NAVISTAR MPAPS VOID INDEX-2018 Voided Material Specifications.pdf

《NAVISTAR MPAPS VOID INDEX-2018 Voided Material Specifications.pdf》由会员分享，可在线阅读，更多相关《NAVISTAR MPAPS VOID INDEX-2018 Voided Material Specifications.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2018 by Navistar, Inc. APRIL 2018 Page 1 of 19 NAVISTAR, INC. Material, Parts, and Process Specifications

2、 (MPAPS) NUMBER: MPAPS VOID INDEX Former Designation: TMS-1011 (example) TITLE: Voided Material Specifications CURRENT REV No.: 1818 DATE: Apr. 2018 WRITTEN/EDITED BY: W. Cook APPROVED BY: R. Goluch SUPERSEDES: 1807- Feb. 2018 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Thi

3、s specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory lim

4、its prior to use. DOCUMENT NUMBER TITLE REPLACED BY DATE OF VOID MPAPS: VOIDED SPECIFICATIONS MPAPS A-0 Part I Section A Chemical Composition of Standard Steels- Part I Section A No Replacement August 2014 MPAPS D-7051 Decorative Electroplated Chromium Plastics MPAPS G-7051 September 2016 MPAPS G-5

5、Part I Paint Material and Finished Product Requirements Combined with MPAPS G-5 August 2014 MPAPS G-5 Pt I APPX Paint Part I Appendix Combined with MPAPS G-5 August 2014 MPAPS G-5 APPX Paint Appendix MPAPS G-8 April 2017 CEMS: VOIDED SPECIFICATIONS A-0 Pt I, Sec A Chemical Composition of Standard St

6、eels Part I, Section A North American Steels MPAPS A-0 Pt I, Sec A February 2014 A-0 Pt I Sec B Chemical Composition of Standard Steels Section B No replacement. August 2014 A-0 Part I APPX Chemical Composition of International Standard Steels - North American and Global Steels - Appendix None Febru

7、ary 2012 Table of Content Page MPAPS Material Part Type 1 Sept. 2000 7014 Vinyl Chloride Acetate Extrusions-Welting * Sept. 1988 7015 Trim Molding, Metallized * Jan. 1994 7016 Polyvinyl Chloride Extrusions (Trim) MPAPS D-7016 Aug. 2014 7017 Vinyl Metal Laminate * Feb. 1980 7018 Plastisol Sealant, Ca

8、b and Body TMS-6915 Feb. 1980 7019 Polyvinyl Chloride Plastisol Specification TMS-7013 June 1979 7020 Sound Deadening Tape Specification TMS-6917, Type II June 1979 7021 Nylon Fabric * Apr. 1987 7022 Vinyl Coated Fabric, Interior Covers TMS-7121, Type E Aug. 1994 7023 Vinyl Coated Fabric, Curtains *

9、 June 1983 7024 Vinyl Foam Headliner * Mar. 1980 7025 Asbestos-Filled Polypropylene Molding Compound AM-77392 Aug. 1979 7026 Polypropylene, Asbestos-Filled * Apr. 1981 7027 Molded Fiberglass, Cab Insulator TMS-6609 Mar. 1993 7028 Bonded Trim Composites, Interior MPAPS D-7028 Aug 2016 7029 Coiled Nyl

10、on Air Brake Tubing MPAPS F-7029 Aug 2016 7030 Painting, ABS Plastic Trim TMS-9008 Aug. 1979 7031 Sisal Reinforced Polyester Plastic AM-68621 Aug. 1979 7032 Duck Canvas * June 1995 7033 Foundation Cardboard, Seat Backing * Jan. 1994 7034 Roof and Door Trim * Mar. 1980 7035 Door Trim Panel * Mar. 198

11、0 7036 Cork Sheet Grade 1 Cork Sheet Grade 2 Cork Sheet Grade 3 Cork Sheet Grade 4 See CEMS D-18 Armstrong 9530 Armstrong 114 Armstrong 9540 Armstrong 9550 Oct. 1992 7037 Sleeper Cab Curtain * Mar. 1980 7038 Thread (Cotton) TMS-7005 Mar. 1980 7041 Non-Metallic Conduit (Loom) SAE J562 Nov. 1974 7042

12、Gaskets, Non-Metallic Group I, Class 1 and 2) Gaskets, Non-Metallic Group II) Gaskets, Non-Metallic Group III) Gaskets, Non-Metallic Group IV, Class 1) Gaskets, Non-Metallic Group IV, Class 2) CEMS D-18 Gr. 30 CEMS D-18 Gr. 20 CEMS D-18 Gr. 40 CEMS D-18 Gr. 11 CEMS D-18 Gr. 10 Apr. 1987 7043 Pressur

13、e Sensitive Cast Vinyl Film Exterior Decorative Applique (Wood Grain) * June 1991 7044 Pressed Wood Hardboard, Interior Trim SAE J1323 B4 A33 A2.3 B3 C7 F6 H8 Jan. 1994 7045 Tank, Fuel, Molded Plastic * Nov. 1982 Written and Approved by: Materials Engineering NAVISTAR, INC. Material, Part and Proces

14、s Specifications: Void Index This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2018 by Navistar, Inc. APRIL 2018 Page 16 of 19 DOCUMENT NUMBER TITLE REPLAC

15、ED BY DATE OF VOID 7046 Plastic Components - Approved Sources * Aug. 2004 7047 Plastisol, Wear Pads * Jan. 1994 7048 Vinyl Coated Fabric, Knit Backed * Sept. 1988 7049 Oil Filter Elements * Nov. 1985 7050 Sound Deadener, Asphalt Base, Corrosion Resistant TMS-4501, Type 2 Mar. 1980 7051 Decorative El

16、ectroplated Chromium - Plastics MPAPS G-7051 Aug 2016 7052 Woven or Knit Fabric, Interior Trim TMS-7113 June 1991 7053 Cab Roof Exterior Vinyl Coating * Mar. 1980 7054 Certification Label, Non-Removable * Jan. 1994 7056 Decorative Pressure Sensitive Film for Exterior Application * June 1991 7058 Pol

17、ypropylene Non-Woven, Fabric, Spun-Bonded * Jan. 1994 7059 Vinyl Coated Fabric, Knit Back * Feb. 1992 7060 Nylon Fabric, Heavy Cut Pile * Feb. 1992 7061 Vinyl Coated Fabric, Expanded Knit Back (Heavy Duty) TMS-7121, Type F Aug. 1994 7062 Vinyl Coated Fabric, Knit Back (Heavy Duty) TMS-7061 Mar. 1981

18、 7063 Vinyl Coated Fabric, Satin Back (Heavy Duty) * Sept. 1988 7064 Vinyl Coated Fabric, Twill Back * Sept. 1988 7065 Nylon Fabric, Cut Pile Carpet TMS-7126, Type F Jan. 1999 7066 Laminated Fiberboard, Head Board MPAPS D-7066 Oct. 2016 7067 Non-Woven Padding, Fiberbond MPAPS D-7067 Oct. 2016 7068 B

19、onded Polyester Fabric, Trim Backing * Jan. 1994 7069 Polypropylene Fabric, Needled, Non-Woven (Side Trim) TMS-7126, Type B1 Jan. 1999 7070 Polypropylene Fabric, Dense Cut File Carpet TMS-7126, Type D Jan. 1999 7071 Vinyl Coated Fabric, Knit Back (Door Trim) * Sept. 1988 7072 Foundation Board, Door

20、Trim MPAPS D-7072 June 2017 7073 Vinyl Coated Fabric, Non-Woven Needled Back TMS-7121, Type K Aug. 1996 7074 Black Bending Board, Glove Box * Jan. 1994 7075 Seat Pad Reinforcement, “Stabilon” * Jan. 1994 7076 Blackboard, Dash Insulator * Jan. 1994 7077 Cotton Padding, Seat Trim Filler * Jan. 1994 70

21、80 Fiberglass Reinforced Polyester Molded Plastics CEMS D-22 June 1973 7081 Polypropylene, Chemically Coupled Mineral/Glass Reinforced, Fan Shrouds * June 2014 7082 Trim Panel, Laminate, Vinyl Coated * Jan. 1994 7083 Trim Panel Composite, Polystyrene Foam Core * Jan. 1994 7084 Impact Trim, Extruded

22、Vinyl, Exterior * Mar. 1992 7085 Second Surface Decorative Finish - Plastics MPAPS G-7085 Aug 2016 7087 Vinyl Coated Fabric, Light Weight Door Trim * Apr. 1987 7088 Ticking, Mattress Cover MPAPS D-7088 June 2017 7089 Plastic Gears Speedometer * June 2014 7090 Polypropylene Filled Interior Trim TMS-7

23、116, Type 2C Apr. 1988 7091 Leather, Genuine, Vinyl-Coated TMS-7121, Type G Aug. 1994 7092 Heat Resistant Gaskets EMS D18-5006* Nov. 1985 7093 Vinyl Fabric, Vinyl Coated, Sleeper Curtain * Sept.1988 7094 Vinyl Coated Fabric, Back Printed TMS-7121, Type I Aug. 1994 Written and Approved by: Materials

24、Engineering NAVISTAR, INC. Material, Part and Process Specifications: Void Index This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2018 by Navistar, Inc. A

25、PRIL 2018 Page 17 of 19 DOCUMENT NUMBER TITLE REPLACED BY DATE OF VOID 7095 Material, Process, and QCR for Open Molded FRP Parts MPAPS D-7095 Oct. 2014 7097 Vinyl Coated Paper (Veneer) * June 2014 7099 Fastener Tape Systems MPAPS F-7099 Dec. 2016 7103 Mineral/Glass-Filled Nylon TMS-7102 Nov. 1987 71

26、04 Polyester Fabric, Heavy Cut Pile TMS-7126, Type E Jan. 1999 7105 Modified Polyphenylene-Oxide Heater Blower Housing * June 2014 7106 Non-Metallic Tubing (Metric-Type A Non-Metallic Tubing (Metric-Type B Non-Metallic Tubing (inch sizes) SAE J1394, Type A SAE J1394, Type B see TMS-7006 Oct. 1992 71

27、07 Interior Wood Grain Decorative Films MPAPS G-7107 June 2017 7108 Vinyl Coated Drill Fabric, Back Printed (Curtains) TMS-7121, Type I Aug. 1994 7109 Molded Fiberglass Headliner * June 2014 7110 Encapsulated or Molded Product Badges MPAPS D-7110 Aug. 2014 7113 Woven or Knit Fabric, Interior Trim -

28、Parts 1 Added CEMS BT-9, BT-10, BT-30, BT-31, BT-32, BT-33, BT-34, F-1 APPX, and TMS 1068, and 9010 R. Goluch 5/24/2017 1724 Added CEMS B-27 R. Goluch 6/15/2017 1726 Added CEMS D-32, DT-8, TMS 7072,7088, 7107 and 7127 R. Goluch 6/21/2017 1739 Added TMS 6028, 6601 R. Goluch 9/28/2017 1743 Added TMS 5003, 5004, 5012, 5015 R. Goluch 10/25/2017 1807 Added CEMS AT-3, B-41, B-51, BT-13, BT-36, BT-49, E-7, E-7 APPX, F-3, FT-1, TMS 1026, 6033, 9017, 9550 R. Goluch 2/13/2017 1818 Added TMS 1031, 1033, 1055 R. Goluch 5/7/2018