NAVY MIL-D-81609 C (1)-1986 DETECTING SET MAGNETIC AN ASQ-81(V)《AN ASQ-81(V)磁性探测设备》.pdf

《NAVY MIL-D-81609 C (1)-1986 DETECTING SET MAGNETIC AN ASQ-81(V)《AN ASQ-81(V)磁性探测设备》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-D-81609 C (1)-1986 DETECTING SET MAGNETIC AN ASQ-81(V)《AN ASQ-81(V)磁性探测设备》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、NIL-D-LbO7C (1) SB 7777706 OL71LlO6 T fi- i F- 15- 11 MIL-D-81609C(AS) AMENDMENT 1 10 SEPTENBER i986 MILITARY SPECIFICATION DETECTING SET, MAGNETIC AN/ASQ-81(V) This amendment forms a part of MIL-D-81609C(AS), dated 23 July 1981, and is approved for use by the Naval Air Systems Command, Department o

2、f the Navy, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 *1.2, line 2: Delete weleven“ and substitute “fifteen“. PAGE 2 Delete subitems (7) and (8) in their entirety and substitute the following: “(7) Detecting Set, Magnetic AN/ASQ-81D(V)-l (inboard)

3、Unit Type Designation Appl. Paragraph - Control, Detecting Set C-6983/ASQ-8 1 (V) 3.5.1 Amplifier-Power Supply AM-4535/ASQ-81 (V) 3.5.2 Base, Shock Mount MT-3618/ASQ-81(V) 3.5.3 Detector, Magnetic DT-323D/ASQ-8 1 ( V) 3.5.4 (8) Detecting Set, Magnetic AN/ASQ-81D(V)-3 (inboard) - Unit Type Desigantio

4、n Appl. Paragraph Control, Detecting Set C-9086/ASQ-81(V) 3.501 Amplifier-Power Supply AM-4535/ASQ-81 (V) 3.5.2 Detector, Magnetic DT-323D/ASQ-8 1 (VI 3.5.4“ PAGE 3 Delete subitems (9) through (11) in their entirety and substitute the following : “(9) Detecting Set, Magnetic AN/ASQ-81A(V)-2 (Towed)

5、Unit Type Designation Appl. Paragraph - Control, Detecting Set C-9086/ASQ-81(V) 3.5.1 Amplifier-Power Supply AM-4535IASQ-81 (V) 3.502 Base, Shock Mount MT-3618/ASQ-81 (V) 3.5.3 Towed Body, Magnetic TB-623/ASQ-81 (VI 3.5.5 Reeling, Machine, Magnetic RL-305A/ASQ-81(V) 3.5.7 Detecting Control, Reeling

6、Machine C-6984/ASQ-81 (VI 3.5.6 Detector, Launching AMSC N/A FSC 5895 DISTRIBUTION STATEMENT A; Approved for public release, distribution is unlimited. PAGE 1 of 15 Licensed by Information Handling ServicesMIL-D-BLbOSC (1) 58 U 7777706 OL7L407 L = MIL-D-8 1 609C (AS 1 AMENDMENT 1 (10) Detecting Set,

7、 Magnetic AN/ASQ-81B(V)-2 (Towed) Unit - Type Designation Appl. Paragraph Control, Detecting Set C-gO86/ASQ-81(V) 3.5.1 Amplifier-Power Supply AM-4535/ASQ-81(V) 3.5.2 Base, Shock Mount MT-3618/ASQ-81 (V) 3.5.3 Towed Body, Magnetic TB-623A/ASQ-81(V) 3.5.5 Control, Reeling Machine C-6984A/ASQ-81(V) 3.

8、5.6 Reeling Machine, Magnetic RL-305A/ASQ-81 (VI 3.5.7“ Detecting Detector, Launching (1 1) Detecting Set, Magnetic AN/ASQ-81B(V)-4 Unit Type Designation - Control, Detecting Set C-10557/ASQ-81 (VI Amplfier-Power Supply AM-4535/ASQ-81 (VI Base, Shock Mount MT-3618/ASQ-81 (V) Towed Body, Magnetic TB-

9、623A/ASQ-81 (V) Control, Reeling Machine C-10556/ASQ-81(V) Detecting Reeling Machine, Magnetic RL-305A/ASQ-81 (VI Detector, Launching: (Towed 1 Appl. Paragraph 3.5.7 3.5.2 3.5.3 3.5.5 3.5.6 3.5.7“ Add the following subitems: “( 12) Detecting Set, Magnetic AN/ASQ-81C(V)-2 (Towed) - Unit Type Designat

10、ion Appl, Paragraph Control, Detecting Set C-9086/ASQ-81 (VI 3.5.1 Amplifier-Power Supply AM-4535/ASQ-81 (VI 3.5.2 Base, Shock Mount MT-3618/ASQ-81(V) 3.5.3 Towed Body, Magnetic TB-623B/ASQ-8 1 ( V) 3.5.5 Control, Reeling Machine C-6984A/ASQ-81 (V 3.5.6 Detecting Reeling Machine, Magnetic RL-305A/AS

11、Q-81(V) 3-50? Detector, Launching (13) Detectinn Set. Maanetic AN/ASQ-81C(V1-4 (Towed) Unit Type Designation Appl. Paragraph Control, Detecting Set C-10557/ASQ-81B(V) 3.5.1 Base, Shock Mount MT-3618/ASQ-81(V) 3.5.3 Towed Body, Magnetic TB-623B/ASQ-81 (V) 3.5.5 3.5.6 Reeling Machine, Magnetic RL-305A

12、/ASQ-81 (V) 3.5.7 Amplifier-Power Supply AM-4535/ASQ-81 (V) 3.5.2 Detecting Control, Reeling Machine C-10556/ASQ-81 (V) . Detector, Launching ? L PAGE 2 of 15 Licensed by Information Handling ServicesMIL-D-3bOSC (3) 58 = 9999906 0373408 3 ! . MIL-D-8 1 609C ( AS AMENDMENT 1 (14) Detecting Set, Magne

13、tic AN/ASQ-81D(V)-2 (Towed) Unit Type Designation Appl. Paragraph Control, Detecting Set C-9086/ASQ-81 (V) 3.5.1 Amplifier-Power Supply AM-4535/ASQ-81 (VI 3.5.2 Base, Shock Mount MT-3618/ASQ-81 (VI 3.5.3 Towed Body, Magnetic TB-623C/ASQ-81 (V) 3.5.5 Reeling Machine, Magnetic RL-305AlASQ-81 (V) 3.5 .

14、 7“ Detecting Control, Reeling Machine C-6984A/ASQ-81 (VI 3.5.6 Detector, Launching (15) Detecting Set, Magnetic AN/ASQ-81D(V)-4 (Towed) - Unit Type Designation Control, Detecting Set C-10557/ASQ-81 (VI Amplifier-Power Supply AM-4535/ASQ081 (V) Base, Shock Mount MT-3618/ASQ-81(V) Towed Body, Magneti

15、c TB-623C/ASQ-81(V) Detecting Control, Reeling Machine C-l0556/ASQ-81 (V) Reeling Machine, Magnetic RL-305A/ASQ-81(V) Detector, Launching“ PAGE 4 Appl. Paragraph 3.5.1 3.5.2 3.5.3 3.5.5 3.5.6 3.5.7 *2.1, ending with the words “to the extent specified herein:“ and substitute the following: Delete the

16、 sentence beginning with the words “issue of documents“ and issues of Documents - The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the solicitation. PAGE 5 Under

17、 “Naval Air Systems Command“ add the following“ r. “WS-6536 Process Procedures Specification and Requirements for Preparation and Soldering of.Electrica1 Connections“ Under “Standards, Military“ chan e the title of MIL-STD-415 as follows: Equipment, Design Standard for“ and substitute: delete “Test

18、Points and Test Fac H lities for Electronic Systems and Associated “Test Provisions for Electponic Systems and Associated Equipment, Design Criteria for“ PAGE 3 of15 Licensed by Information Handling ServicesMIL-D-LbO7C (2) 58 7779706 017LLi07 5 M MIL-D-81609C(AS) AMENDMENT 1 PAGE 6 Under “Standards,

19、 Military“ add the following between MIL-STD-831 and MS25212: “MIL-STD-883 Test Methods and Procedures for Microelectronics MIL-STD-965 Parts Control Program MIL-STD-2076 Unit Under Test Compatibility with Automatic Test Equipment, General Requirements for“ PAGE 7 “3.3, Add a sentence as follows: “S

20、oldering process shall be in accordance with WS-6536“. “3.3.1, Make the following changes to subparagraph “an: Line 2: a. Delete nor11 and after “AN/ASQ-81C(V)-3“ delete the “period“ and substitute a ncommatt and add nor AN/ASQ-81D(V)-3“. PAGE 8 “3.3.1, -continued, make the following: b. Delete llor

21、q and after “AN/ASQ-81C(V)-3“ delete the llperiodql and substitute a and add “or AN/ASQ-81D(V)-l l. c. Delete in its entirety and substitute the following: “c. AN/ASQ-81D(V)-2, or AN/ASQ-81D(V)-4.“ 160.8 pounds for Detecting Set, Magnetic AN/ASQ-81A(V)-2, AN/ASQ-81B( V) -2, AN/ASQ-81B( V) -4, ANIASQ

22、-81 C(V) -2, AN/ASQ-81 C( V) -4 “3.3.2.1, line 2: Delete the lperiod (.ln and substitute a “comma (,ln after “MIL-STD-785“ and add the following: “Tasks 101 through 105 and 207“ Make the following changes to subparagFaph nan and “3.3.2.4, a. Delete “or“ and after “AN/ASQ-81C(V)-lV1 delete the and su

23、bstitute a llcommaw and add “AN/ASQ-81D(V)-l, and AN/ASQ-8iD(V)-3l1 b. After wAN/ASQ-81C(V)-411 delete the llperiodll and substitute a llcommatl and add “AN/ASQ-8 1 D ( V ) -2, and AN/ASQ-8 1 D ( V -4“ PAGE 4 of 15 Licensed by Information Handling ServicesMIL-D-8LbOSC (1) 58 m 9779906 017LqLO L m MI

24、L-D-81609C(AS) AMENDMENT 1 PAGE 9 “3.3.2.5, C. d. “3.3.7- 1, Make the following changes to subparagraph “cn and Under the column titled “Type Designation“ add nor“ after “DT-323C/ASQ-81(V)“ and add “DT-323D/ASQ-81(V)“ below “DT-323C/ASQ- 81 (VI1 Under the column titled “Type Designation“ add “TB-623

25、B/ASQ-81 (VI II and add “TB-623C/ASQ-81 (V) VI below “TB-623B/ASQ- 81 (V)ll after PAGE 14 After the sentence ending in the words “with MIL-STD-471 and MIL- - STD-471“ add a sentence as follows: “The maintainability program shall cover those requirements of Tasks 101, 102, 103, 104, 203, 205, and 301

26、 of MIL-STD-470.tv *3.3.7.2.1, Make the following changes to subitems “cn and “d“: “C. d. Add a new “8 Under the column titled “Type Designation“ add “orn after nDT-323C/ASQ-81(V)n and add “DT-323D/ASQ-81(V)lt below nDT-323C/ASQ- 81 (V)Ii Under the column titled “Type Designation“ add nTB-623B/ASQ-8

27、1(V)1t and add nTB-623C/ASQ-81(V)“ below “TB-623B/ASQ- 81 (V) II .I after subitem “g*. Base, Shock Mount MT-3618/ASQ-81(V) HRA.“ PAGE 17 “3.3.7.3.3, following, plus additions: Delete subitems g through k in their entirety and substitute the e- h. 3. k. m. n. P. 4. r. Vonfiguration AN/ASQ-81D( V) -1

28、AN/ASQ-8 1 D ( V) -3 AN/ASQ-81A(VI-2 AN/ASQ-81B(V)-2 AN/ASQ-81B(V)-4 AN/ASQ-B1B(V)-2 AN/ASQ-81B(V)-4 AN/ASQ-81D(V)-2 AN/ASQ-81D(V) -4 LRA Ratio 0.66 0.66 0.80 0.80 0.80 0.80 0.80 0.80 .O . 80 N-A Ration 0.97 0.97 0.80 0.80 0.80 0.80 0.80 0.80 0.80 F1 Ratio 1 .o0 1 .o0 1 .o0 1 .o0 1 .o0 1 ,o0 1 .o0 1

29、 .o0 1 .OO“ PACE 5 of 15 Licensed by Information Handling ServicesMIL-D-81609C(AS) AMENDMENT 1 *3 . 3.7.4.1 , Delete in its entirety: “*3.3.7.4.1 greatest extent practicable, the equipment shall be compatible with ATE in Compatability with automatic test equipment (ATE) - To the accordance with MIL-

30、STD-2076. shall be prepared for the procuring activity to enable the revision of the test program sets. (6.2.2)“ When specified in the contract, test data r3.3.7.4.2, Delete subitems a through f in their entirety and substitute: Unit QRA Ratio a. Control Detecting Set C-6983/ASQ-81(V) or 0.75 C-gO86

31、/ASQ-81 (V) or . C-10557/ASQ-8l(V) b. Amplifier-Power Supply c. Detector, Magnetic AM-4535/ASQ-81 (V) 0.89 DT-323/ASQ-81(V) or N.A. DT-323A/ASQ-81(V) or DT-323B/ASQ-81(V) or DT-323C/ASQ-81 (V) or DT-323D/ASQ-81(V) d. Towed Body, Magnetic Detecting TB-623/ASQ-81(V) or N.A. TB-623A/ASQ-81(V) or TB-623

32、B/ASQ-81(V) or . TB-623C/ASQ-81 (VI e. Reeling Machine, Detector Launching RL-305A/ASQ-81 (V) 0.50 C-6984/ASQ-81 (VI N.A. f. Control, Reeling Machine C- 1 0556/ASQ-81 B( VI SN-A Ratio SF1 Ratio 0.74 0.75 0.89 N.A. f N.A. 0.80 N.A. 0.94 !.A. N.A. 1 .o0 N.A.“ PAGE 18 “3.3.7.5, Delete in its entirety a

33、nd substitute: “3.3.7.5 Maintainability Demonstration. Testing to demonstrate the achievement of the maintainability requirement specified herein shall be in accordance with 4.5.“ “3.3.9, Change subitems “e (l), (2) and (3)“ as follows: “e. Input Power Voltage (1) Delete “orf1 and after “AN/ASQ-81C(

34、V)-lW add AN/ASQ-81D(VI-l, or AN/ASQ-8 1 D (V 1-3 “ (2) Delete “ortt and after “AN/ASQ-81C(V)-2“ add “, AN/ASQ-81D(VI-l, or AN/ASQ-81D(V)-2“ (3) Delete nor1t and after tlAN/ASQ-81C(V)-4tt add “, AN/ASQ-81D(V)-4“ .3t- ! PAGE 6 of 15 Licensed by Information Handling ServicesI - M SSOb OL7L4L2 5 I MIL-

35、D-BLbOSC (1) 58 MIL-D-81609C(AS) AMENDMENT 1 PAGE 19 “3 3 1 O 1 , Add a new subparagraph following 3.3.1 O. 1 . 1 as follows : 1tfi3.3.10.1.2 Towed Body, Magnetic Detecting TB-623C/ASQ-81(V) shall be subjected to the vibration levels of Curve VI12 of Figure 8 of MIL-T-5422.“ Towed Body, Magnetic Det

36、ecting TB-623C/ASQ-8l(V) - The “3.3.10.2, Delete in its entirety and substitute: tt*3.3.10.2 subjected to the temperature requirements of Class 1A equipment of Specification MIL-E-5400 except for detector, Magnetic and the Towed Body, Magnetic Detecting TB-623C/ASQ-81 (VI .“ Temperature - The equime

37、nt shall operate satisfactorily when “3.3.10.2.1, and substitute “DT-323C/ASQ-81 (VI or DT-323D/ASQ-81 (V)! In the title to this paragraph delete “or DT-323C/ASQ-81(V)- PAGE 20 *3.3.10.2.2, nDT-623B/ASQ-81(V)1t substitute “, or DT-623C/ASQ-81(V)tt In the title to this paragraph delete “or“ and after

38、 “3.3.10.3.1, Delete in its entirety and add a new paragraph as follows: T.3.10.3.1 Rate of change in altitude - The maximum rate of change in altitude for the DT-323D/ASQ-81 (V) and Towed Body TB-623/ASQ-81 (V) shall be unrestricted.“ After pragraph 3.3.10.4 add the following paragraphs: “*3.3.10.5

39、 Humidity - The equipment shall withstand the effects of humidity up to 95 percent during operating and nonoperating conditions. “3.3.10.6 condition requirements of MIL-E-5400. Explosive Conditions - The equipment shall meet the explosive *3.3.10.7 operating and nonoperating condition, exposure to s

40、and and dust particles as encountered in the operational areas of the world. Sand and Dust - The equipment shall withstand, in both “3.3.10.8 operating and nonoperating condition, exposure to a salt-sea atmoshpere . t1 Salt Atmosphere - The equipment shall withstand, in both PAGE 24 “3.5.1, Make the

41、 following changes: a. After “Type IV“ add Vn b. After “Type IV“ add “or V1 C. Delete in its entirety and substitute: PAGE 7 of 15 Licensed by Information Handling ServicesI MIL-D-BLbOSC (1) 58 W 9779906 OL7L4L3 7 W MIL-D-81609C(AS) AMENDVENT 1 “c. with IPL white lights to conform to MIL-P-7788, Cla

42、ss 1-W, Type IV or V with lamp voltage of 5 volts. The light transmitted through the white markings of the panel shall meet the chromaticity requirements for instrument and panel lighting white, type The C-10557/ASQ-81B(V) shall include a black edge lighted panel Adjustment knobs shall be grey. l(g)

43、 of MIL-C-25050.“ PAGE 25 *3.5.1.5.e, Make the following change: e. After “Magnetic Distortion RO-32/ASQn and before the ncomman add “and RO-358/ASQ-13 Multi-purpose recorder“. PAGE 27 “3.5.4, 81 (V)*I, and add “, or DT-323D/ASQ-81 (V)It before “DT-323C/ASQ-81 (V)“ In the title to this paragraph del

44、ete “or“ before “DT-323C/ASQ- PAGE 28 *3.5.5, After nTB-623B/ASQ-81 (VI“ add “, TB-623C/ASQ-81 (VIw. PAGE 29 *3.5.5.5.1, Delete in its entirety and substitute: “*3.5.5.5.1 #17038 per FED-STD-595. The housing shall be Grey, color 1F36320 per FED-STD-595. The Stabilizer Assembly part number 1524AS100

45、shall be procured separately Finish - The nose of the Towed Body shall be black, color *3.5.6, Make the following changes: a. After “Type IV“ add Itor V“. b. Delete in its entirety and substitute: Ilb. The C-10556/ASQ-81B(V) shall include a black edge lighted panel with IPL white lights to conform t

46、o MIL-P-7788, Class 1-W, Type IV or V with lamp voltage of 5 volts. Adjustment knobs shall be gray. The light transmitted through the white markings of the panel shall meet the chromaticity requirements for instrument and panel lighting white, type l(g) Of MIL-C025050.“ PAGE 31 *3.5.7.1, Line 3: Del

47、ete and after *TB-623B/ASQ-81(V)“ add “, or TB-623C/ASQ-81 (V)“. PAGE 33 *3.5.7.7, specified below:“. Under subparagraph “b“ delete “or“ before the words t1TB-623B11 and substitute “or TB-623C“ after 973-623B“ . Line 2: Delete “consist of the following:“ and substitute Itbe as I PAGE 8 of 15 License

48、d by Information Handling ServicesMIL-D-BLbOSC (I) 58 W SiOb OI7L4I4 7 MIL-D-81609C( AS) AMENDMENT 1 PAGE 34 e4.2.2, Delete all the words after “toct, including subitems “an, “b“, and “cn and substitute “those test required to demonstrate the requirements specified in 3.3.6 and 3.3.10.“ . r4.2.2.1,

49、Delete in its entirety and substitute: i “*4.2.2.1 Burn In - As a minimum each of the AN/ASQ-81(V) Modules, SRAS and WRAs shall undergo the following burn-in. If any of the WRAs are subjected to burn-in then all WRAs shall be subjected to burn-in . a. All electronic WRAs including Detector Set Control, Power Supply Amplifier, Magnetic Detector and Magnetic Detecting Towed Body shall receive as a minimum two burn-in cycles utilizing the test environment requirements of 4.2.2.1.1. b. subjected to a minimum of three cycles of thermal shock over the temperature ran