NAVY MIL-G-81937 A (1)-2002 GREASE INSTRUMENT ULTRA-CLEAN METRIC《公制的超洁净文书润滑脂》.pdf

《NAVY MIL-G-81937 A (1)-2002 GREASE INSTRUMENT ULTRA-CLEAN METRIC《公制的超洁净文书润滑脂》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-G-81937 A (1)-2002 GREASE INSTRUMENT ULTRA-CLEAN METRIC《公制的超洁净文书润滑脂》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、METRICMIL-G-81937AAMENDMENT 131 JULY 2002MILITARY SPECIFICATIONGREASE, INSTRUMENT, ULTRA-CLEAN, METRICThis amendment forms a part of Military Specification MIL-G-81937A, dated 27December 1984, and is approved for use by all Departments and Agencies of the Department ofDefense.PAGE 33.1 Delete and su

2、bstitute; “First article. When specified (see 6.2), a sample shall besubjected to first article inspection in accordance with 4.1.”4.1 Delete and substitute;“4.1 Classification of inspections. The inspection requirements specified hereinare classified as follow:a. First article inspection (see 4.2 )

3、b. Conformance inspection (see 4.4).”4.2 Delete and substitute; “4.2 First article inspection. The first article inspection shallconsist of all inspections and tests to assure compliance with all the requirements for the physicalproperties specified in Table I when tested in accordance with the insp

4、ection methods specifiedin Table II and 4.6.3 through 4.6.3.2”Delete “4.3 Qualification inspection.AMSC/NA 1 of 2 FSC 9150DISTRIBUTION STATEMENT A: Approved for public release, distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

5、-MIL-G-81937AAMENDMENT 1PAGE 4Delete: “4.3.1 Qualification inspection sample.”Delete: “4.3.2 Test reports.”Delete: “4.3.3 Retention of qualification.”4.4 Change: “Quality conformance inspection.” to “Conformance inspection.”PAGE 86.2.1 Acquisition requirements. add “g. First article inspection (see

6、3.1)” and “h. Testreports (see 3.1).”Delete: “6.3 Qualification.”Delete: “6.3.1 Qualification information.”PAGE 9Custodians: Preparing activity:Army AT Navy ASNavy ASAir Force 68 (Project 9150-1276)Reviewer:Army MINavy SHAir Force 11, 99DLA GS, PSPAGE 12Change TABLE III title to, “Conformance tests.”2 of 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-