NAVY MIL-C-22766 (2)-1966 CONTROL CENTRAL C-3076( ) ASQ-19 AND C-6248( ) ASQ-88《C-3076( ) ASQ-19 和C-6248( ) ASQ-88控制中枢》.pdf

《NAVY MIL-C-22766 (2)-1966 CONTROL CENTRAL C-3076( ) ASQ-19 AND C-6248( ) ASQ-88《C-3076( ) ASQ-19 和C-6248( ) ASQ-88控制中枢》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-C-22766 (2)-1966 CONTROL CENTRAL C-3076( ) ASQ-19 AND C-6248( ) ASQ-88《C-3076( ) ASQ-19 和C-6248( ) ASQ-88控制中枢》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、, -I MIL-C-22766 (2) 54 9 9777906 03536119 2 9 MIL- C- 22766 (WP) Amendment02 15 January 1966 Superseding Amendment-1 15 December 1961 CONTROIS, CEHTRAL c-3076( *)/ASQ-lg AM) C-&?48( *)/ASQ-m This amendnent forms a part of Military Specification MIL-C-22766(WEP) dated 15 February 196.l and has been

2、approved by the Bureau of Nava Weapons, Department of the Navy. Title: Add “and C-&46(*)/ASQ-88“ Page 1, p8ragrap.b 1.1, first sentence: Add “and AN/ASQ-88. I Page 1: Add “1.2 that C-6246(*)/ASQ-M shall provide for an additional mode of operation (See 3.4.i.3.2(3).“ Classification - The two controls

3、 shall be identical except Page 1, paragraph 2.1, under SPECIFICAIPIONS Military: Add “-1-81036 Integrated Electronic Central AN/ASQ-88“ Page 2, paragraphs 3.1 and 3.2.1, after “IL-1-18309“: Add “or MILI-81036“ Page 2, paragraph 3.2.5.1: “3.2.5.1 Cables and Connectors - The external connectors shall

4、 be one each Bendix type FT O1 P-22-55P, FT O1 P-22-55pW, and PT O1 P-18-32P or approved equivalent mounted on pendant cables at the rear of the equipment. Delete and substitute The Length of the pendant cables shall be as follows: Plt cable 10 + 1 inch P2 cable 14 T 1 inch P3 cable 12 7 - 1 inch“ P

5、ages 2 and 3, paragraphs 3.302, 3.3.3, 3.3.4 and 303.5: Page 3, paragraph 3.4.1.1, after “AN/ASQ-lg“ (three places): Delete “of C-30(6/ASQ-19“ Add “ad AN/ASQ-88“ FSC 5841 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-KIL-C-22 66 (I P ArnenmenS - 2

6、Page 4, paragraph 3.4.1.2: substitute Delete Itthe Central Control C-3076/ASQ-19“ and “the controls“ Page 4, paragraph 3.4.1.3.2(3): Delete and substitute “(3) A rotaqy switch, three position on C-3076 and four position on -&48, for selecting the mode of operation as follows: Position 1 STBY Positio

7、n 2 Position 3 Position 4 (c-6248 only) REC (on channel selecked by (1 7-T/R (on channel selected by (1 A/A (on channel selected by (1) above) Page 5, paragraphs 3.4.1.6, 4.1 and 5.1, after “MIL-1-18309: Add lor MIEI-81036“ Page 6, paragraph 6.1: Add “md AN/ASQ-88“ Page 6, paragraphs 6.3(2) and 6.4, after MU-I-18309: Add “or MILI-81036 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-