NAVY MIL-G-18014 B (1)-1968 GRATINGS METAL BAR TYPE FLOORING NAVAL SHIPBOARD《海军军舰上用的条状金属铺地箅子板》.pdf

《NAVY MIL-G-18014 B (1)-1968 GRATINGS METAL BAR TYPE FLOORING NAVAL SHIPBOARD《海军军舰上用的条状金属铺地箅子板》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-G-18014 B (1)-1968 GRATINGS METAL BAR TYPE FLOORING NAVAL SHIPBOARD《海军军舰上用的条状金属铺地箅子板》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-G-l8014B(SHIPS) AMENDMENT-1 12 February 1968 MILITARY SPfClFlCATION GRATINGS, METAL, BARTYPE FLOORING, NAVAL SHIPBOARD This amendment forms a part of Military Specification MIL-G-l80141(StIIPS), dated 15 March 1967. Page 1 and 2, paragraph 2.1: Delete and substitute: “2.1 The following documents

2、 of the issue in effect on date of invitation for bids or request for proposal, form a part of the specification to the extent specified herein. SPECIFICATIONS QQ-A-200/5 - QQ-A-200/6 - QQ-A-200/7 - QQ-A-200/8 - QQ-A- 20019 - QQ-A-225/7 - QQ-A-225/8 - QQ-A- 2SQ/6 - QQ-A-ZSO/? - QQ-A-250/8 - QQ-A-250

3、/9 - QQ-A-250/10 - QQ-A-250/11 - STANDARDS MILITARY MIL-STD-129 - MIL-STD-163 - FEDERAL QQ-A-200/4 - Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, 5083. Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, Aluminum Alloy B

4、ar, Rod, Shapes, Tube, and Wire, Extruded, Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, Aluminum Alloy Bar, Rod, Shapes, Tube, and Wire, Extruded, Aluminum Alloy Bar, Rod, and Wire; Rollod, Drawn, or,Cold Aluminum Alloy Bar, Rod, Wire, and Special Shapes; Rolled, Aluminum Alloy 5083, P

5、late and Sheet. Aluminum Alloy 5086, Plate and Sheet. Aluminum Alloy 5052, Plate and Sheet. Aluminum Alloy 5456, Plate and Sheet. Aluminum Alloy 5454, Plate and Sheet. Aluminum Alloy 6061, Plate and Sheet. 5086. 5454. 5456. and Structural, Shapes, 6061. 6063. Finished, 5052. Drawn, or Cold, Finished

6、, 6061. Marking for Shipment and Storage. Steel Mill Products Preparation for Shipment and Storage. (Copies of specifications, standards, drawings, and publications required by suppliers activity or as directed by the contracting officer.) in connection with specific procurement functions should be

7、obtained from the procuring “2.2 Other publications. The following documents form a part of this specification to the extent specified hereln. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. AMERICAN SOCIETY FOR TESTING AND MATERIAL

8、S (ASTM) A 153 - Zinc Coating (Hot Dip) on Iron and Steel Hardware. (Application for copies should be!a?dressed to the American Society or Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103.) (Technical society and technical association specifications and standards are gener-

9、ally available for reference from libraries. They are also distributed among technical groups and using Federal agencies.)“ SC 5670 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-18014B( SHIPS) AMENDMENT-1 Page 2, paragraph 3.3.1, line 1: Afte

10、r “flush topped“ insert It(5: ,31,1), Page 2: Add new paragraph 3.3.1.1: “3.3.1.1 Gratings having cross bars which are not flush with the top of the bearing bars are acceptable, provided the top edges of the bearing bars are serrated to give the necessary skid resistance in the direction of the bear

11、ing bars.“ Page 3, paragraph 3.4: Delete and substitute: “3.4 Dimensions. The depth of the bearing bars shall be 1 inch, (included depth of serrations, when present) within the tolerance specified in 3.3.3. The depth of cross bars or reticuline bars shall not exceed 1 inch.“ Page 3; paragraph 3.6, line 2: Delete “MIL-Z-17871“ and substitute “A 153“. Page 5, paragraph 4.3.4, line 1: After “samplett insert “zinc coated“. Preparing activity: 1- Navy - SH (Project 5670-N0020) * Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-