NAVY MIL-E-17807 C-1991 ELEVATOR WEAPON AND CARGO ELECTROMECHANICAL (SHIPBOARD)《机电的武器和货物升降舵(军舰)》.pdf

《NAVY MIL-E-17807 C-1991 ELEVATOR WEAPON AND CARGO ELECTROMECHANICAL (SHIPBOARD)《机电的武器和货物升降舵(军舰)》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-E-17807 C-1991 ELEVATOR WEAPON AND CARGO ELECTROMECHANICAL (SHIPBOARD)《机电的武器和货物升降舵(军舰)》.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、POUND( . MIL-E-l7807C(SH) 12 February 1991 SUPERSEDING 26 June 1978 (See 6.7) MIL-E-l7807B(SH) Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Dep

2、artment of the Navy, Washington, DC 20362-5101 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. c MILITARY SPECIFICATION ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) This specification is approve

3、d for use by the Naval Sea Systems Command, Department of the Navy, and is available or use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the general requirements for the design, construction, and testing of electromechanical hoist rope o

4、perated elevators used to handle bombs, weapons, other explosives, and general cargo for shipboard applications. 1.2 Desim philosophy. The design philosophy for the electromechanical elevators is to use the latest standardized construction techniques and to achieve reliability and maintenance levels

5、 in accordance with requirements specified herein 1.3 General characteristics. Elevator is electric, winding drum type consisting of an electric motor drive and a platform lifted by means of wire rope winding on one or more drums. herein. Elevator component requirements are as specified AMSC N/A FSC

6、 3960 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-E-37807C 39 = 999990b 0473790 3 = 1.4 Classification, Electromechanical elevators covered by this specifica-

7、tion are standard platform (see 3.5), four guide rail with four-wire rope suspension, with the control method and in the weight class specified (see 6.2). Control method A - Relay logic. Control method B - Static logic. Weight class 1 - 6,000 pound rated load, Weight class 2 - 12,000 pound rated loa

8、d. Weight class 3 - 16,000 pound rated load. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications. standards, and handbooks. The following specifi- cations, standards, and handbooks form a part of this document to the extent specified herein, Unless otherwise specified, the issues

9、of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL L-S-300 FF-B-171 FF- B - 18 5 FF-B-187 FF- B - 195 FF-S-85 FF- S - 8 6 FF- S - 92 FF-S -200

10、 FF-S - 210 QQ- S - 763 RR-W- 410 TT- P- 645 GGG - P - 781 PPP-F- 320 MI LI TARY MIL- S - 901 MIL-E-917 - Sheeting and Tape, Reflective: Nonexposed Lens. - Bearings, Ball, Annular (General Purpose), - Bearing, Roller, Cylindrical; and Bearing, Roller, - Bearing, Roller, Tapered. - Bearing, Sleeve (B

11、ronze, Plain or Flanged), - Screw, Cap, Slotted and Hexagon Head. - Screw, Cap, Socket-Head. - Screw, Machinery: Slotted, Cross-Recessed or Hexagon - Setscrews: Hexagon Socket and Spline Socket, Head- - Setscrews; Square Head (Inch) and Slotted Headless - Steel Bars, Wire, Shapes, and Forgings, Corr

12、osion - Wire Rope and Strand. - Primer, Paint, Zinc-Chromate, Alkyd Type. - Puller, Mechanical Puller Attachment, Mechanical, and - Fiberboard; Corrugated and Solid, Sheet Stock Self-Aligning. Head. less. (Inch and Metric), Resisting. Puller Set, Mechanical. (Container Grade), and Cut Shapes. - Shoc

13、k Tests, H.I. (High-Impact) Shipboard Machinery, - Electric Power Equipment, Basic Requirements (Naval Equipment, and Systems, Requirements for. Shipboard Use). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-17807C 39 m 9999906 0471791 5 m M

14、IL-E-l7807C(SH) MILITARY (Continued) MIL-S - 1222 MIL-L-2105 MIL-C-2212 MIL-R-2765 MIL-M-3184 MIL-F-3541 MIL- L- 36 61 MIL-B-3990 MIL-C-5015 MIL-B-5687 MIL-S-6807 MIL-S-8805 MIL-B-8942 MIL-B-8943 MIL-B-8948 MIL-B-13506 MS 15004 MS 15005 MIL-P-15024 MIL-P-15024/5 MIL-E-15090 MIL-F-15160 DOD-P-15328 M

15、IL-S-16216 MIL-T-16315 MIL-B-16392 MIL-M-17060 MIL-C-17361 MIL-B-17380 MIL-P-17802 Studs, Bolts, Hex Cap Screws, Socket Head Cap Lubricating Oil, Gear, Multipurpose. (Metric) Controllers, Electric Motor, A.C. or D.C., and Rubber Sheet, Strip, Extruded, and Molded Shapes, Machinery: Screws and Nuts.

16、Associated Switching Devices. Synthetic, Oil Resistant. Associated Equipment and Provisioned (Repair Parts) Items: Packaging of. Deck and Vehicle Mounted with Fittings, Lubrication, General Specification for. Lampholders, Indicator Lights, Indicator-Light Housings, and Indicator - Light Lenses, Gene

17、ral Specifications for. Bearings, Roller, Needle, Airframe, Antifriction. Connectors, Electrical, Circular Threaded, AN Type, Bearings, Sleeve, Washers, Thrust, Sintered, Metal General Specification for. Powder, Oil Impregnated, General Specification for. Switch, Rotary, Selector Power, General Spec

18、ifica- tion for. Switches and Switch Assemblies, Sensitive and Push (Snap Action), General Specification for. Bearings, Plain, TFE Lined, Self-Aligning. Bearings, Sleeve, Plain and Flanged, TFE Lined. Bearings, Plain, Rod End, TFE lined, Self-Aligning. Bearing, Sleeve (Steel-Backed). Fittings, Lubri

19、cation (Hydraulic) Surface Check, 1/4-28 Taper Threads, Nickel-Copper Alloy, Type IV. Fittings, Lubrication, Throat or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy Type V. Plates, Tags and Bands for Identification of Equip- ment. Plates, Identification. Enamel, Equipment, Light-Gray (Formula

20、 No. 111). Fuses: Instrument, Power, and Telephone. Primer (Wash), Pretreatment (Formula No. 117 for Steel Plate, Alloy, Structural, High Yield Strength Transformers, Power, Step-Down (Miscellaneous, Brakes, Magnet, Naval Shipboard. Motors, 60-Hertz, Alternating Current, Integral- Horsepower, Shipbo

21、ard Use. Circuit Breakers, Air, Electric, Insulated Housing (Shipboard Use), General Specification for. Bearing, Roller, Thrust. Padlocks and Padlock Sets, Low Security, Key Metals). (Metric) (HY-80 and HY-100). Naval Shipboard Use). Operated, Regular (Open) shackle. 3 Provided by IHSNot for ResaleN

22、o reproduction or networking permitted without license from IHS-,-,-MIL-E-17807C MILITARY (Continued) MIL-S-18396 - MIL-L-19140 MIL-E-21981 - MIL-S-22473 MIL-S-22698 - MIL-P-23236 MIL-S-24093 - MIL-P-24441 - DOD-G-24508 MIL-C-24643 - MIL-S-24645 - DOD-C-24667 - MIL-C-24707 MIL-C-24707/1 - MIL-C-2470

23、7/5 - MIL- S - 24711 - MIL-N-25027 - MIL-R-28750 MIL-H-46855 - MIL-T-55164 - MIL-T-81714 - MIL-T-81714/7 - MIL-T-81714/10 - MIL-B-81793 - STANDARDS FEDERAL FED-STD-H28 - FED-STD-H28/2 - ! 39 9999906 0471792 7 , Switches, Meter and Control, Naval Shipboard. Lumber and Plywood, Fire-Retardant Treated.

24、 Electronics Equipment, Nomenclature, Serial Numbers and Identification Plates: Requirements for. (Single-Component). Strength and Higher Strength; Structural. Tanks. (Metric) Sealing, Locking, and Retaining Compounds: Steel Plate, Shapes and Bars, Weldable Ordinary Paint Coating Systems, Fuel and S

25、alt Water Ballast Steel Forgings, Carbon and Alloy Heat Treated. Paint Epoxy-Polyamide General Specification for, Grease, High performance, Multi-Purpose. (Metric) Cable and Cord, Electrical, Low Smoke, for Shipboard Use, General Specification for. Steel Plate, Sheet or Coil, Age-hardening Alloy, St

26、ructural, High Yield Strength (HSTA-80 and HSLA-100) I Coating System, Nonskid, for Roll or Spray Castings, Ferrous, General Specification for. Castings, Ferrous, for Machinery and Structural Castings, Ductile Iron and Austenitic Ductile Switch, Proximity, Solid State. Nut, Self-Locking, 250“F, 450“

27、F, and 800F. Relays, Solid State, General Specification for. Human Engineering Requirements for Military Terminal Boards, Molded, Barrier Screw and Stud Application. (Metric) Applications. Iron. Systems, Equipment and Facilities. Types, and Associated Accessories, General Speci- fication for. Resist

28、ant General Specification for, Blocks, Sectional, Bussing Modules, Feedthru Type, Size 20, Series I. Terminal Junction System, Rack Assembly, Track, Feedthru Type, Series I. Bearings, Ball, Annular, for Instruments and Precision Rotating Components. Terminal Junction System (TJS), Environment Termin

29、al Junction System, Terminal Junction Screw-Thread Standards for Federal Services. Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads - UN and UNR Thread Forms. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-L70

30、7C 39 H 9999906 OLt73793 9 H -, MIL-E-l7807C(SH) MILITARY MIL-STD-130 - MIL-STD-167-1 - MIL-STD-278 - MIL-STD-471 - MIL-STD-721 - MIL-STD-740-1 - MIL-STD-740-2 - MIL-STD-781 - MIL-STD-1399 - Section 300 MIL-STD-1629 - MIL-STD-45662 - Identification Marking of U.S. Military Property. Mechanical Vibra

31、tions of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited). Welding and Casting Standard. Maintainability/Verification/Demonstration Definitions of Terms for Reliability and Airborne Sound Measurements and Acceptance Criteria Structureborne Vibratory Acceleration Measurem

32、ents and Acceptance Criteria of Shipboard Equipment. Reliability Testing for Engineering Development, Interface Standard for Shipboard Systems, Section Evaluation. Maintainability. of Shipboard Equipment. Qualifcation and Production. 300, Electric Power, Alternating Current. (Metric) Procedures for

33、Performing a Failure Mode, Effects and Criticality Analysis. Calibration Systems Requirement. (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia,

34、PA 19111-5094.) 2.1.2 Other Government documents, drawings. and Dubiications. The following other Government documents, drawings, and publications form a part of this docu- ment to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWINGS NAVAL

35、 SEA SYSTEMS COMMAND (NAVSEA) 570-5225455 - 802-5773415 - 803-6397322 - 802-5773417 - 803-5000999 - 803-5959252 - 803-5959253 - 803-5959255 - 803-5959256 - 803-5959257 - 803-5959259 - Fork Truck Guards. Weapons/Cargo Elevator Slack Rope Safety Device Weapons/Cargo Elevator Platform Safety Linkage an

36、d Cargofleapons Elevator Overspeed Governor Assembly Personnel Barrier for Weapons Elevator. Hinged Hatch Piping Diagram. Horizontal Rolling Watertight Door Piping Diagram. Vertical Sliding Watertight Door (Up to Open) Piping Standard Hydraulic Power Unit, Hydraulic and Electri- Vertical Sliding Wat

37、ertight Door (Down to Open) Assembly and Details. Guide Roller System. and Details. Diagram. cal Schematics. Piping Hatch) Roll-Up Diagram. Hatch (with Operating Mechanism Above the Piping Diagram. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI

38、L-E-17B07C 39 979990b 0473794 O W j MIL-E-I7807C(SH) DRAWINGS (Continued) 804-5184155 - Liferails. 805-1916300 - Tie Down Fittings. 9000-S6501-73801 - Call Signal Station, Type ICD W.T. (Application for copies should be addressed to: Commander, Portsmouth Naval Shipyard, Naval Engineering Drawing Su

39、pport Activity Code 202.2, Portsmouth, NH 03801-5000.) DRAW1 NG S NAVAL SEA SYSTEMS COMMAND (NAVSEA) 573-6723830 - Elevator Hybrid Relay Controller - Dual Hatch. 573-6723831 - Elevator Hybrid Relay Controller - Single Hatch. 573-6723832 - Elevator Hybrid Relay Controller - No Hatch. (Application for

40、 copies should be addressed to: Commander, Naval Sea Systems Command, Code 56W4, Washington, DC 20362-5101.) PUBLICATIONS NAVAL SEA SYSTEMS COMMAND (NAVSEA) 0900-LP-008-2010 - Instruction for Design and Care of Wire Rope Installations. (Application for copies should be addressed to the Standardizati

41、on Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise Specified, the issues of the documents which are DOD adopted are those listed

42、in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA) 390.03 - Gear Handbook Gear Classification, Materials

43、 and Measuring Methods for Bevel, Hypoid, Fine Pitch Wormgearing and Racks Only as Unassembled Gears, (Application for copies should be addressed to the American Gear Manufac- turers Association, Inc., 1500 King St., Suite 201, Alexandria, VA 22314.) AMERICAN IRON AND STEEL INSTITUTE (AISI) Steel Pr

44、oducts Manual (Application for copies should be addressed to the American Iron and Steel Institute, 1133 15th St., N.W., Suite 300, Washington, DC 20005.) AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) A17.1 - Safety Code for Elevators and Escalators. B46.1 - Surface Texture (Surface Roughness, Wavine

45、ss, and Lay). (DoD adopted) (Application for copies should be addressed to the American National Standards Institute, 1430 Broadway, New York, NY 10018.) 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-17807C 39 9999706 OLl73775 2 m _ MIL-E-l

46、7807C(SH) AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) SEC III - Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Power Plant Components. (Application for copies should be addressed to the American Society of Mechanical Engineers, 345 East 47th St. New York, NY 1001

47、7.) AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A 216 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High Temperature Service. (DoD adopted) Martensitic, for Pressure-Containing and Other Applica- tions, for Low Temperature Service. Zinc on Iron and Steel

48、. Systems, Equipment and Facilities. A 757 - Standard Specification for Steel Castings, Ferritic and B 633 - Standard Specification for Electrodeposited Coatings of F 1166 - Standard Practice for Human Engineering Design for Marine (DoD adopted) (Application for copies should be addressed to the Ame

49、rican Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) STEEL STRUCTURES PAINTING COUNCIL (SSPC) SP10 - Near-White Blast Cleaning. (Application for copies should be addressed to the Steel Structures Painting Council, 4400 Fifth Avenue, Pittsburgh, PA 15213.) - (Non-Government standards and other publications are normally available from These documents also the organizations that prepare or