NAVY MIL-S-22219-1959 STAND BOOSTER TEST MK 12 MOD 0《MK 12 MOD 0 增压经受实验》.pdf

《NAVY MIL-S-22219-1959 STAND BOOSTER TEST MK 12 MOD 0《MK 12 MOD 0 增压经受实验》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-S-22219-1959 STAND BOOSTER TEST MK 12 MOD 0《MK 12 MOD 0 增压经受实验》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、MILITARY SPEC IF ICAT ION 6 November 1959 STAND, BOOSTER TEST, MK 12 MOD O 1. SCOPE 1.1 This specification covers one type of mobile booster test stand for use with the TERRIER missile booster BT-3. 2. Applicable Documents 2.1 The following documents of the issue in effect on date of invita- tion fo

2、r bids, form a part of this specification. MILITARY SPECIFICAT IONS MIL- P- 116 MIL-B-121 Barrier Material, Grease proofed, Flexible Preservation, Methods of (Waterproofed) PPP-B- 621 Boxes, Wood , Nailed and Lock-Corner STANDARDS Military k MIL-STD-105 Sampling Procedures, and Tables for Inspection

3、 by Attribut es Marking for Shipment and Storage MIL-STD-129 DRAWINGS Bureau of Ordnance LD 489038 and all drawings, specifications, and Mod O standards listed thereon. Stand, Booster Test MI 12 (Copies of specifications, standards, and publications required by contractors in connection with specifi

4、c procuranent functions should be obtained from the procuring agency by the contracting officer). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-22217 47 W 9777706 - 0246017 2 MIL-s-22219 (Nord) 3. REQUIREMENTS 3.1 Materials. Components of the

5、 booster test stands shall be made Alloy composition, of materials as specified on the applicable drawings. hardness, and other characteristics of all materials shall comply with the provisions of the pertinent specification and as indicated on the applicable drawing. 3.2 Design changes. No design c

6、hange shall be made in any component which will alter the functional characteristics of the complete equiment. Design changes not in the foregoing category but intended only to simplify fabrication, may be made only on receipt of approval in writing, prior to manufacture or use, from the Bureau of O

7、rdnance. shall not constitute a deviation from the requirements of this specification. 3.3 Dimensions. Dimensions and tolerances shall be as specified on Approval of such changes the pertinent drawings. be adhered to within the limitations customary in good comercial practice. here tolerances are no

8、t given, the dimensions shall 3.4 Finish. Metal components shall be finished in accordance with requirements on the pertinent drawings. be free from burrs, roughness, and excessive oxides or corrosion. The surfaces of all components shall 3.5 Markings. All identification nameplates and markings indi

9、cated on the drawings shall be present and shall be clearly legible. 3.6 Workmanship. The stands shall be uniform in appearance and of good quality, comparable to general comercial practice. free from cracks, burrs, splits, sharp edges and other defects which may hinder their functional operation or

10、 be injurious to handling personnel, They shall be . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-2E!2119 49 W 9999906 02460118 L1 W MIL-S -22219 (Nord) 4. QUALITY ASSURANCE PROVISIONS 4.1 Contractors responsibility. Unless otherwise specifi

11、ed herein the supplier is responsible for the performance of all inspection require- ments prior to submission for Government inspection and acceptance, Except as otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to the Government. Inspection re

12、cords of the examinations and tests shall be kept complete and available to the Government as specified in the contract or order. 4.2 Sampling. Sampling for examination shall be conducted in accordance with Standard MIL-STD-105. 4.3 Lot. Lot size for examination shall be the individual booster test

13、stand. 4.4 Examination. The sample stands shall be carefully inspected and measured to determine conformance with the requirements of this specifica- tion and the applicable drawings. 4.5 Packaging. The inspector shall ascertain that the packaging method used will comply with the general requirement

14、s of this specification. 5. PREPARATION FOR DELIVERY 5.1 Preservation and Packaging. The stands shall be packed for domes- tic shipment in such manner as to insure acceptance by common carrier for safetransportation at the lowest rate to the point of delivery. protection from physical damage must be

15、 provided, including protection against damage by weather. If the equipment is to be shipped overseas the requirements for overseas shipment shall be applicable. Adequate Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-22217 47 W 9797706 024601

16、9 b MIL-S-22219(NO%d) 5.1.1 Level. A. 5.1.1.1 Cleaning. Unless otherwise specified, the Booster Test Stand shall be cleaned in accordance with Method C-1 of Specification MIL-P-116. 5.1.1.2 Drying. Unless otherwise specified the Booster Test Stand shall be dried in accordance with one or more of the

17、 procedures given in Specification MIL-P-116 - provided the procedure is not injurious to the item. 5.1.1.3 Preservative application. Unpainted ferrous metal surfaces subject to corrosion shall be brush coated with P-2 type preservative in accordance with Specification MIL-P-116. 5.1.1.4 Unit packag

18、ing. Unit packaging of the Booster Test Stand shall be in accordance with Method I of Spcification MIL-P-116. preserved as specified in 5.1.1.3 shall be wrapped in barrier material conforming to MIL-B-121, Grade A so as to protect the preservative coated surfaces. twine. Surfaces Barrier material sh

19、all be held in place by a suitable tape or 5.1.1.5 intermediate package. Not applicable. 5.1.2 Level B. Not applicable. 5.1.3 Level C. 5.1.3.1 Cleaning and drying. Cleaning and drying shall be in accordance with 5.1.1. 5.1.3.2 Preservative application. None. 5.1.3.3 Unit Packaging. Unit packaging a

20、Method III of Specification MIL-P-116. 5.1.3.4 Intermediate package. Not applicable, be in accordance with Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_7 MIL-S-22219 49 W 3999906 0246020 2 m MIL-S-22219 (Nord) 5.2 Packing 5.2.1 Level A 5.2.1.1 Ex

21、terior Containers. The Booster Test Stand packaged as described in 5.1 snall be packed in a wood box conformizig to Specification PPP-B-621, Class 2, Style 2 or Style 4. Sufficient blocking and bracing s :all be provided to prevent damage to theequipment during shipment and multiple handling. 5.2.2

22、Level B. - Not applicable 5.2.3 Level C. The Booster Test Stand packaged in accordance with 5.1 shall be packed to afford protection against damage during direct shipment from the supply source to the first receiving activity for immediate use. Containers shall comply with tiie carrier rules and reg

23、ulations applicable to trie mode of transportation. 5.3 Marking 5.3.1 Special Markings. - None 5.3.2 Normal Markings. In addition to tne markings required by contract or order, unit packages, intermediate packages (when used), and shipping containers shall be marked in accordance with the requiremen

24、ts of MIL-STD-129, including serial numbers. 6. NOTES 6.1 Intended use. The booster test stands procured under this specification are intended for use in testing the TERRIER missile booster BT-3. The stands will accept the ET-3 in either handling bands or slings and may be used to position the handl

25、ing bands. The stands can be rolled about to move the component to the desired position. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-6.2 Security, Preparation, production, and handling of classified material shall be in conformity with provisions

26、 of the Industrial Security Manual for Safe-guarding Classified Information (Attachment to DD Form 441) and current security regulations of the cognizant Inspector of Naval Material 6.3 Ordering data. Procurement documents should specify the title, number, and date of this specification. 6.4 Options

27、. Desired options shall be forwarded to the contracting officer prior to use by the contractor. 6,4.1 The attention of the contracting officer is invited to the Quality Assurance Provisions and options in Specification MIL-P-116, 6.5 Criteria for use of proper level of preservation, packaging and pa

28、cking shall be as follows: For Level A. This level shall be used or those items which are to be shipped to indeterminate destinations or stored under indeterminate con- ditions for redisbribution anywhere. For Level C. This level shall be used only when it is definitely known that the packaged item

29、is to be shipped to domestic installations for immediate use at the first receiving activity. 6.6 Notice, When Government drawings, specifications, or other data are used for any purpose other than in connection with a definitely related Government procurement operation, the United States Government

30、 thereby incurs no responsibility nor any obligations whatsoever; and the fact that the Government may have formulated, furnished, or in any way supplied the said drawings, specifications, or other data is not Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Cuc todians Navy-Birreau of Ordnance Preparing Activity Navy-Bureau of Ordnance Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-