NAVY MIL-C-23092 B-1976 CEMENT NATURAL RUBBER MAGNETIC MINESWEEPING CABLE REPAIR《磁性扫雷缆索修复天然橡胶结合剂》.pdf

《NAVY MIL-C-23092 B-1976 CEMENT NATURAL RUBBER MAGNETIC MINESWEEPING CABLE REPAIR《磁性扫雷缆索修复天然橡胶结合剂》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-C-23092 B-1976 CEMENT NATURAL RUBBER MAGNETIC MINESWEEPING CABLE REPAIR《磁性扫雷缆索修复天然橡胶结合剂》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-C-23072B 80 m 7777906 0303768 3 m MIL-C-230928 (SHIPS) 26 February 1976 SUPERSEDING MIL4!-23092A(SHIPS) 1 November 1968 (See 6.3) MILITARY SPECIFICATION CEMENT, NATURAL RUBBER; MAGNETIC MINESWEEPING CABLE REPAIR # This specification is approved for use by the Naval Sea Syotcns Conmand and is a

2、vail- able for use by all Departments and Agencies of the Department of Defenoe. 1. SCOPE 1.1 This specification covers a natural rubber cement for making vulcanized and unvulcanized bonds of natural or synthetic rubber to vulcanized synthetic rubber for the repair of magnetic minesweeping cable. 2.

3、 APPLICABLE DOCUMENTS I 2.1 The following documents, of the issue in effect on data of invitation for bids or request for proposal, form a part of the specification to the extent specified herein. SPECIPICATIONS ?EDEPAL PPP-B-566 - Boxes, Folding Paperboard. PPP-B-636 - Boxes, Shipping, Fiberboard.

4、PPP-b-665 - Boxes, Paperboard, Metal Stayed (Including Stay Material). PPP-B-676 - Boxes, Setup. MIL-T-22755 - Tape, Repair, Magnetic blinesueeping Cable Sheath. MILXTARY STANDARDS FEDERAL FED-STD-601 - Rubber, Sampling and Testing. MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attr

5、ibutes. MIL-STD-129 - Marking for Shipment and Storage. NILITARY (Copies of specifications, standards, drawings, and publications required by ouppliers ia connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) # 2.2 O

6、ther ublications. The following documents form a part of this specification to the extentEiw Unless otheruise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. UNIPORH CLASSIFICATION COMMITTEE Uniform Freight Classification Rules. (Application for cop

7、ies should be addressed to the Uniform Classification Camnittee, Room 1106, 222 South Riverside Plaza, Chicago, Illinois 60606.) NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION INC., AGENT National Motor Freight Classification. (Application for copies should be addressed to the National mtor Freight Traf

8、fic Association, Inc., 1616 P Street N. W., Washington, D. C. 20036.) (Technical society and technical association specificationo and otandards are generally available for reference from libraries. and using Federal agencies.) They are also distributed among technical groups i- ?SC 8040 a, 1 Provide

9、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MIL-C-23072B 0 m 7977706 0303767 3 m MIL-C-23092B (SHIPS) . 3. REQUIREMENTS # 3.1 Material. The cement shall consist of natural rubber dissolved in a solvent. No # 3.2 Solids content. The solids content of the c

10、ement shall be not less than 15 per- reclaimed seshall be used. / cent, by wm wTexsted in accordance with 4.4.1. less than dds when tested in accordance with 4.4.2. 3.3 Viscosit . The cement shall have a viscosity of not more than 150 seconds nor 3.4 Adhesion. c 3.4.1 Initial adhesion. The adhesion

11、of the cement in both vulcanized and unvulcan- - ized repairs-smTbe not less than 15 pounds per inch (lb/in) when tested in accordance with 4.4.3. After the cement has been aged as specified in 4.4.4 and then tested in accordance with 4.4.3, the adhesion of the cement in both vulcanized and unvul- c

12、anized repairs shall be not less than 15 lb/in. c 3.4.2 Ages adhesion-. 3.5 Stabilit . The cement shall not gel or otherwise deteriorate when aged as specified in 4.4.2 4. QUALITY ASSURANCE PROVISIONS c 4.1 Res onsibilit for ins ection. Unless otherwise specified in the contract or purchase oxwlE $s

13、 fesponsible for the performance of all inspection require- ments as specified herein. Except as otherwise specified in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the

14、Government. ment reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. The Govern- 4.2 Samplinq. 4.2.1 Lot. For purposes of inspection, a lot shall consist of

15、 all cement from one 4.2.2 Sam lin for ins ection of filled containers. A random sample of filled con- production batch offered for delivery at one time. tainers shall be sefed-*- pac aging, pac ing, and marking for shipment and storage shall be in accordance with the requirements of section 5 and t

16、he documents specified therein. 4.5 Ins ection of re aration or delive . Sample packages and packs and the inspec- 5. PREPARATION FOR DELIVERY (The preparation for delivery requirements specified herein apply only or direct Government procurements.) 5.1 Packa in . Packaging shall be level A or C, as

17、 specified (see 6.2). The cement shall be fain glass containers of 4 or 8-ounce capacity or in collapsible tubes of 4 or 8-ounce capacity as specified (see 6.2). packaged in containers as follows: 5.1.1 Level A. The cement, furnished in the quantity specified (see 6.2), shall be (al Glass containers

18、. The glass container shall be of a light-resistant glass With the liner in place, -plastic screw-caps and liner type closure. the screw-cap shall not crack, split or break when applied to the container and tightened. Closure shall be tightened to the degree required to prevent loosening of the cap

19、or loss of contents. with cellulose hydrate bands or equivalent as an outer seal. shall cover the cap externally, extending well down on the neck of the glass container and slightly over the top edge of the cap. shall conform to the contour of the cap and neck of the bottle. Twelve glass containers

20、of the same capacity shall be packaged in a fiberboard box of minimum 200 pounds bursting strength conforming to PPP-B-636 class domestic. Carton design shall include partitions, liners, and top and bottom pads. Arrangement shall be at the suppliers option. (b) Colla sible tubes, The collapsible tub

21、es shall consist of a seamless, -1 body (wall) with integral shoulder and threaded neck. Tubes shall be fabricated of tin-copper alloy, tin-lead alloy, or aluminum and shall have suitable flexible characteristics and an opening which shall permit ready dispensing of the material. Tube walls shall be

22、 of uniform thickness and may be treated with an interior protective coating. An inner seal in the form of a dish shall be adhered completely to the mouth of the tube. The tubes shall be provided with a screw cap to protect the contents once the inner seal is punctured. Each tube shall be further pa

23、ckaged in a paperboard box conforming to PPP-B-566, PPP-B-665, or PPP-B-676. Twelve packaged tubes of the same capacity shall be placed in a paperboard or fiberboard box conforming to PPP-B-566, PPP-B-665, PPP-B-676, or PPP-B-636 respectively, Closure of boxes shall be in accordance with the applica

24、ble box specification or appendix thereto. The cap closures shall be provided Outer seals When dried, the band 5.1.2 Level C. The cement furnished in the quantity specified (see 6.21, shall be packaged mags containers or collapsible tubes as specified in 5.1.1 and overpacked in paperboard or fiberbo

25、ard containers in a manner to afford protection against physical damage, loss of contents, or breakage during shipment from the supply source to the first receiving activity for immediate use. The suppliers normal packaging methods may be utilized when such meets the requirements of this level. 5.2

26、Packinz. Packing shall be level A, B, or C as specified (see 6.2). 5.2.1 Level A. Rubber cement, packaged as specified in 5.1, shall be packed in fiber- board boxes conforming to PPP-B-636, class weather-resistant, Grade V with variety and style at the suppliers optJon? apecified for method V in acc

27、ordyce with the appendix to the box specification. Box closiire, waterproofing, and reinforcing shall be as 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,- MIL-C-230928 BO m 979470b 0303773 5 1 MIL-C-23092B (SHIPS) 5.2.2 Level B. Rubber cement, pack

28、aged as specified in 5.1, shall be packed in fiber- board boxes conforming to PPP-B-636 class domestic. Closure shall be in accordance with the appendix to the box specification. 5.2.3 Level C. Rubber cement, packaged as specified in 5.1, shall be packed in containers acceptable to the common carrie

29、r which will insure safe delivery at destination in a satisfactory condition at the lowest applicable rate. Containers, packing, or method of shipment shall comply with Uniform Freight and National Motor Freight Classification Rules or Regulations or other carrier rules as applicable to the mode of

30、tranrrportation. 5.3 Markin . In addition to any special marking required (see 6.2), or herein, interior package: and exterior shipping containers shall be marked in accordance with MIL-STD-129 and shall include type I Shelf-life markings. Data manufactured and expiration dates shall be included. sh

31、all be marked on two opposite sides as follows: 5.3.1 Precautionary markings. Each interior package and exterior shipping container “STORE IN A COOL DRY PLACE“ Containers of glass bottles shall be marked with a fragile label and stenciled denoting “GLASS, HANDLE WITH CARE“. 6. NOTES 6.1 Intended e.

32、Natural rubber cement is used for making vulcanized and unvulcanized bonds of natural or synthetic rubber to vulcanized synthetic rubber for the repair of magnetic minesweeping cable. 6.2 Ordering data. Procurement documents should specify: 6.2.1 Procurement requirements. (a) Title, number, and date

33、 of this specification. (b) Size container (see 5.1). (c) Levels of packaging and packing required (see 5.1 and 5.2). (d) Special marking required (see 5.3). 6.2.2 Contract &ta y. When this specification is used in a procurement invoking the data requirement c ause of the Armed Services Procurement

34、Regulations (ASPR) paragraph 7-104.9(n) and which incorporates a DD Fom 1423 Contract Data Requirements List (CDRL), the data requirements identified below will be developed as specified in the cited Data Item Description (DID) and delivered in accordance with such CDRL. When the ASPR provisions are

35、 not invoked, the data specified below shall be delivered in accordance with the contract requirements. Specification Data Applicable paragraph requirements Service DID Options (a) 4.4.5 Procedures, (b) 4.4.5 Report, test/ test SH UDI-T-2 3732 - inspection SH - UDI-T-23473 (Copies of DIDS required b

36、y the supplier in connection with specific procurement func- tions should be obtained from the procuring activity or as directed by the contracting officer. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply.) 6.3 THE MARGINS OF THIS SP

37、ECIFICATION ARE MARKED “I“ TO INDICATE WHERE CHANGES (ADDI- TIONS, MODIFICATIONS, CORRECTIONS, DELETIONS) FROM THE PREVIOUS ISSUE HAVE BEEN MADE. THIS WAS DONE AS A CONVENIENCE ONLY AND THE GOVERNMENT ASSUMES NO LIABILITY WHATSOEVER POR ANY INACCURACIES IN THESE NOTATIONS. BIDDERS AND CONTRACTORS AR

38、E CAUTIONED TO EVALUATE THE REQUIREMENTS OF THIS DOCUMENT BASED ON THE ENTIRE CONTENT IRRESPECTIVE OF THE MARGINAL NOTATIONS AhD RELATIONSHIP TO THE LAST PREVIOUS ISSUE. Preparing activity: Navy - SH (Project 8040-NO341 6 *U.S. GOVERNMENT PRINTING OFFICE: 1976-603-766/3432 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-