NAVY A-A-59691-2001 SILICONE COMPOUND NATO CODE NUMBER S-736《S-736型北约条码合成聚硅酮》.pdf

《NAVY A-A-59691-2001 SILICONE COMPOUND NATO CODE NUMBER S-736《S-736型北约条码合成聚硅酮》.pdf》由会员分享，可在线阅读，更多相关《NAVY A-A-59691-2001 SILICONE COMPOUND NATO CODE NUMBER S-736《S-736型北约条码合成聚硅酮》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-59691August 10, 2001COMMERCIAL ITEM DESCRIPTIONSILICONE COMPOUNDNATO CODE NUMBER S-736The General Services Administration has authorized the use of this Commercial ItemDescription, for all federal agencies.1. Abstract. This document covers requirements for silicone compound which meets therequir

2、ements of Society of Automotive Engineers (SAE) specification SAE-AS8660 withadditional requirements as listed here. 2. Preproduction. Prior to supplying material to this specification, the supplier shall provideobjective evidence of successful completion of preproduction testing. The material shall

3、have been certified and assigned a “Limited” or “Permitted” usage category inaccordance with the Nuclear Powered Submarine Atmosphere Control Manual(NAVSEA S9510-AB-ATM-010/(U). Products previously tested and certified toNAVSEA S9510-AB-ATM-010 as “Limited” and “Permitted” satisfy the preproductionr

4、equirements of this specification unless processing or formulation changes are made.Requests for certification of materials not listed in Appendix A of NAVSEA S9510-AB-ATM-010/(U) can be made in writing to the Commander, Naval Sea Systems Command,ATTN 05L2, 1333 Isaac Hull Avenue SE, STOP 5122, Wash

5、ington Navy Yard, DC20376-5122. Contingent upon successful completion of an evaluation, NAVSEA 05L23will certify the material and include the product in Appendix A. The supplier of thematerial will cover the cost of any needed tests.3. Insolubility test method. Ethyl alcohol in accordance with A-A-5

6、9342 Grade 1 shall beused in lieu of ethyl alcohol to MIL-E-463 to determine the insolubility of the compoundsin solvents in addition to distilled water, isopropyl alcohol (TT-I-735) diluted with water to90% by weight, ethylene glycol (O-A-548), and glycerine (O-G-491).Beneficial comments (recommend

7、ations, additions, deletions) and any pertinent datawhich may be of use in improving this document should be addressed to: Commander,Naval Sea Systems Command, ATTN 05Q, 1333 Isaac Hull Avenue SE, STOP 5160,Washington Navy Yard, DC 20376-5160.AMSC N/A FSC 9320DISTRIBUTION STATEMENT A. Approved for p

8、ublic release; distribution is unlimited.NOT MEASUREMENT SENSITIVEProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-596914. Preservation packaging,labeling and marking. The silicone compound shall be premixedand unit packed. Preservation, labeling,

9、 marking and other packaging requirementsshall be as specified in the SAE-AS8660 and contract or order, except as a minimum,the following marking shall appear on the innermost container and all other containers orpackaging in prominent letters:Silicone compound per CID A-A-59691, previously MIL-S-86

10、605. Suggested sources of supply.Dow Corning Compound 4 (Manufacturer: Dow Corning Corp. South Saginaw RoadMidland, MI 48686)G-624 Silicone Dielectric Compound (Manufacturer: Novagard Silicone Compounds &Greases, 5109 Hamilton Avenue Cleveland, Ohio 44114, formerly General ElectricCompany Silicone Products Dept.)Preparing Activity:Navy SH(Project 9320-N001)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-