NAVY MIL-F-22963 B-1973 FILTER AIR ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS《环境控制系统功率供应静电的(沉淀剂)空气过滤器》.pdf

《NAVY MIL-F-22963 B-1973 FILTER AIR ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS《环境控制系统功率供应静电的(沉淀剂)空气过滤器》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-F-22963 B-1973 FILTER AIR ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS《环境控制系统功率供应静电的(沉淀剂)空气过滤器》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、I NIL-F-229638 (SUIPS) 21 Deconibcr 1973 - MIL+-22963A (SliIPS) 14 June 1962 (See 6.0 IILITARY SPLCIICAlIO FILTU, AIR, ESlAlIC (PRLCIPITiiTOR) NIT11 POWKR SUPPLY FOR tNIRtl!EI(TAL CONTROL SYSTEHS mis SpCifiC8tiOn is approved for use by a11 Departrants and Agoncica of the Departeent of Dafmn. 1. BCOP

2、E . miis apecification covers tlie module and tlie wash-in-place electroatatic pr Shipboard Elachinery, Wipmont NIL-E-917 - Electric Power Equipment, Basic Requiremanta (Naval Shipboard HILITARY and systcns, Hcquiremcnts For. U5e MIL-C-2036 - Enc HIL-P-15024 - P1 MIL-P-15024/5 - MIL-E-15090 - En MIL

3、-P-15137 - Pr E MIL-P-15328 - PX MIL-P-17545 - PX - I MIL-T-55164 - Ta n II La ,osures for Clectric and Electronic Equipment, Ilaval Shipboard. kc5, Tags and Unda far Idontification of Equiparnt. lates, Identification. mel, Cquipaent, Light Gray (Formula Ilo. 11). ,visioning Technical Documentation

4、for Repair Parto for ,ectrical and Ieclianicol quipmnt (Naval Shipboard Uso). .mar (Wash) Protroatment, Blue (Formula tio, 117-6 for Metals). .mr Coating, Alkyd-Rad Lead Type, Formula No. 116 and No. 16D. minal DOard5, Molded, hrrior, Screw aad Stud Types, and isociated Accessorisa, caneral Specific

5、ation Irora FSC 4460 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-22963B (SHIPS) MILITARY MIL-STD-108 MIL-STD-167 MI L-STD-2 4 2 MIL-STD-278 MIL-STD-461 MIL-STD-46 2 MIL-STD-750 MIL-STD-1399, Definitions of and Basic Requirements for Enclosu

6、res for Electric and Electronic Equipment. Mechanical Vibrations of Shipboard Equipment. Electronic Equipment Parts Selected Standards. Fabrication Welding and Inspection3 and Casting Inspection and Repair for Machinery, Piping and Pressure Ve58elil in Ships of the United States Navy. Electromagneti

7、c Interference Characteristics Requirements for Equipment. Electromagnetic Interference characteristics Measurement8 of. Test Mthods for Semiconductor Device Section 103 - Interface Standard For Shipboard SYstenu, Electric Power, Alternatiiig Cur rest. MIL-STD-1472 - Human Engineering Design Criteri

8、a For Military Systems, Equipment and Facilities, (Copies of Specifications, standards, drawings, and publications required by suppliera in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) the tentei- Unless oth

9、erwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. 2.2 Other ublications. The following documents form a patt of this specification to AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A164-71 - Electrodeposited Coatings of Zinc on Steel. A165-7

10、1 - Electrodeposited Coatings of Cadmium on Steel. A386-71 - Zinc-Coating (Hot-Dip) on Assembled Steel Products. 86-70 - Zinc Metal (Slab Zinc). D2092-60 - Preparation of Zinc-Coated Steel Surfaces for Painting. (Application for copies should be addressed to the American Society for Testing and (Tec

11、hnical society and technical association specifications and standards are generally Materials, 1916 Race Street, Philadelphia, Pennsylvania, 19103.) available for reference from libraries. They are also distributed among technical groups and using Federal agencies.) 3. REQUIREMENTS 3.1 Qualification

12、. The type I, sizes ESPM 11 through ESPM 18 precipitators shall be products which are qualified for listing on the applicable quaiified products list at time set for opening of bids (see 4.3 and 6.3). 3.2 Sam le for first article ins ection. Prior to beginning production, one precipi- tator of t 13

13、I4 15 I 1800 3000 I 4500 18 6000 31 20 31 47 53 1 47 12 22 22 22 32 42 I I I l 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i 1 I ! # # # I I # MiItF-22963B (SPIPS) 3.4.3.2.1 Air flov (size ECPH XX). The rated air flaw in CFII for the size ESPH

14、XX pncipitator sham7 afm(z 6.1.1). 3.4.3.3 Ph sical dimensions (size ESPM 11 throu h ESPM 18). The overall dimensions of mach pncipitahmbly shall be= great= dwTwxfied in table I. 3.4.3.3.1 Ph sical dimensions (size ESPM XX). The overall physical sim ESPH XX prebr assembly s-b- specified (see 6.1.1).

15、 dimensions for the 3.4.3.4 Rousin Ttie precipitator housing ahall be constructed of steel and shall k of continuodidad construction. strangth to 8upport and maintain alinement of the assembled parts. Provisions shall be nade to pewt access for maintenance and removal of the ionizers, the collectors

16、, and MI mmn8 upon ranwwal of a side panel and the prevention of electrical shock (see 3.7). nh88 otherwise specified (see 6.1.1) the removable panel shall be located on the right hand sid. of the precipitator housing. The housing frame shall be rfgid and of adequate 3.4.3.4.1 Ri ht-hand side. The r

17、ight-hand sida of the precipitator ussambly shall k tha si 3.4.4.2 Disconnect fittin . The quick disconnect fitting shall be 1/2 inch and shall be similar to Ransen Compdel number 84x26, or equal. 3 4 4 3 Dater ent dis enser. When specified bee 6.1.1), a detergent dispenser shall k pricrc such inspe

18、ctions arc deemed neccsoary to atsurc supplies and scrviccs conform to prcscrikd rc- quirementr. in accordance w t 4.1.1 Insy?;t:b; ;y;tem. The supplier shall provido and maintain an inspection system a a ordering documcnt includcd in tiic contract or order (sce 6.1.2). 4.2 Icaintainability inspacti

19、on. Maintainability iiispcction shall be in accordancc with 4.2.1. 4.2.1 1Pintainability demonstration. Tho first production unit shall bc cxamined aftcr temting, and thc capability to maintain, disasscmllc and rcpair the unit shall bc dcnonstrated to a Govcrmnt rcprowntativc, mended toolr an with o

20、ther than expert mochanics. includo Lut not be limited to the following: Tho dcmlnstration shall bc conducted utilizing the r?ccon- Thc maintainability dcmonstration shall (a) assembly arc removable for cleaning and repair. (b) Thc modulcs of tlic type I prccipitator assembly can Lc clcancd in an ul

21、tra- sonic clcaner. (c) Full covcragc of thc ionizcr and collcctor cclls Ly tlic dctergcnt solution is aciiicvcd, and tlic adherent foreign nattcr is rcnovcd and flushed away through the drain sys tem. (d) All wiring, terminals and electrical connections of the typc I and type II precipitator asscml

22、lics and of the powcr packs arc acccssible for servicing and testing without rcquiring tlie rcmoval of a part or assembly from thc cnclosurc. Qualification tcsts shall bc conductcd on sizcs CSPI1 11 Ionizer (si, collector (8) and scrccn (6) modules of tiic typc I precipitator 4.3 Qualification tcsts

23、.i? through USkM 18 inclusve I precipitator asscmbly and its accompanying powcr pack at a laboratory satisfactory to tiAVbLC. Qualification tests shall consist of thc examination in 4.6.1 and the tests specified in 4.3.3 and 4.6.2. size ESPI1 13 and thc size ESP11 18 prccipitator asscnhlics and acco

24、mpanying power packs shall be tested as specified in 4.3.1 and 4.3.2. 4.3.1 u im act shock test. The typc I, sim CSDI1 13 prccipitator assembly and its accompanying pow,* =hock testcd on thc light-wciglit machine as prescribed for type A shock of MIL-S-901. Thc typc I, size ESPI1 18 prccipitator ass

25、cfily and its accompanying powcr pack shall IC tcstcd on thc mcdium weight macliinc as prcscribcd for type A shock of MIL-S-901, The prccipitator shall bc opcrated at ratcd voltage and currcnt during shock test. The tcsts shall be conductcd prior to tests specific4 in 4.3.2 and 4.3.3. The corrcction

26、 of damagc which may Iiavc occurrcd during shock test shall not Le performed prior to these tests. Cvidcncc of fragmcntation or missilc cffcct of parts, deformation that will cause intcrfcrcnce bctween parts or failurc to opcratc shall bc causc for rejection. 4.3.1.1 Upon completion of shock test an

27、d specificd post-shock tests, thc sample precipitator assembly and accoinpanying powcr pack shall be returned to thc supplicr ?or his examination and disposition. and acconpanying powerpacks shall bc subjected to the typc I cnvironmcntal vibration tests specified in MIL-STD-167. In addition to thcsc

28、 tcsts. the typc I, 4.3.2 Vibration tcsts. Thc typc I, size ESPI1 13 and IXiPIl 18 precipitator assen-blics 4.3.3 Performance tests. 4.3.3.1 WP smokc enetration UOI? smoke penetration o? the precipitator cscmbly shall be deterGeZlafraw plus or minus 5 pcrcent using tlic tlaval Ilescarch Laboratory (

29、NRL) E-3 smoke penetration meter. Particlc size of UOP smoke acrosol shall LIC equal CL less thhn 1.0 micrometrc. L?Application for Qualification tests shall Le made in accordancc with ?Provisions Cmverning Qualification CD-6? (see 6.3). 9 Provided by IHSNot for ResaleNo reproduction or networking p

30、ermitted without license from IHS-,-,-XItP-2296 3B (SHIPS) # # # # I # # 4.3.3.1.1 Measurement of aerosol rocedures. Heasuremcnt of aerosol penetration shall be perforired usinonmdeTrrpadiy and its accompanying power pack covered in the contract or ordcr shall Le submitted for first article inspecti

31、on. and the tests of 4.3.1, 4.3.2, 4.3.3 and 4.6.2. In addition to these tests, the type II precipitator shall bo- tested as specified in 4.4.2. and with thaxahng documents included in tlic contract or order (see 6.1.2). conducted on precipitator assemllics and accompanying powcr packs that are iden

32、tical to those which have successfully passed tlie first article tests sritliin a period of 3 years of the date of the contract or orcler. Certified reports on such first article tests shall be submitted in triplicate to thc comnd or agency concerned to substantiate the fact that the tests have been

33、 conducted and specification rcquircments met (see 6.1.2). test, thc dra%iill be supplied with tlie assembly shall Lc installcd and the spray manifold shall be checked for corrcct orientation. The air inlet and air outlet flanges shall be blanked and the insulator compartment access covcrs removcd.

34、dient temperature shall be supplied to the spray manifold at a pressura of at least 40 peig for at least 1 hour. boundaries, joints, betweon cells, into any insulator conpartmcnts or the accuniulation of water in the drain pan such that tho watcr contacts tlic collector plates. 4.3.3.4 Electromagnet

35、ic intcrfcrence. The electromagnetic interference characteristics First article inspection shall consist of the examination of 4.6.1 4.4.1 Test re Orts. The supplicr shall prcparc a first article tcst report in accord- 4.4.2 Unless otherwise specificd (soe 6.1.1), first article inspection shall not

36、be 4.4.3 Drain an test. Prior to subjecting tlie type II precipitator aoscdly to this Water at Caiie for rejection shall be water leakage through any 4.5 4.5.1 Sampling for guality conformance inspection. Lot. All precipitator assemblies and their accompanying power packs of the sm type anGize offer

37、ed for delivery at one time, shall be considered a lot for the purposa of sampling. 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-2 29638 (SIIIPS) 4.5.2 Sa lin for visual and dimensional examination. A random sample of precipi- tator u8eu1

38、btion;l test. Safety devices 4.7 Ins ection of re aration for deliver The packaging, packing and marking shall be inspectbpEa-cEnTodis document. 5. PRJ2PAATIOl.I FOR DELIVERY 5.1 Preservation, pack;ginq. ZackiEg and ma;k;ns. The requirements and levels of preservation, packaging, pac ing an mar ing

39、sha e specrficd by the procuring activity (see 6.1.1). 6. NOTES 6.1 Ordering data. 6.1.1 Procurement requirements. Procurement documents should specify the following: Title, number, and date of this specification. Type, size and capacity (see 1.2). Air flow and physical dimensions for type I, size .

40、YS requirements Removable side panel. if other than as specified (see 3.4.3.4). Connections for ductwork if other than as specified (see 3.4.3.4.3). Mounting dimensions, if other than as specified (see 3.4.3.4.4). Detergent dispenser required (see 3.4.4.3). Ai, flow and physical data requirements fo

41、r type II (see 3.4.4.5). Screens, if other than as specified (see 3.8). Repair parts required (see 3.13). Inspection system requirements (see 4.1. i). First article requirements if other than as specified (see 4.4.2). Preservation, packaging, packing and marking requirements (see 5.1). (see 1.2, 3.4

42、.3.2.1 and 3.4.3.3.1). 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-WL-P-22963B (SIIIPS) irivoking the provlsioEf-ce Procurement Regulations (ASPR) paragraph 7-104.9 n) I ui which incorporates a DD Form 1423 Contract Data Requiraents List (CDRL

43、), the foiowiag :;: :a requirements should be specified for delivery on the cited Data Iter Descriptisn (DIR) i :a wlivered in accordance with such CDRL. when the ASPR proviaion are not nvokw3, the -.-iicwiiicj data should be opecifiod for delivcry iii accordance with the contract or order. 6.1.2 Co

44、ntract :i (Copies of DIDS required ?I the contractor in connection with 8pecific procurement 1- ictrons should be obtained from the procuring activity or ae irecte by the contracting C:L;CX. Unless otherwise indicated, the issue in effect on date of invitation for bids : i-quest for proposal Navy -

45、CI1 (Project 4460-NO18 IS 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI L-F-2 2 96 3B (SHIPS ) rNOTE f /-NOTE B. /-NOTEA. 4 WIDTH - SH 10440 K)“ES : A. B. C. D. Bolt holes: 3/4-10 U1dC by 1 inch deep. Provide bolt holes on centerline for sizes 13, 15, 16, 17 and 18. Mounting bars on top and bottom - 2 inches wide by 1 inch thick. Dimension tolerances - 2 1/32. Figure 1 - Mounting dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-