY). DEPALLETIZING PROCEDURE NOTE: 00 NOT REMOVE GIRTHbJISE STRAPPING AND STAPLES FROM THE PREFABRICATED TOP AND BOTTOfl FRAMES. REMOVE STAP

13、LES FROM THE LATERAL AND LONGITUDINAL STRAPPING. (A 1 (6) CUT ANO REMOVE LATERAL AND LONGITUDINAL STRAPPING. (C) REMOVE TOP FRAME. (D) REMOVE CONTAINERS. (E) PEMOVE BOTTOM FRAME, NOTES: (1) UNLESS OTHERWISE SPECIFIED, ALL MATERIALS SHALL BE IN ACCORDANCE WITH MIL-STO-1322 (NAVY). DO NOT USE TYPE I STRAPPING WITH POWER MACHINES. (2) (3) 4-119 ACTUAL WIDTH. REVIEW ACTIVITY: NAVY -OC PREPARING ACTIVITY: NAVY -OS (PROJECT MO. 814O-N730) *.S. GOVERNMENT PRINTING OFFICE: 1983 - 606033/12672 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-