NAVY MIL-S-19816 A (2)-1973 SWITCH STERILIZING MARK 1 MODS 0 AND 1 (FOR EXPLODER MECHANISM MARK 19 SERIES)《 MARK 1 MODS 0 和 1 灭菌开关(用于MARK 19系列起爆机构)》.pdf

《NAVY MIL-S-19816 A (2)-1973 SWITCH STERILIZING MARK 1 MODS 0 AND 1 (FOR EXPLODER MECHANISM MARK 19 SERIES)《 MARK 1 MODS 0 和 1 灭菌开关(用于MARK 19系列起爆机构)》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-S-19816 A (2)-1973 SWITCH STERILIZING MARK 1 MODS 0 AND 1 (FOR EXPLODER MECHANISM MARK 19 SERIES)《 MARK 1 MODS 0 和 1 灭菌开关(用于MARK 19系列起爆机构)》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-S-LSLbA (2) 13 I 7S7SSOb 0300455 I MIL-S-l9816A(OS) AMENDMENT 1 6 Nowamber 1967 MILITARY SPECIFICATION I SWITCH, STERILIZING, MARK 1 MODS O AND 1 (For Exploder Mechanism Mark 19 Series) This amendment forms a part of Military Speci- fication MIL-S-l9816A(OS) of 15 June 1967 and has been approv

2、ed by the Naval Ordnance Systems Command, Department of the Navy Page 1: In specification title, delete “MARK 1 MOD O“ and substitute “MARK 1 MODS O AND 1“. Page 1, paragraph 1.1: Delete %ark 1 Mod O“ and substitute “Mark 1 Mods O and 1“. Page 1, bottom: Page 2, under “DRAWINGS“: Delete “FSC 5930“ a

3、nd substitute “FSC 1355“. Add “LD 620286 Sterilizing Switch Mark 1 Mod 1 and all parts and subassemblies listed thereon. * Page 2, under “PUBLICATIONS“. Add the following: “OR- 11 Development of Packaging, Handling, Storage and Transportation Systems for Weapons“ Page 2, paragraph 3.1 Delete and sub

4、stitute: “3.1 Description. The sterilizing switch shall consist of a stainless steel housing that contains a driver, springloaded contact, and stationary contact, The driver of the Mod O switch shall be covered by an aluminum foi1 seal, while the driver of the Mod 1 switch shall be covered by a plas

5、- tic sheet seal, Both types of seals shall be easily pierced by a screw- driver to operate the switch. The construction of the swlt that it may be operated from an initial open circuit positi and closed circuit position. from closed to open circuit position through the use of a suitable tool, See 4

6、.4.8.2. shall be such For test purposes, the switch may be operated Page 3, paragraphs 3.2.3, 3.2.4, 3.2.5, and 3.2.6: Delete “in LD 275.922“ and substitute “in LD 275922 or LD 620286“. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-S-LS81bA (2)

7、 13 I 777770b 0300456 3 MIL- S-19816A (OS) AMENDMENT * Page 3, Page 4, “3.2.9 documents * 2 paragraphs 3.2.7 and 3.2.8: paragraph 3.2.9. Delete and substitute: ConflictinR requirements, In the event of conflict betw referenced herein and the contents of this Specification Delete in.their entirety. c

8、ontents of this specification shall apply.“ Page 5, paragraph 3.4.6: Delete paragraph title and substitute: W (applicable to Mod O Switch only) .It * Page 5, paragraph 3.5.1.1. Delete and substitute: “3.5.1.1 Vibration; transportation, storage, and handling. Re cteriliz- ing switch, packaged and pac

9、ked as specified in Section 5, chal in accordance with 4.4.1.1. Thereafter, the switch shall show shall meet all the performance requirements and product characteristics of this specification.“ Page 6, paragraph 3.5.2.1. Delete and substitute: “3.5.2.1 Shock: transportation, storage, and handlinq. n

10、e sterilizing * switch, packaged and packed as specified in Section 5, shall be tested in accordance with 4.4.2.1. Thereafter, the switch shall show no damage and shall meet all the performance requirements and product characteristics of this specification. I * Page 8, paragraph 4.1. Delete and subs

11、titute: “4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the perform- ance of all inspection requirements as specified herein. wise specified in the contract or order, the supplier may use his own or any o er facilities

12、 suitable for the performance of the inspection require- ments specified herein, unless disapproved by the Government, The Government reserves the right to perform any of the inspections set forth in the spec- ification where such inspections are deemed necessary to assure supplies and services conf

13、orm to prescribed requirements.“ Except 3s other- * Page 10, paragraph 4.4.1.1. Delete and substitute: “4.4.1.1 Vibration; transportation, storage, and handling. aie steriliz- ing switch, packaged and packed as specified in Section 5, shall be subjected to the appropriate vibration testing specified

14、 in OR-11. * Page 10, paragraph 4.4.2.1. Delete and substitute: “4.4.2.1 Shock; transportation, storage, and hanlinq. Ihe sterilizing switch, packaged and packed as specified in Section 5, shall be subjected to the appropriate shock testing specified in OR-11.“ Page 12, paragraph 4.4.8.2, lines 2 an

15、d 3: Delete “pierce the aluminum foil seal and rotate the driver and substitute “pierce the aluminum foil seal on the Mod O or the plastic sheet seal on the Mod 1 and rotate the driver. I . ,*. . . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-

16、S-17LbA (2) 13 I 77777Ob 0300Li57 5 I MIL-S-19 816A (OS) AMENDMENT 2 Page 14, paragraph 4.5.4.3, line 2: Delete ?before the foil seal is secured“ and substitute %efore the foil or plastic seal, whichever is used, is secured“. Page 14, paragraph 4.5.4.6: Delete paragraph title and substitute :Seal te

17、st (Ml07) (applicable to Mod O Switch only)“ Page 5, paragraph 6.1: Delete “Sterilizing Switch Mk 1 Mod O is“ and substitute “Sterilizing Switches Mk 1 Nods O and 1 are“. The margins of this amendment are marked withan asterisk to indicate where changes (additions, modifications, corrections, deleti

18、ons) from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. c Custodian Navy - OS Preparing Activity Navy - OS Project No. 1355-N315 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-