NAVY MIL-L-19701 B-1983 LUBRICANT ALL-WEATHER SEMI-FLUID FOR AIRCRAFT ORDNANCE METRIC《公制飞机兵器用半液体全天候润滑剂》.pdf
《NAVY MIL-L-19701 B-1983 LUBRICANT ALL-WEATHER SEMI-FLUID FOR AIRCRAFT ORDNANCE METRIC《公制飞机兵器用半液体全天候润滑剂》.pdf》由会员分享,可在线阅读,更多相关《NAVY MIL-L-19701 B-1983 LUBRICANT ALL-WEATHER SEMI-FLUID FOR AIRCRAFT ORDNANCE METRIC《公制飞机兵器用半液体全天候润滑剂》.pdf(13页珍藏版)》请在麦多课文档分享上搜索。
1、- y MIL-L-17701B 71 M 7779706 0102738 7 MIL-L-19701 B 8 November 1983 SUPERSEDING 28 March 1969 MIL-L-l9701A(AS MILITARY SPECIFICATION LUBRICANT, ALL-WEATHER, SEMI-FLUID, FOR AIRCRAFT ORDNANCE, METRIC This specification is approved for use by all Departments and Agencies of the Department of Defense
2、. 1. SCOPE 1.1 Scope. This specification covers the requirements for a semi-fluid lubricant intended for the lubrication of aircraft machine guns and accessory equipment between -55C and 70C and under cold-sweat-cold cycling conditions. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifi
3、cations, standards, and handbooks. Unless otherwise specified, the following specifications, standards, and handbooks of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this specification to the e
4、xtent specified herein. SPECIFICATIONS FEDERAL PPP-C-96 - Can, Metal, 28 Gage and Lighter. MI LI TARY MIL-P-5516 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degree Fahrenheit. STANDARDS FEDERAL FED-STD-313 - Material Safety Data Sheets Preparation and Sub- mission of Beneficial co
5、mments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Engineering Specifications and Standards Department (Code 931, Naval Air Engineering Center, Lakehurst, NJ 08733, by using the self-addressed Standardization D
6、ocument Improve- ment Proposal (DD Form 1426) appearing at the end of this document or by letter. FSC 9150 THIS DOCUMENT CBNTAINS PAGES. % m Licensed by Information Handling ServicesY MI LI TARY MI L-STD-105 d Sampling Procedures and Tables for Inspection by Attributes. MI L-STD-2 90 - Packaging of
7、Petroleum and Related Products. AIR FORCE - NAVY AERONAUTICAL AN 6227 - Packing, O-Ring Hydraulic. 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this specifi- cation to the extent specified herein. PU
8、BLICATIONS CODE OF FEDERAL REGULATIONS 49 CFR - Transportation - Hazardous Materials. (Application for copies should be addressed to the Superintendent of Documents, Government Printing Office, Nashington, DC 20402.) (Copies of specif i cations, standards, handbooks, drawings, and pub1 i cations re-
9、 quired by manufacturers in connection with specific acquisition functions should be obtained from the cbntracting activity or as directed by the contracting officer.) The following documents form a part of this specifi- cation to the extent specified herein. The issues of the documents which are in
10、- dicated as DoD adopted shall be the issue listed in the current DoDISS and the supplement thereto, if applicable. 2.2 Other publications. AMERICAN SOC1 ETY FOR TESTING AND MATERIALS (ASTM) ASTM D 471 - Rubber Property - Effect of Liquids. ASTM D 942 - Oxidation Stability of Lubricating Greases by
11、the Oxygen Bomb Method. ASTM D 972 - Evaporation Loss of Lubricating Greases and Oils. (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.1 AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI 2129.1 - American Nationa
12、l Standard for the Precautionary Labeling of Hazardous Industrial Chemical s. (Application for copies should be addressed to the American National Standards Institute, 1430 Broadway, New York, NY 10018.) (Industry association specifications and standards are generally available for reference from li
13、braries. They are also distributed among technical groups and usin Federal agencies. 1 2 Licensed by Information Handling ServicesMIL-L-19701 B 2.3 Order of precedence. specification and the references cited herein, the text of this specification shall take precedence. In the event of a conflict bet
14、ween the text of this 3. REQUIREMENTS 3.1 Qualification. The lubricant furnished under this specification shall be products which are qualified for listing on the applicable qualified products list at the time set for opening of bids (see 4.3 and 6.3). 3.2 Composition. The lubricant shall be of an a
15、pproved composition consisting of components of a grade and quality which have been demonstrated under firing tests to be suitable for the purpose intended and which will formulate a semi- fluid lubricant that conforms to all of the requirements of this specification (see 6.5). 3.3 Physical properti
16、es. Physical properties of the lubricant shall be in accordance with Table I. 3.4 Material safety data sheets. Material safety data sheets shall be prepared and submitted in accordance with FED-STD-313. Material safety data sheets shall also be forwarded as specified in 4.3.2. The grease shall have
17、no adverse effect on the health of personnel when used for its intended purpose. Questions pertinent to this effect shall be referred by the contracting activity to the appropriate departmental medical service who will act as an advisor to the contracting agency (see 4.3.2 and 6.2.1.e). QUALITY ASSU
18、RANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspec- tion requirements as specified herein. tract or purchase order, the contractor may use his own or any other facilities su
19、itable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to
20、prescribed requirements: Except as otherwise specified in the con- 4.2 Classification of inspections. The inspection requirements specified herein are classified as follows: a. Qualification inspection (see 4.3). b. Quality conformance inspection (see 4.4). 4.3 Qualification inspection. Qualificatio
21、n inspection shall consist of a review of the test report (see 4.3.2) for approval, and by testing to determine that the qualification inspection sample (see 4.3.1). complies with all the require- ments for the physical properties specified in Table I when tested in accordance with the inspection me
22、thods specified in Table II and 4.6.4 through 4.6.10.2. 4.3.1 Qualification inspection sample. The qualification inspection sample shall consist of 5 kilograms of lubricant. The sample shall be forwarded to the 3 Licensed by Information Handling Services- _- _- - MIL-L-1970LB 71 W 4797406 01012741 7
23、 m MIL-L-197018 4.4.2.1 For examination of filled containers. A random sample of filled con- tainers, fully prepared for delivery, shall be selected from each lot of grease in accordance with MIL-STD-105, Inspection Level I with an Acceptable Qual i ty Level I (AQL) of 2.5 percent defective, Aircraf
24、t and Crew Systems Technology Directorate, Code 60612, Naval Air Development Center, Warminster, PA 18974. The sample shall be plainly identified by a secure- ly attached durable tag or label marked with the following information: Sample for qualification inspection. Name of manufacturer. Product co
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVYMILL19701B1983LUBRICANTALLWEATHERSEMIFLUIDFORAIRCRAFTORDNANCEMETRIC 公制 飞机 兵器 液体 全天候 润滑剂 PDF
链接地址:http://www.mydoc123.com/p-980137.html