NAVY MIL-K-81779 C-1977 KIT TOOL SPECIAL TK-222( ) AWM-23(V)《TK-222( ) AWM-23(V)型特殊工具包》.pdf

《NAVY MIL-K-81779 C-1977 KIT TOOL SPECIAL TK-222( ) AWM-23(V)《TK-222( ) AWM-23(V)型特殊工具包》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-K-81779 C-1977 KIT TOOL SPECIAL TK-222( ) AWM-23(V)《TK-222( ) AWM-23(V)型特殊工具包》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-K-1777C q7 m 777770b 0256650 m MIL -K-81779C (AS) 11 July 1977 Superseding 6 December 1974 MIL-K-81779B (AS) MILITARY SPECIFICATION KIT, TOL, SPECIAL TK-222( )/AWM-23(V) This specification has been approved by the Naval Air Systems Command, Department of the Navy. 1. SCOPE 1.1 Scope. This specif

2、ication covers the performance, design, and test requirements for the Special Tool Kit (STK) TK-222( )/AWM-23(V) . 2. APPLICABLE DOCUMENTS 2.1 General. The following documents of the issue specified in AS-4053, Applicable Document List for AWCS Test Set AN/AWE.I-23(V), form a part of this specificat

3、ion to the extent specified herein. MIL-T-81734(AS) shall be the applicable general specification for the STK described herein (see 6.6). SPECIFICATION Mil i tary MIL-T-81734 (AS) Test Set, Airborne Weapon Control System, AN/AIvM-23(V) DRAWING Hughes Aircraft Company 493601-1XX Kit, Tool, Special Be

4、neficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ment (Code 93) Naval Air Engineering Center, Lakehurst, N.J. 08733, by using self-addressed Standardization Document Improvement Propo- sal (DD Form

5、 1426) appearing at the end of this document or by letter. Engineering Specifications and Standards Depart- IA Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VIL-K-L779C Y9 9 9999706 025665L T MIL -K-8 1779C (AS) 2.2 Availability of documents. Appli

6、cable (see 6.6). 2.3 Precedence of documents. When the requirements of the contract, this specification, or applicable subsidiary documents are in conflict, the following precedence shall apply: (a) Contract - The contract shall have precedence over any other document. (b) This specification - This

7、specification shall have precedence over all applicable subsidiary documents (see 6.6). (c) Referenced documents - Any document referenced in this speci- fication shall have precedence over all applicable documents referenced therein. 3. REQUIREMENTS 3.1 Materials, parts, and processes. Applicable e

8、xcept as follows (see 6.6). 3.1.1 Selection of materials, parts, and processes. Applicable. 3.1.1.1 Approval of nonstandard materials, parts, and processes. Applicable. 3.1.2 Flammable materials. Applicable. 3.1.3 Cables and connectors. .Not applicable. 3.1.4 - Wire. Not applicable. 3.1.5 Rotary.swi

9、tches. Not applicable. 3.1.6 Finishes. Not applicable. 3.1.7 Marking and identification. Not applicable. 3.1.8 Soldering. Not applicable. 3.1.9 Welding. Applicable. 3.1.10 Printed wiring. Not applicable. 3.2 Design and Construction. Applicable except as follows. 2 Provided by IHSNot for ResaleNo rep

10、roduction or networking permitted without license from IHS-,-,-MIL-K-L777C Lt7 777770b 025bb52 L = MI L-K-8 1779C (AS) 3.2.1 Design features. Applicable except as follows. 3.2.1.1 Method of operation. Applicable. 3.2.1.2 Commercial test equipment. Not applicable. 3.2.1.2.1 Other commercial component

11、s. Not applicable. 3.2.1.3 Circuit grounds. Not applicable. 3.2.1.4 Interchangeability. Applicable. 3.2.1.5 Identification of product. Applicable. 3.2.1.6 Human factors. Applicable. 3.2.1.7 Test set generated acoustic noise. Not applicable. 3.2.1.8 Forced-liquid cooling. Not, applicable. 3.2.1.9 Spa

12、ce and weight. The maximum dimensions of the STK box shall be 24 inches by 9 inches by 10 inches. STK (including the tools) shall be 40 pounds. The maximum weight of the 3.2.1.10 Connectors. Not applicable. 3.2.1.11 Secondary electrical power. Not applicable. 3.2.1.12 Interface. The tools of Table I

13、 shall interface with the applicable test stations and WRAs. 3.2.2 Utilities. Applicable. 3.2.2.1 Electrical power. Applicable. The electrical items of the STK shall be capable of operating from 115 volt, 60 Hertz, Type I power. 3.2.2.2 Clean Air. Not applicable. 3.2.2.3 Potable water. Not applicabl

14、e. 3.2.2.4 Liquid coolant. Not applicable. 3.2.2.5 Helium. Not applicable. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-K-L777C LI7 7777706 0256653 3 W 3.2.2.6 Nitrogen. Not applicable. 3.2.2.7 Hydraulic fluid. Not applicable. 3.2.3 Service

15、conditions. 3.2.3.1 Electrical. The electrical power required for operation of STK items shall be 115 volts ac, 60 Hertz (Hz) single phase. Maximum current requirements shall be 5 amperes. 3.2.3.2 Envirnomental. Applicable, except that the commercial items shall conform to the equipment manufacturer

16、s specifications. 3.2.3.2.1 Organizational level. Not applicable. 3.2.3.2.2 Intermediate level. Applicable. 3.2.4 Maintainability. Applicable. 3.2.4.1 Mean time to repair. Got applicable, 3.2.4.2 Test points. Not applicable. 3.2.4.3 Shop replaceable assemblies (SRA). Not applicable. 3.2.4.4 Self tes

17、t capabilities. Not applicable. 3.2.5 Reliability. Not applicable. 3.2.5.1 Operating life, Applicable. 3.2.5.2 Storage life. Applicable. 3.2.5;3 Operational stability. Not applicable. 3.2.6 Electromagnetic interference (EMI). Not applicable. 3.2.7 Utilities proection. Not applicable. 3.2.7.1 Liquid

18、cooling protection. Not applicable. 3.2.7.2 Clean air protection. Not applicable. 3.2.7.3 Electrical power protecion. Electrical items in the STK shall operate with 3-wire grounding plugs. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-K-L7

19、77C Li7 = 7777906 0256654 5 . -. . - I - -3.2.8 Calibration cycle. .Not applicable. 3.3 Performance. 3.3.1 General. The STK shall consist of a tool box (Kennedy Part No. K-24 or equivalent) containing the items listed in Table I for maintaining certain weapon replaceable assemblies (WRAs) used in AN

20、/AWG-9, and portions of AN/AWM-23(V) Test Set. 3.3.2 Organizational level functional requirements. Not applicable. 3.3.3 Intermediate level functional requirements. Applicable. 3.3.4 Warm up time. Not applicable. 3.4 Detailed functional requirements. The tools listed in Table I shall be used in repa

21、iring and maintaining the WRAs tested at the various test stations specified, and for repairing and maintaining the AN/AWM- 23(V) Test Set. 3.5 Workmanship. Applicable. 3.6 Elements. See Table I. 4. Quality assurance provisions. . 4.1 Responsibility for inspection. Applicable. 4.2 General. Applicabl

22、e. 4.2.1 Classification. Applicable. 4.2.2 Individual items. Applicable. 4.2.3 In-process inspection. Applicable. 4.2.4 In-process data. Applicable. 4.2.5 Acceptance test plan. Applicable. Table II shall apply. 4.2.6 Test results. Applicable. 4.2.7 Acceptance. Applicable. 4.2.8 Utilities. Applicable

23、. 4.2.9 Configuration. Applicable. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-K-L777C 47 = 7777906 0256655 7 = 481451 481452 481710 481720 481461 481462 481001 481010 481011 481013 481014 481015 481022 MI L-K- 8 17 79C (AS) TABLE 1 LIST O

24、F SPECIAL TOOL KIT ITEMS REQUIRED FOR MAINTAINING AN/AWG-9 WRAS AND AN/AWM-23(V) ANAWG-9 IRAS MAINTAINED AT THE APPLICABLE TEST STATIONS COhTROLS- DISPLAYS- WPPLER WNUFACTURER AND PART NO. OR EQUIVALEhT Ian :REQUENO TEST. STATIOW 481031 481081 481101 481120 481601 481610 481730 NOMENCLATURE .it, Mai

25、ntenance - .emovable Contact, SC Crimping ITEM 2 Buchanan Electrical Products 615673 481042 481501 481505 481541 481560 481580 481590 493502 481039 481083 481010 481083 481039 481039 481010 481083 481039 481010 481083 481039 481010 481083 - Tool, Wire Un- mapping, LH bnual, 20126 WG Gardner/ Denver

26、Company A31478 481081 481610-2 481042 481541 481580 -_- 181720 181451 181710 181720 1 181710 1 181461 181462 481720 481710 481461 481720 481710 481461 I 481042 ! 481081 481610 481730 3 rool, Wire Un- mapping, LH Tool, Electric Gardner /Denver 481541 1 - Company 500315 481081 481010 Nose Assy, STD Bi

27、t 1 18 WG Sleeve 500108 504908 i8640 26495 26245 500318 4.1 4.1.1 4.1.2 4.1.3 4.1.4 - 4.2 4:2.1 4.2.2 4.3 4.3.1 4.3.2 - 5 5.1 I Bit 1 20 AWG Sleeve 481081 481610 Nose Assy, Backforce Bit Sieeve 24 AWG 26263 18840 507395 30 AWG Nose Assy, Backforce Bit Sleeve 481462 507063 507100 - Hand-Tool, Temi-Po

28、int Mandrel, Termi- Point Extractor, Termi- Point AMP INC. 69525-1 694 11 -4 AMP INC. 69357-1 or-3 6 7 - Extractor, Contacl Temi-Point MlP INC. 465199-1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-K-L777C Y7 W 7777906 0256656 7 W I Extractor,

29、 P/C (Adjustable) Extractor, P/C Card (Computer) Extractor, P/C Card (Radar) Stripper, lire, Thermal Tool, Removal, IF! Dome Kit, aoresight .Assembly Nrench, Allen, Special Tool, Cap Securing Exrracror, Lead Tool, Hire, unwrapping, !anual I 19 Wrench, Bristol I y- 1 Card Puller 11 I Socket, Hex Sit

30、Card Puller Tool, lire, Unwrapping, LH, Manual MI L-K- 8 17 79C (AS) TABLE I (Contd.) BIANUFACTRER AVD PART KO. OR EQUIVALENT Flotron. Inc. 6126-413 Flotron. Inc. 6126-452 Control Data 16805400 or 69267000 corp. HAC 3229133 Kinerics Corp. XV- HAC 3129106 HAC 3111320 HAC 5229107 HAC 1019146S (Xewport

31、 Beach) Tech Devices CO. 81-1-60 Gardner/Denver Company 505244 Bristol Co. SO48-4 HAC 5282248 HAC 5282246 HAC 3282245 Gardner/Oenver Company 505064 AN/WG-9 WRAS MAINTAIIED AT ME APPLICMLB TEST STATIONS 481081 481720 431010 481042 481730 481710 481039 481610 1 481461 1 481083 1 1 - See 6.4 for .W/AIV

32、G-9 IRA and .LVAlW-23(V) lomenclanire 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- K- 8 17 79C (AS) TABLE II ACCEPTANCE TEST PLAN FOR SPECIAL TOOL KIT TK-222 ( ) /AwM-23 (V) 1.0 TEST OBJECTIVE. To demonstrate that the material, work- manshi

33、p and mechanical interchangeability requirements of 3.1, 3.5 and 3.2.1.4 respectively have been met. 2.0 TEST CONDITIONS (None applicable) 3.0 TESTS. Inspect each item of the special tool kit for con- formance to drawing 493601-1XX. 8 Provided by IHSNot for ResaleNo reproduction or networking permit

34、ted without license from IHS-,-,-MIL-K-81779C (AS) 4.3 Tests. 4.3.1 Electrical and electronic items - operational run-in test. Not applicable. 4.3.2 Mechanical items. Applicable. 4.4 Environmental test conditions. Applicable. 4.5 Test location. Applicable. 4.6 Acceptance schedule. Appl 4.7 Test proc

35、edures. Applicab 4.8 Rejection and retest. App 5. PREPARATION FOR DELIVERY cab1 e. e. icable. 5.1 General. Applicable. 6. NOTES 6.1 Intended use. The STK is intended for use at the intermediate level for testing and maintaining various AN/AWG-9 WRAs and AN/AWM-23 (V) units, 6.2 Ordering data. Applic

36、able. 6.3 Definitions. Applicable. 6.4 Nomenclature cross reference. The nomenclature of the AN/AWG-9 WRAs and the AN/AVM-23(V) items specified in Table I is listed in Table III for reference only. 6.5 Liquid cooler. Not applicable. 6.6 Use of this specification. This specification is a detail speci

37、fi- cation which uses MIL-T-81734(AS) as a general specification. Where the corresponding paragraphs of MIL-K-81779(AS) are the same as MIL-T-81734(AS) the word llapplicablell is used in this specification. When the term “not applicable“ is used in thls specification, it means that the corresponding

38、 paragraph requirements of MIL-T-81734(AS) are not required to be met (see 6.6 Of MIL-T-81734(AS). 6.7 Abbreviations and acronyms. Applicable. In addition, the following shall apply: 9 -f Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- tem 1 2 3 4 5

39、 6 7 8 9 - .o .1 .2 .3 .4 .5 .6 .7 TABLE III AN/AWG-9 WRA AND AN/AWM-23 (V) NOMENCLATURE Unit No. 481001 481010 481011 481013 481014 481015 481022 481031 481039 481042 481081 481083 481101 481120 481451 481452 481461 Nomenclature Oscillator, Radio Frequency O-1633( )/AWG-9 Synchronizer-Transmitter S

40、N-487 ( ) /AWG-9 Transmitter, Radar T-1224( )/AWG-9 Power Supply PP-6770( ) /AWG-9 Power Supply PP-6771( ) /AWG-9 Power Supply PP-6772 ( ) /AWG-9 Receiver, Radar R-1785 ( ) /AWG-9 Antenna AS-2764 ( ) /AWG-9 Converter, Signal Data CV-2950( )/AWG-9 and CV-3225 ( )/AWG-9 Filter-Multiplexer F-1331( )/AW

41、G-9 Control, Antenna-Test C-9038 ( ) /AWG-9 and C-10036( )/AWG-9 Converter, Signal Data CV-2946( )/AWG-9 CV-3224( ) /AWG-9 and CV-3366( ) /AWG-9 Receiver, Infrared R-1786( )/AWG-9 Processor, Data CV-2947( )/AWG-9 Computer, Digital CP-1159( )/AWG-9 Memory Unit MLI-588 ( ) /AWG-9 Processor, Data CV-31

42、51( ) /AWG-9 and CV-3165 ( ) /AWG-9 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-K-L777C 47 W 797790b 025bbb0 O W :tem 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Unit No. 481462 481501 481505 481541 481560 481580 481590 481601 48

43、1610 481710 481720 481730 481990 493150 493250 493350 493400 493457 MIL 4-8 1779C (AS) TABLE IIT (Continued) Nomenclature Power Supply-Storer PP-6776 ( ) /AWG-9 Control, Sensor C-9035 ( ) /AWG-9 Control, Computer C-9036( )/ANG-9 Display, Detail Data IP-1111( )/AWG-9, IP-1173( )/AWG-9 and IR-1185( )/

44、AWG-9 -Control, Sensor C-9037( )/AWG-9 Display, Tactical IP-1110( )/AWG-9 Recorder, Mission Data KF-21( ) and KF-22( ) Power Supply PP-6773 ( ) /AWG-9 Power Supply PP-6774 ( )/AWG-9 Converter, Signal Data CV-3152 ( ) /AWG-9 Contro, Logic- Timing C-9506( )/Ait!G-9 Power Supply PP-7010( )/AWG-9 and PP

45、-7042( )/ AWG-9 Rack, Electrical Equipment K-4433( ) /AViG-9 Test Station, Radio Frequency 05-213( )/AWM- Test Station, Controls-Displays-Doppler Filter 23 (VI OJ -214 ( ) /AWM-2 3 (V) Test Station, Low Frequency 05-2151 )/AWM-23(V) and 05-379( )/AWM-23(V) Test Station, Computer 05-216( )/AWM-23(V)

46、Test Station, Module 05-217( )/AWM-23(V) and OJ-378( )/AVM-23(V) 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-K-L779C LI9 W 9999906 0256663 2 Item Unit No. TABLE III (Continued) Nomencl ature 36 37 493502 Test Set, Missile Auxiliaries TS-34

47、79( )/ AWM- 2 3 (V) 493601 Kit, Tool, Special TK-222( )/AWM-23(V) I 1 I L HAC Hughes Aircraft Company STK Special Tool Kit 6.8 Convenience outlet power. Not applicable. 6.9 Changes from previous issue are not marked. Custodian: Navy-AS 12 * U.S. GOVERNMENT PRINTING OFFICE: 1978 - 703-122/1868 Preparing Activity: Navy - AS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-