NASA UFGS-22 15 14 00 40-2011 GENERAL SERVICE COMPRESSED-AIR SYSTEMS LOW PRESSURE《通用低压空气压缩系统》.pdf
《NASA UFGS-22 15 14 00 40-2011 GENERAL SERVICE COMPRESSED-AIR SYSTEMS LOW PRESSURE《通用低压空气压缩系统》.pdf》由会员分享,可在线阅读,更多相关《NASA UFGS-22 15 14 00 40-2011 GENERAL SERVICE COMPRESSED-AIR SYSTEMS LOW PRESSURE《通用低压空气压缩系统》.pdf(35页珍藏版)》请在麦多课文档分享上搜索。
1、*USACE / NAVFAC / AFCESA / NASA UFGS-22 15 14.00 40 (February 2011)-Preparing Activity: NASA SupersedingUFGS-22 15 14 (August 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2011*SECTION TABLE OF CONTENTSDIVISION 22 - PLUMBINGSECTION 22 15 14.00 40GENERA
2、L SERVICE COMPRESSED-AIR SYSTEMS, LOW PRESSURE02/11PART 1 GENERAL1.1 REFERENCES1.2 GENERAL REQUIREMENTS1.3 SUBMITTALS1.4 GENERAL REQUIREMENTS1.5 OPERATION AND MAINTENANCE1.6 DRAWINGS1.7 PREDICTIVE TESTING AND INSPECTION TECHNOLOGY REQUIREMENTSPART 2 PRODUCTS2.1 UNDERGROUND PIPING MATERIALS2.1.1 Pipi
3、ng Types2.1.2 Fittings2.2 ABOVEGROUND PIPING MATERIALS2.2.1 Compressed Air Systems 862 Kilopascal 125 Psig and Less2.2.1.1 Type BCS Black Carbon Steel2.2.1.2 Type GCS Galvanized Carbon Steel2.2.2 Control and Instrumentation Tubing, to 207 kilopascal 30 Psig2.2.2.1 Copper2.2.2.2 Polyethylene2.3 PIPIN
4、G SPECIALTIES2.3.1 Air Pressure Reducing Stations2.3.2 Air Line Lubricators2.3.3 Compressed Air Receivers2.3.4 Grooved Pipe Couplings and Fittings2.3.5 Pressure Gages2.3.6 Thermometers2.3.7 Line Strainers2.4 AIR COMPRESSORS2.5 VALVES2.5.1 Ball Valves (BAV)2.5.2 Butterfly Valves (BUV)2.5.3 Diaphragm
5、Control and Instrument Valves (DCIV)2.5.4 Gage Cocks (GC)SECTION 22 15 14.00 40 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.5.5 Gate Valves (GAV)2.5.6 Globe and Angle Valves (GLV and ANV)2.5.7 Eccentric Plug Valves (EPV)2.6 MISCELLANEOUS
6、MATERIALS2.6.1 Bolting2.6.2 Elastomer Calk2.6.3 Escutcheons2.6.4 Flashing2.6.5 Flange Gaskets2.6.6 Pipe Thread Compounds2.7 SUPPORTING ELEMENTS2.7.1 Building Structure Attachments2.7.2 Horizontal Pipe Attachments2.7.3 Vertical Pipe Attachments2.7.4 Hanger Rods and Fixtures2.7.5 Supplementary SteelPA
7、RT 3 EXECUTION3.1 UNDERGROUND PIPING SYSTEM INSTALLATION3.1.1 Compressed Air System Installation3.1.2 Valve Boxes3.2 ABOVE GROUND PIPING SYSTEM INSTALLATION3.2.1 Piping Systems3.2.2 Joints3.2.3 Control and Instrument Air Tubing3.2.4 General Service Valve Locations3.2.5 Bypass Throttling Valves3.2.6
8、Supporting Elements Installation3.2.7 Sound Stopping3.2.8 Sleeves3.2.9 Escutcheons3.2.10 Flashings3.3 COMPRESSED AIR SYSTEMS TESTING3.3.1 Preliminary Stage Tests3.3.2 Test Gages3.3.3 Acceptance Pressure Testing3.4 COMPRESSED AIR SYSTEM CLEANING3.5 COMPRESSED AIR SYSTEMS IDENTIFICATION- End of Sectio
9、n Table of Contents -SECTION 22 15 14.00 40 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-22 15 14.00 40 (February 2011)-Preparing Activity: NASA SupersedingUFGS-22 15 14 (August 2010)UNIFIED FACILITIES GU
10、IDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2011*SECTION 22 15 14.00 40GENERAL SERVICE COMPRESSED-AIR SYSTEMS, LOW PRESSURE02/11*NOTE: This guide specification covers the requirements for aboveground and underground piping systems and certain components with pressure ratings
11、of 862 kilopascal 125 pounds per square inch, gage and less, using existing air supply.Drawings shall show size, rating, or other details of piping requirements for specific project application not covered in the specifications.Drawings must use symbols or legends indicated herein adding proper suff
12、ix where provided. For example,“ 100 millimeter 4-inch Type BCS-PS.“Drawings shall indicate underground piping requiring supports from slabs.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specificat
13、ion sections. Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are p
14、resent.Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the SECTION 22 15 14.00 40 Page 3Provided by IHSNot for ResaleNo reproduction or
15、 networking permitted without license from IHS-,-,-publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference fe
16、ature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the pr
17、oject specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN INSTITUTE OF STEEL CONSTRUCTION
18、(AISC)ANSI/AISC 360 (2005) Specification for Structural Steel BuildingsAMERICAN WATER WORKS ASSOCIATION (AWWA)AWWA C104/A21.4 (2008; Errata 2010) Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for WaterAWWA C504 (2010) Standard for Rubber-Seated Butterfly ValvesAMERICAN WELDING SOCIETY (AWS
19、)AWS WHB-2.9 (2004) Welding Handbook; Volume 2, Welding Processes, Part 1AWS-03 (2001) Welding Handbook, Volumes 1 thru 4ASME INTERNATIONAL (ASME)ASME A112.18.1/CSA B125.1 (2005; Update 2006) Plumbing Supply FittingsASME B16.1 (2010) Gray Iron Threaded Fittings; Classes 25, 125 and 250ASME B16.22 (2
20、001; R 2010) Standard for Wrought Copper and Copper Alloy Solder Joint Pressure FittingsASME B16.3 (2006) Malleable Iron Threaded Fittings, Classes 150 and 300SECTION 22 15 14.00 40 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASME B16.39 (2
21、009) Standard for Malleable Iron Threaded Pipe Unions; Classes 150, 250, and 300ASME B16.5 (2009) Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch StandardASME B16.9 (2007) Standard for Factory-Made Wrought Steel Buttwelding FittingsASME B18.2.2 (2010) Standard for Square and He
22、x NutsASME B19.3 (1991; Addenda A 1994; Addenda B 1995) Safety Standard for Compressors for Process IndustriesASME B31.1 (2010) Power PipingASME B31.3 (2008) Process PipingASME B40.100 (2005) Pressure Gauges and Gauge AttachmentsASME BPVC (2010) Boiler and Pressure Vessels CodeASME BPVC SEC VIII D1
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NASAUFGS22151400402011GENERALSERVICECOMPRESSEDAIRSYSTEMSLOWPRESSURE 通用 低压 空气 压缩 系统 PDF
链接地址:http://www.mydoc123.com/p-836579.html