NAVY MIL-DTL-24231 13 E-2013 CONNECTOR RECEPTACLE MULTI-PIN TYPE V SEVEN- AND NINE- CONDUCTOR.pdf

《NAVY MIL-DTL-24231 13 E-2013 CONNECTOR RECEPTACLE MULTI-PIN TYPE V SEVEN- AND NINE- CONDUCTOR.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-DTL-24231 13 E-2013 CONNECTOR RECEPTACLE MULTI-PIN TYPE V SEVEN- AND NINE- CONDUCTOR.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5935 INCH-POUND MIL-DTL-24231/13E(SH) 26 April 2013 SUPERSEDING MIL-C-24231/13D(SH) 15 May 1987 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, MULTI-PIN, TYPE V, SEVEN- AND NINE- CONDUCTOR This specification is approved for use by the Naval Sea Systems Command and is available for us

2、e by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24231. REQUIREMENTS: 1. Dimensions and configuration: see figures 1 through 5. 2. Cable shall be Type LS2SWU-1 in accordan

3、ce with MIL-DTL-24643/33 and Type 7SS-2 and FSS-2 in accordance with MIL-DTL-915/8. 3. Specify connections, if required, for nine-pin connector. 4. All dimensions are in inches. 5. Tolerances shall be as follows, or as stated: a. Decimals 0.005 inch. b. Fractions 164 inch. c. Angular dimensions degr

4、ee. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 2 FIGURE 1. Connector, multi-pin receptacle typical. M24231 /13- 001 7- CONDUC TOR - SYM NO . 7 37 .1M24231 /13- 002 7- CONDUC TOR FOR M SS - 6 OR7SS- 2 CABLE - SYM NO. 737.6M2

5、4231 /13- 003 7- CONDUC TOR FOR FS S- 2 CABLE - SYM NO . 7 37 .9M24231 /13- 004 9- CONDUC TOR FOR SH IELD ED C AB LERCPT,ASS YASSE MBLY , INSERT, MOLD ED ( 7-CO ND) M2423 1/ 7- 01 0ASSE MBLY , INSERT, MOLD ED ( 7-CO ND) M24231 /1 3- 02 0F O R 7 S S - 2 C A B L EASSE MBLY , INSERT, MOLD ED ( 7-CO ND)

6、 M24231 /1 3- 03 0FOR SHIELDE D CABLEASSE MBLY , INSERT, MOLD ED ( 9-CO ND) M24231 /1 3- 04 06879134FIGURE 1. Con ne ctor, multi-pin rece ptacle - typical .RING, RETA ININGM24231 /7- 04 118GASK ET, O- RINGSAE- AS2877 5- 22 012NYLO N INSER TM24231 /5- 07 710GASK ET, O- RINGSAE- AS2877 5- 21 311PIN, G

7、UID EM24 231 /12-01 213BODY , RCPT ,M24 231 /13-01 05CAP ,M24 231 /13-01 1152Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 3 FIGURE 2. Receptacle, body M24231/13-010. FIG UR E 2. R ec ept ac le, bo dy - M24 23 1/1 3-0 10 . 573

8、21815160.4 370.5 002113232132R1.1 891.1 851.2 041.2 971.4 011.6 171.6 13+0 .004-0.000323018316320.7 8129322.2 190.0 64+0 .002-0.002182-12U N-2A0 .12 0 HOLE0.1 87 D EEP. DON OT PEN ETR ATE.+0 .000-0.005AA0.6 020.0 51 RD ET AIL A- 2+0 .001-0.001D ET AIL A- 130300.0 25+0 .002-0.002SE E D ET AI L A- 2VI

9、E W A -A320.0 620.0 460.0 46R* SE E D ETAIL A- 1781.4 24+0 .002-0.00211116PIN, GUIDEWELD.125ALL OVEREXC EPT AS SHO WN.5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 4 FIGURE 3. Cap M24231/13-011. F IG UR E 3. C ap - M 24 23 1

10、/ 13 -011.4 53818 1 .62 5+ 0 .00 2-0 .00 21 5332182122 -12 U N- 2B0 .5 000 .1 5611160 .4 06U ND E RC U T TOR OO T O F TH RE AD15321 25A LL OV E R EX CE PTA S S H OWN15 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 5 FIGURE 4.

11、Assembly, insert, molded. 0.27 00.27 0AS SE MB LY , IN SE RT,MOLDED M2 42 3 1 / 1 3 - 0 3 0SAME AS M2423 1 /1 3 -0 2 0EX CE PT P IN C ON NE CT O RSTO B E IN A CCOR DA NC EWITH M24 231/ 13- 0 3 0 T A B L E .15 F T.716316SH IE LD E DCA BL E NO . 1SH IE LD E DCA BL E NO . 2SO L DE R CO NDU CTO RSAN D S

12、H IE LD T O PI NSAS SHOWN IN T A B L E .CA BL E ,M2423 1/1 3 - 0 2 1SEE REQ T. 3 .176 7 8CO NNE CTI O NSFOR M24231 / 1 3 -0 2 0PI NNO .CO ND .CO L O RCO ND .BL AC KSH IE LD E DCA BL ENO . 1WIREPI NCO NTA CT(7 R EQ D)1612734756BL AC KBL AC KBL AC KWHIT EWHIT ESH IE L DSH IE L DSH IE LD E DCA BL ENO .

13、 2WIRE16CO NNE CTI O NSFOR M24231 / 1 3 -0 3 0PI NNO .CO ND .CO L O RCO ND .BL AC KSH IE LD E DCA BL ENO . 1WIRE1614723NOTCO NN56BL AC KBL AC KBL AC KWHIT EWHIT ESH IE L DSH IE L DSH IE LD E DCA BL ENO . 2WIRE16123456714MOL DE DEP OX YRE SI N19WIRE16AS SE MB LY , IN SE RT,MOLDED M2 42 3 1 / 1 3 - 0

14、2 0SAME AS M242 3 1 /7 -0 1 0EX CE PT A S SH OWN .732RFIG URE 4. As se mbly , ins ert , mo ld ed .6 7 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 6 FIGURE 5. Assembly, insert, molded. FIG UR E 5. A ss emb ly , ins ert , mo

15、 ld ed . 9ASSEMBLY, INSERT, MOLDED M24231/ 1 3 - 0 4 0 S A ME A S M2 4 2 3 1 / 1 3 - 0 2 0EXC EPT AS SHO WN. PIN CON FIGUR ATION SAM E AS M24 231/9-02 0.C ON NEC T I ON SHAL L BE ACC OR DAN C E W ITH OR D ERING DATA.1893452 679 Provided by IHSNot for ResaleNo reproduction or networking permitted wit

16、hout license from IHS-,-,-MIL-DTL-24231/13E(SH) 7 TABLE I. Parts list. Item no. 1/ Description 2/ Quantity for M24231/13- 3/ Material/specification Remarks 001 002 003 004 1 Connector, receptacle, 7-conductor, symbol no. 737.1 1 - See figure 1. 2 Connector, receptacle, 7-conductor, symbol no. 737.6

17、1 - See figure 1. 3 Connector, receptacle, 7-conductor, symbol no. 737.9 1 - See figure 1. 4 Connector, receptacle, 9-conductor 1 - See figure 1. 5 Body, receptacle 1 1 1 1 Ni-Cu, Class A, QQ-N-281 See figure 2. 6 Insert assembly, molded 1 See items 14, 16, 17, and 19. See figure 4. 7 Insert assembl

18、y, molded 1 See items 14, 16, 17, and 19. See figure 4. 8 Insert assembly, molded 1 See items 14, 16, 17, and 19. See figure 4. 9 Insert assembly, molded 1 See items 14, 16, 17, and 19. See figure 5. 10 Insert 1 1 1 1 M24231/5-077 See figure 1. 11 Gasket, O-ring 1 1 1 1 SAE-AS28775-213 4/ Lubricate

19、with silicone compound, SAE-AS8660; see figure 1. 12 Gasket, O-ring 1 1 1 1 SAE-AS28775-220 4/ See item 11. 13 Pin, guide 1 1 1 1 M24231/12-012 See figure 1 and figure 2. 14 Pin, contact 7 7 7 9 MIL-DTL-24231 See figure 4. 15 Cap, pressure-proof 1 1 1 1 Ni-Al-BRZ, ASTM B150/B150M 5/ See figure 3. 16

20、 Wire As required MIL-DTL-16878/36 BJE0 See figure 4. 17 Cable As required MIL-DTL-24643/33 See figure 4 and requirement 2. 18 Ring, retaining 1 1 1 1 M24231/7-041 See figure 1. 19 Epoxy resin, molded As required Cast epoxy resin compound 6 See figure 4. Provided by IHSNot for ResaleNo reproduction

21、or networking permitted without license from IHS-,-,-MIL-DTL-24231/13E(SH) 8 TABLE I. Parts list Continued. NOTES: 1/ Item numbers are the same as encircled numbers shown on figures. 2/ See applicable figure or table listed in remarks column for part numbers and dimensions. 3/ Quantity is for one co

22、mplete assembly of each size. 4/ Nitrile (Buna N); Parker Hannifin Corporation (part number N0756-75), O-ring Division, 2360 Palumbo Drive, Lexington, KY 40509, CAGE 02697, or equal. 5/ May be high impact plastic, PVC, commercial when pressure-proof cap is not specified (see requirement for pressure

23、-proof caps in MIL-DTL-24231). 6/ Arco Set 200, M.M. Reif and Co., Ivyland, PA, or PR610-TCF (Chockfast Orange), ITW Philadelphia Resins Corp., Montgomeryville, PA, or equal. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previou

24、s issue due to the extent of the changes. Preparing activity: Navy SH (Project 5935-2011-062) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-