NAVY MIL-F-15919 D-1971 FILTERS AIR ACTIVATED CARBON SUBMARINE SANITARY TANK VENT AND WATER CLOSET《潜艇卫生水柜和盥洗室空气活性碳过滤器》.pdf

《NAVY MIL-F-15919 D-1971 FILTERS AIR ACTIVATED CARBON SUBMARINE SANITARY TANK VENT AND WATER CLOSET《潜艇卫生水柜和盥洗室空气活性碳过滤器》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-F-15919 D-1971 FILTERS AIR ACTIVATED CARBON SUBMARINE SANITARY TANK VENT AND WATER CLOSET《潜艇卫生水柜和盥洗室空气活性碳过滤器》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、” MIL-F-15919DfSIIIPS) MILITARY SPECIFICATION FILTERS, AIR, ACTIVATED CARBON, SUBMARINE SANITARY TANK VENT ANU WATER CLOSET 8.tIovember 1971 . SUPERSEDING MIL-F-15919C (SHIPS) 9 July 1964 (See 6.4) 1. SCOPE sanitary tank vent and water closet service. 1.1 scope. This specification covers filters, ai

2、r, activated carbon for subnarine 1.2 Classification. Air filters shall be of the following types as specified (see 6.21: Type I - Sanitary tank vent air filter, cylindrical. Type II - Water closet space air filter, cylindrical. 2. APPLICABLE UOCW4EIJTS # 2.1 The following documents of the issue in

3、effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein. SPECIFICATIONS FEDERAL QQ-S-766 - Steel, Plates, Sheets and Strip - Corrosion Resisting. MILITARY MIL-R-900 - Rubber Gasket Haterial, 45 Durometer llardness For iloderatel

4、y MIL-1)-1000/2 - Drawings, Engineering and Associated List. MIL-L)-1000 - Drawings. Engineering and Associated List. i4IL-P-15024 - Plates, Tags and Bands for Identification of Equipment. MIL-P-15024/5 - Plates, Identification. IIIL-R-20092 - Rubber, Sheets And hlolded Shapes, Cellular, Synthetic O

5、pen MIL-A-22985 - Adhesive, Metal Identification Plate. Cell (Foamed Latex). Low Temperature Service. in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) to the ext-pe-in. Unless otherwise indicated, the issue i

6、n effect on date of invitation for bids or request for proposal shall apply. (Copies of specifications, standards, drawings, and publications required by suppliers x 2.2 Other ublications. The following document forms a part of this specification UNIFON1 CLASSIFICAIOIJ COEGlITTCE Uniform Freight Cla

7、ssification Rules 202 Union Station, 516 West Jackson Boulevard, Chicago, Illinois 60606). (Application for copies should be addressed to the Uniform Classification Committee, (Technical society and technical association specifications and standards are generally available for reference from librari

8、es. They are also distributed among technical groups and using Federal agencies.) 3. REQUIREXENTS listed in 2.1. Any deviation from the materials in the applicable specifications shall be approved by the command or agency concerned. 3.1 Materials. Ilaterials shall be in accordance with the applicabl

9、e specifications x 3.2 Canisters . Canisters for the filters furnished under this specification shall consist of two uniformly perforated concentric cylinders constructed of 0.025 inch thick corrosion-resisting steel, conforming to class 316, condition A. 2B finish of QQ-S-766. Tne perforated area s

10、hall be not less thon 30 percent open. The circular perforations shall FSC 4460 M Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-L5929D 44 m 9999906 021Lb04 7 m - MIL-F-15919D (SHIPS) have a diameter of not more than 0.045 inch. The perforated

11、 area shall extend to 1/2 inch or less from the top edge of the cylinders. The cylinders shall be securely fastened by welding, lock seaming, riveting, or other jamming method to the base plate (see 3.4.2 and 3.5.2) as approved by the command or agency concerned. removed for renewing , the supElE is

12、 $esponsible for the performance of all inspection require- ments as specified herein. Except as otherwise specified in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspec- tion requirements specified herein, unless disapproved by th

13、e Government. The Government reserves the right to perform any of the i.nspections set forth in the Specification where requirements. such inspections are deemed necessary to assure supplies and services conform to prescribed 4.2 Samplinq for guality conformance inspection. 4.2.1 Lot. All filters of

14、 the same type offered for delivery at one time shall be considered aTt for purposes of examination. selected at ididrii-each lot of material, for the examination specified in 4.3, with lot acceptance as specified in table I. 4.2.2 Sam lin for examination. A sample number of filters of the same type

15、 shall be Table I - Sampling for examination AQL (approx.) = 1.5 percent defective. Number of Number of filters in Rejection number Acceptance number filters in lot defective defective sample - 1 to 15 - - 16 to 110 Al 1 111 to 300 15 O 1 25 O 3 2 50 ! 801 to 1300 2 1 35 I 301 to 800 1 verify confor

16、mance to all the requirements of this specification. 4.3 Examination. Each filter selected in accordance with 4.2.2, shall be examined to specification, the entire lot shall be rejected. 4.4 If any sample is found to be not in conformance with the requirements of this # 4.5 Ins ection of re aration

17、for deliver . The packaging, packing and marking shall be inspectbpna-cGndis document. 5. PREPARATION FOR DELIVERY # (The preparation for delivery requirements specified herein apply only for direct Government procurements. For the extent of applicability of the preparation for delivery requirements

18、 of referenced documents listed in section 2. see 6.3.) # 5.1 Domestic shipment and early equipment installation and for storage of onboard repair parts. 5.1.1 Filters. 5.1.1.1 Preservation and acka in . Ppreservation and packaging which may be the suppliers commercial practG,w sufficient to afford

19、adequate protection against corrosion, deterioration and physical damage during shipment from the supply source to the using activity and until early installation. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-# UIL-F-LS919D 44 999990b 02LlbOb O

20、5.1.1.2 Packins. Packing shall be accomplished in a manner which will insure accept- ance by conunon carrler at the lowest rate and will afford protection against physical or mechanical damage during direct shipment from the supply source to the using activity for early installation. The shipping co

21、ntainers or method of packing shall conform to the Uniform Freight Classification Rules or other carrier regulations, as applicable to the mode of transportation and may conform to the suppliers comercial practice. and exterior sd containers in accordance with the contractors commercial practice. Th

22、e information shall include nomenclature, federal stock number or manufacturers part number, contract or order number, contractors name and destination. 5.1.1.3 Markin . Shipment marking information shall be provided on interior packages of preservation, pa* marking for S 10 Sf 9 I ? I I W 4735 A SE

23、CTlOPl ALL MATERIAL TO BE STAINLESS STEEL UNI FIGURE I - SANITARY TANK VE 516 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-n SPACE I 8“ MA X. I SPOT WELD I“ CENTERS SPOT WELD I“ CENTERS T - %YN RUBBtR I15 I. D. X 3 TH I I “- S A-A LESS OTHERWISE S

24、PECIFIED ENT FILTER . “ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-t- Figure 2 - Wa Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ar O -.i arcloset space filter. B t W I I- O v) v) W J 2 3 J W W I- v) v) v) 5 ; v) W O I- A W c 4 H m !5 .J J a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-