[外语类试卷]大学英语六级模拟试卷795(无答案).doc
《[外语类试卷]大学英语六级模拟试卷795(无答案).doc》由会员分享,可在线阅读,更多相关《[外语类试卷]大学英语六级模拟试卷795(无答案).doc(23页珍藏版)》请在麦多课文档分享上搜索。
1、大学英语六级模拟试卷 795(无答案)一、Part I Writing (30 minutes)1 Directions: For this part, you are allowed 30 minutes to write a composition on the topic: Salary or Interest. You should write at least 150 words following the outline given below:1. 如今的大学毕业生面临的职业选择:兴趣重要还是工资重要2. 你的观点3. 结论 二、Part II Reading Comprehen
2、sion (Skimming and Scanning) (15 minutes)Directions: In this part, you will have 15 minutes to go over the passage quickly and answer the questions attached to the passage. For questions 1-4, mark:Y (for YES) if the statement agrees with the information given in the passage;N (for NO) if the stateme
3、nt contradicts the information given in the passage;NG (for NOT GIVEN) if the information is not given in the passage.1 AutomationThe term automation was coined around 1946 by the automobile industry to describe the increased use of automatic devices and controls in mechanized production lines. Toda
4、y, it is widely used in a manufacturing context but is also applied outside of manufacturing in connection with a variety of systems in which there is a significant substitution of mechanical, electrical, or computerized action for human effort and intelligence. An operation is commonly described as
5、 automated if it is Substantially more automatic than its predecessor.In its most general usage, automation can be defined as a technology concerned with carrying out a process by means of programmed commands combined with the automatic feedback of data relating to the execution of those commands. T
6、he resulting system is capable of operating without human intervention. The development of this technology has become increasingly dependent on the use of computers and computer-related technologies. As a consequence, automated systems have become sophisticated and complex. Advanced systems of this
7、sort now represent a level of capability and performance that surpass in many ways the abilities of humans to accomplish the same activities.Automation technology has matured to a point where a number of other technologies have developed from it and have achieved a recognition and status of their ow
8、n. Robotics is one such technology. It is a specialized branch of automation in which the automated machine possesses certain characteristics. The most typical humanlike characteristic of a modern industrial robot is its powered mechanical arm. The robots arm can be programmed to do a sequence of mo
9、tions to perform useful tasks, such as loading and unloading parts at a production machine or making a sequence of spot-welds on the body of an automobile. The robot will repeat the motion pattern until it is reprogrammed to perform some alternative task. As these examples of robot applications sugg
10、est, an industrial robot is typically used to replace a human worker in a factory operation.The field of robotics has its roots in the development of automation technology. Numerical control (NC) and telecherics are two important areas of technology that constitute the foundations of robotics techno
11、logy.Over the years, the social merits of automation have been argued by labour leaders, government officials, business executives, and college professors. No doubt the biggest controversy has focused on the employment issue: What is the effect of automation on employment? There are other important
12、aspects of the automation issue as well, including its effect on productivity, economic competition, education, and quality of life.The advantages commonly attributed to automation include increased production rates, more efficient use of materials, better product quality, improved safety, shorter w
13、orkweeks for labour, and reduction of factory lead times.Automated machines are usually designed to operate at higher production rates than humans are capable of achieving. This increased productivity has been one of the biggest reasons for justifying the adoption of automated systems. Notwithstandi
14、ng the claims of high quality from good workmanship by humans, automated systems are generally capable of carrying out the manufacturing process with less variability that humans make, thus yielding greater control and consistency of product quality. In addition, the increased process control makes
15、possible more efficient use of materials, resulting in less waste.Automated manufacturing systems often, remove workers from the workplace, thus safeguarding them against hazards in the work environment. In the United States, the Occupational Safety and Health Act of 1970 (OSHA) was enacted with the
16、 objective of making work safer and protecting the physical well-being of the worker on a national scale. OSHA has had the effect of promoting the use of automation and robotics in the factory.Another of the benefits of automation noted above is the reduction in the number of hours worked on average
17、 per week by factory workers. Around the turn of the century, the average workweek was about 70 hours. This has gradually been reduced, so that today the standard workweek in the United States is about 40 hours. Mechanization and automation have played a significant role in this reduction. Finally,
18、the time required to process a typical job through the factory is generally reduced with automation. Referred to as the manufacturing lead time, this is the amount of time between the beginning of a project or process and the appearance of its results.Among the major disadvantages associated with au
19、tomation is worker dislocation. This problem was touched upon earlier. Whatever the ultimate social benefits that might result from retraining displaced workers for other (perhaps more skilled) jobs, in almost all cases the worker whose job is taken over by a machine suffers considerable personal st
20、ress. In addition to displacement from work, the worker may be displaced geographically. To find other work, an individual may have to relocate, which is itself another source of emotional stress.Another significant disadvantage associated with automation is high capital expenditure. Automated syste
21、ms can cost millions of dollars to design, fabricate, and put into operation. Still other problems characteristic of automated equipment include a higher level of maintenance than is required by manually operated hardware and an inherent lack of flexibility in terms of the variety of products that c
22、an be produced.Also, automation is not without its potential dangers. As often suggested in works of science fiction, the technology associated with automation might ultimately subjugate rather than serve humankind. There is a possibility that workers will become slaves to automated machines, that t
23、he privacy of humans will be invaded by vast computer data banks, that human error in the management of technology will somehow endanger the health of civilization, and that society will become completely dependent on automation for its economic well-being.2 The foundations of robotics technology is
24、 mainly composed of the technology of numerical control. (A)Y(B) N(C) NG3 Telecherics is concerned with the use of remote manipulators controlled by humans. (A)Y(B) N(C) NG4 To accomplish the same activities, the capability and performance of advanced automated systems now do better in many ways tha
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
2000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 外语类 试卷 大学 英语六级 模拟 795 答案 DOC
