NAVY MIL-DTL-24643 49 F-2009 CABLE ELECTRICAL -20 DEGREE C TO +90 DEGREE C 1000 VOLTS TYPE LSTNW《LSTNW型1000 V -20 ℃~+90 ℃电缆》.pdf

《NAVY MIL-DTL-24643 49 F-2009 CABLE ELECTRICAL -20 DEGREE C TO +90 DEGREE C 1000 VOLTS TYPE LSTNW《LSTNW型1000 V -20 ℃~+90 ℃电缆》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-DTL-24643 49 F-2009 CABLE ELECTRICAL -20 DEGREE C TO +90 DEGREE C 1000 VOLTS TYPE LSTNW《LSTNW型1000 V -20 ℃~+90 ℃电缆》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 INCH-POUND MIL-DTL-24643/49F 1 October 2009 SUPERSEDING MIL-DTL-24643/49E 22 August 2002 DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +90 C, 1000 VOLTS, TYPE LSTNW This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acq

2、uiring the product described herein shall consist of this specification sheet and MIL-DTL-24643. Construction, Non-Watertight First - Copper conductor, coated or uncoated (see table I for size). Second - Separator may be used at manufacturers option where required to provide free-stripping insulatio

3、n. Third - Thermoset insulation (see table I for thickness). Standard identification code shall be applied by Method 1 or Method 3. If identification Method 1 is used, the insulation color shall be black. Fourth - Three conductors cabled together with a lay in accordance with 3.4.4 of MIL-DTL-24643.

4、 Fillers may be used as necessary to form a firm well-rounded assembly. Fifth - An optional binder. Sixth - Cross-linked polyolefin jacket (see table I for thickness). AMSC N/A FSC 6145 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24643/49

5、F TABLE I. Details. Overall diameter Military part no. M24643/49 Type and size AWG conductor size Insulation thickness min. avg. (inch) Cable jacket thickness min. avg. (inch) min. (inch) max. (inch) -01UN LSTNW-3 16 (Class B) 0.030 0.040 0.380 0.411 -02UN LSTNW-4 14 (Class B) 0.030 0.040 0.415 0.44

6、9 -03UN LSTNW-9 10 (Class B) 0.030 0.050 0.578 0.625 -04UN LSTNW-14 9 (Class B) 0.045 0.050 0.620 0.670 -05UN LSTNW-23 7 (Class B) 0.045 0.055 0.703 0.760 -06UN LSTNW-50 3 (Class C) 0.045 0.060 0.869 0.969 -07UN LSTNW-75 1 (Class C) 0.055 0.070 1.048 1.134 -08UN LSTNW-100 0 (Class D) 0.055 0.075 1.1

7、71 1.266 -09UN LSTNW-150 000 (Class D) 0.055 0.075 1.401 1.515 -10UN LSTNW-200 0000 (Class D) 0.055 .075 1.555 1.669 -11UN LSTNW-300 300 MCM (Class D) 0.055 .090 1.843 1.957 -12UN LSTNW-400 400 (127) Navy std 0.055 .090 2.089 2.203 -13UN LSTNW-30 30 (19) 0.045 0.055 0.725 0.775 TABLE II. Electrical

8、details. Type and size Conductor resistance (ohms) Insulation resistance (megohms) Voltage withstand min. (volts) Accelerated service loading current (amperes) LSTNW-3 4.3 6000 4000 NA LSTNW-4 2.68 5000 4000 NA LSTNW-9 1.08 3800 4000 NA LSTNW-14 0.859 4400 5500 90 LSTNW-23 0.543 3700 5500 115 LSTNW-

9、30 0.26 3000 5500 145 LSTNW-50 0.21 2600 5500 185 LSTNW-75 0.134 2600 7000 250 LSTNW-100 0.106 2400 7000 295 LSTNW-150 0.0674 1800 7000 400 LSTNW-200 0.053 1500 7000 525 LSTNW-300 0.0377 1200 7000 600 LSTNW-400 0.0273 1000 7000 8002 Provided by IHSNot for ResaleNo reproduction or networking permitte

10、d without license from IHS-,-,-MIL-DTL-24643/49F REQUIREMENTS: Qualification required. INSPECTION: Basic Electricals: Conductor resistance (ohms/1000 feet at 25 C, max.) See table II Voltage withstand (volts, root mean square, min.) Conductor to conductor See table II Insulation resistance (megohms/

11、1000 feet, min.) Conductor to conductor See table II Conductor continuity No failure Group A: Visual and dimensional No failure Group B: Cold bending cable No failure Thermoset proof test (percent, max.) Insulation 50 Jacket (when tested at 200 C) 50 Physicals (unaged) Insulation (extruded) Tensile

12、strength (lb/in2, min.) 700 Elongation (percent, min.) 150 Jacket (cable) Tensile strength (lb/in2, min.) 1300 Elongation (percent, min.) 160 Tear (lb/in thickness, min.) 35 Group C: Physicals (aged) air oven Insulation (extruded) Tensile strength (percent of unaged, min.) 75 Elongation (percent of

13、unaged, min.) 75 Jacket (cable) Tensile strength (percent of unaged, min.) 60 Elongation (percent of unaged, min.) 60 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24643/49F Permanence of printing (insulation), Method 1 only (cycles, min.

14、) 25 Permanence of printing (jacket) (cycles, min.) 125 Heat distortion (percent of unaged, max.) 30 Shrinkage No failure Group D: Flame propagation (cable) No failure Qualification Inspection: Qualification inspection shall include basic electricals; groups A, B, C, and D; plus the following: Accel

15、erated service, Sizes 14 and larger (see table II for load current) No failure Aging and compatibility (cable) (1255 C) No failure Abrasion resistance (jacket) (scrapes, min.) 75 Acid gas equivalent (percent, max.) Jacket 2 Fillers 2 Insulation 18Halogen content (percent, max.) Jacket 0.2 Fillers 0.

16、2Insulation 0.2 Immersion (jacket) Tensile strength (percent of unaged, min.) 50 Elongation (percent of unaged, min.) 50 Smoke index (max.) Jacket 25 Fillers 45Insulation 45 Toxicity index (max.) Jacket 5 Fillers 5Insulation 1.5Durometer (jacket) - Type A (hardness, min.) 80 Weathering (jacket) No f

17、ailure Electrical moisture absorption No failure 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24643/49F 5 UNIT ORDERING LENGTHS: Type Size Feet (nominal) LSTNW 3 2500 LSTNW 4, 9, and 14 2000 LSTNW 23 1500 LSTNW 50 and 150 1000 CHANGES FR

18、OM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army MI Navy SH Navy SH (Project 6145-2008-053) Review Activities: Army AR, AV, CR Navy CG, EC DLA CC NOTE: The

19、 activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-