NAVISTAR TMS 9013-2009 Phosphate and E-coat Systems Compatibility.pdf
《NAVISTAR TMS 9013-2009 Phosphate and E-coat Systems Compatibility.pdf》由会员分享,可在线阅读,更多相关《NAVISTAR TMS 9013-2009 Phosphate and E-coat Systems Compatibility.pdf(2页珍藏版)》请在麦多课文档分享上搜索。
1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. February 2009 Page 1 of 2 NAVISTAR, INC. TMS (TRUCK MATERIAL SPECIFICATION) NUMBER
2、: TMS-9013 TITLE: Phosphate and E-coat Systems Compatibility CURRENT REV No.: 0902 DATE: February 2009 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: February 2004 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specificati
3、on may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to
4、use. Change Notice: Replaced “International Truck and Engine Corporation” with “Navistar, Inc.” per corporate directive; added CEMS B-50 requirement; editorial changes. Reference: 30-13 Keywords: phosphate; e-coat; compatibility 1.0 APPLICATION This specification covers all materials used on the cab
5、 assembly process. 2.0 SCOPE This specification covers materials that will enter the phosphate and e-coat systems. 2.1 Restricted Chemical Substances Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of the CEMS B-50 specifica
6、tion. 3.0 REFERENCE DOCUMENTS Unless otherwise specified, the latest issue of all referenced standards shall apply. The following standards, specifications and regulations are referenced in this specification. Quality System Standard ISO 9001 or TS-16949 NAVISTAR TMS-4505 NAVISTAR Manufacturing Stan
7、dard MS-D-13 NAVISTAR TMS-6815 CFR Title 29, Part 1910 NAVISTAR TMS-6900 NAVISTAR TMS-6915 NAVISTAR TMS-6917 NAVISTAR TMS-6916 NAVISTAR TMS-6928 NAVISTAR CEMS GT-24 NAVISTAR CEMS B-50 4.0 REQUIREMENTS All materials entering the phosphate and e-coat systems must pass the following tests. 4.1 Phosphat
8、e Compatibility 4.1.1 Materials are to be tested per CEMS GT-24 4.2 E-Coat Compatibility 4.2.1 Materials are to be tested in accordance with BASF E-Coat Compatibility Guidelines for New Systems. 5.0 QUALITY Color and texture of parts supplied shall match the samples originally approved. Parts shall
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVISTARTMS90132009PHOSPHATEANDECOATSYSTEMSCOMPATIBILITYPDF
链接地址:http://www.mydoc123.com/p-963706.html