NAVISTAR CEMS B-28-2006 Regular Leaded and Unleaded Gasoline for Factory Fill.pdf
《NAVISTAR CEMS B-28-2006 Regular Leaded and Unleaded Gasoline for Factory Fill.pdf》由会员分享,可在线阅读,更多相关《NAVISTAR CEMS B-28-2006 Regular Leaded and Unleaded Gasoline for Factory Fill.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、INTERNATIONAL TRUCK and ENGINE CORPORATION CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION)NUMBER: CEMS B-28 TITLE: Regular Leaded And Unleaded Gasoline For Factory Fill CURRENT ISSUE DATE: August 2006 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE
2、OF: December 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult a
3、ppropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Added Sections 2.1 and 12.0. Revised Sections 4.0 and 9.1. 1.0 SCOPE This specification covers gasoline intended for factory fill in carburetted engines which may be stored for
4、 an extended period of time. 2.0 INTRODUCTION Fuel grades are used in factory fill applications to permit the vehicles to be driven at the end of the assembly line. 2.1 Restricted Chemical SubstancesEffective January 1, 2007, all product supplied to the requirements of this specification must comply
5、 with the requirements of the CEMS B-50 specification. 3.0 CONTENTS PAGE REFERENCE DOCUMENTS 1 PROPERTY REQUIREMENTS 2 QUALITY 3 METHODS OF TEST 3 SOURCE APPROVAL AND QUALITY CONTROL 3 DESIGNATION ON DRAWINGS AND PURCHASE ORDERS 3 PACKING AND SHIPPING 3 4.0 REFERENCE DOCUMENTS Unless otherwise speci
6、fied, the latest issue of all referenced standards shall apply. The following standards, specifications and regulations are referenced in this specification. Quality System Standard ISO 9001 or TS-16949 ASTM D 86 ASTM D 1266 INTERNATIONAL IQR Quality Standard ASTM D 130 ASTM D 2273 INTERNATIONAL Man
7、ufacturing Standard D-13 ASTM D 323 ASTM D 2533 INTERNATIONAL CEMS BT-17 ASTM D 381 ASTM D 2622 INTERNATIONAL CEMS B-50 ASTM D 439 ASTM D 2700 CFR Title 29, Part 1910 ASTM D 526 ASTM D 3229 ASTM D 3231 This document is restricted and may not be sent outside International Truck and Engine Corporation
8、 or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2006 International Truck and Engine Corporation AUGUST 2006 Page 1 of 3 NUMBER: TITLE Regular Leaded And Unleaded Gasoline CURRENT ISSUE DATE: CEMS B-28 For Factory FillAugust
9、 2006 This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2006 International Truck and Engine Corporation 5.0 CLASSIFICATION OR D
10、ESIGNATION Fuel grades are classified on the basis of octane rating and additive (lead) content. 6.0 PROPERTY REQUIREMENTSThe material purchased to this specification will conform to the following requirements: Specification Limit Grade 28 L (Leaded) Grade 28 U (Unleaded) Property winter spring and
11、fall summer winter spring and fall summer Test Method (ASTM unless Otherwise specified) lbf (psi) 14.5 11.5 9.5 14.5 11.5 9.5 Vapor Pressure, Max* kPa 100.0 79.2 65.5 100.0 79.2 65.5 D323 Vapor Liquid Ratio V/L, max 20 20 20 20 20 20 F 105 124 140 105 124 140 at test temperature C 41 51 60 41 51 60D
12、2533* F 120 135 150 120 135 150 10%, point, max C 49 57 66 49 57 66F 175-240 180-250 190-260 175-240 180-250 190-260 50% point C 79-116 82-121 88-127 79-116 82-121 88-127 F 370 380 380 370 380 380 90% point, max C 188 193 193 188 193 193 F 430 430end point, max C 221 221Distillation* (% evaporated)
13、residue, % max 2 2 D 86 motor method 84 83 D 2700 Octane Number, Min research method 91 91 D 2699 unwashed 10 10 Gum, Mg/100 ml, max existent 5 5D 381 Sulfur, % max 0.10 0.10 D 1266 or D2622 Corrosion, copper strip, 3 hr at 122F (50C), max 1 1 D 130g/U.S. gal 1.4 min - g/ liter 0.37 min - D 526 g/U.
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVISTARCEMSB282006REGULARLEADEDANDUNLEADEDGASOLINEFORFACTORYFILLPDF

链接地址:http://www.mydoc123.com/p-962001.html