NA to BS EN 1992-1-2-2004 UK National Annex to Eurocode 2 Design of concrete structures - Part 1-2 General rules - Structural fire design《欧洲法规2的英国国家附录 混凝土结构的设计 第1-2部分 一般规则 结构防火设计》.pdf

《NA to BS EN 1992-1-2-2004 UK National Annex to Eurocode 2 Design of concrete structures - Part 1-2 General rules - Structural fire design《欧洲法规2的英国国家附录 混凝土结构的设计 第1-2部分 一般规则 结构防火设计》.pdf》由会员分享，可在线阅读，更多相关《NA to BS EN 1992-1-2-2004 UK National Annex to Eurocode 2 Design of concrete structures - Part 1-2 General rules - Structural fire design《欧洲法规2的英国国家附录 混凝土结构的设计 第1-2部分 一般规则 结构防火设计》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、NATIONAL ANNEXNA to BS EN 1992-1-2:2004UK National Annex to Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire designICS 13.220.50; 91.010.30; 91.080.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3

2、g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSINA to BS EN 1992-1-2:2004This National Annex was published under the authority of the Standards Policy and Strategy Committee on 8 D

3、ecember 2005 BSI 8 December 2005First edition December 2005 The following BSI references relate to the work on this National Annex:Committee reference B/525/2Draft for comment 05/30134001ISBN 0 580 47245 0Committees responsible for this National AnnexThe preparation of this National Annex was entrus

4、ted by Committee B/525, Building and civil engineering structures, to B/525/2, Structral use of concrete, upon which the following bodies were represented:Association of Consulting EngineersBritish Cement AssociationBritish Precast Concrete Federation Ltd.Building Research EstablishmentConcrete Soci

5、etyDepartment of Transport (Highways Agency)Institution of Civil EngineersInstitution of Structural EngineersOffice of the Deputy Prime MinisterScottish Building Standards AgencyUK SteelCo-opted membersSummary of pagesThis document comprises a front cover, an inside front cover, pages 1 and 2, an in

6、side back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSINA to BS EN 1992-1-2:2004 BSI

7、 8 December 20051National Annex (informative) to BS EN 1992-1-2:2004, Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire designIntroductionThis National Annex has been prepared by BSI Subcommittee B/525/2, Structural use of concrete. In the UK it is to be used in conju

8、nction with BS EN 1992-1-2:2004.NA.1 ScopeThis National Annex gives:a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1992-1-1:2004; 2.1.3 (2) 5.3.2 (2) 2.3 (2)P 5.6.1 (1) 3.2.3 (5) 5.7.3 (2) 3.2.4 (2) 6.1 (5) 3.3.3 (1) 6.2 (2) 4.1 (1)P 6.3 (

9、1) 4.5.1 (2) 6.4.2.1 (3) 5.2 (3) 6.4.2.2 (2)b) the UK decisions on the status of BS EN 1992-1-2:2004 informative annexes;c) references to non-contradictory complementary information.NA.2 Nationally Determined ParametersUK decisions for the Nationally Determined Parameters described in BS EN 1992-1-2

10、:2004 are given in Table NA.1.NA.3 Decisions on the status of informative annexesBS EN 1992-1-2:2004 informative Annexes A, B, C, D and E may be used in the UK.NA.4 References to non-contradictory complementary informationThe tabular methods for the design of columns described in BS EN 1992-1-2:2004

11、, 5.3 are limited to braced structures. Guidance on unbraced structures is given in PD 6687:2005, Clause 4.BibliographyPD 6687:2005, Background paper to the UK National Annexes to BS EN 1992-1-1 and BS EN 1992-1-2.Licensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSIN

12、A to BS EN 1992-1-2:20042 BSI 8 December 2005TableNA.1 UKdecisions for Nationally Determined Paramters described inBS EN 1992-1-2:2004SubclauseNationallyDeterminedParameterEurocode recommendationUK decision2.1.3(2)Values of %1and %2%1= 200 K%2= 240 KUse the recommended values2.3(2)PPartial safetyfac

13、tor M,fi1,0 for both thermaland mechanicalpropertiesUse the recommended value3.2.3(5)Values for theparameters of the stress-strain relationship of reinforcingsteel at elevated temperaturesClass N (Table 3.2a)or Class X (Table 3.2b)Class N(Table 3.2a)3.2.4(2)Values for theparameters of the stress-str

14、ain relationship of cold worked (wires and strands) prestressingsteel atelevated temperaturesClass Aor Class Bin Table 3.3Class A3.3.3(1)Value of thermal conductivitycLimitsdefined in3.3.3(2)The lower limitdefinedin3.3.3(2)4.1(1)PUse ofadvancedcalculation methods tosatisfy 2.4.1(2)PNoneProperlyvalid

15、ated advancedcalculation methods may be used4.5.1(2)Value of moisture content k% below which spallingis unlikely to occur3 %Use the recommended value5.2(3)Reference loadlevelfi0,7Use the recommended value5.3.1(1)Tabulated data for unbraced structuresNoneNone5.3.2(2)Value of emax0,15h(or b)Use the re

16、commended value5.6.1(1)Web thicknessClass WA, WB or WCWA5.7.3(2)Additional rules on rotation capacity atsupports for continuoussolid slabsNoneNone6.1(5)Reduction ofstrengthatelevatedtemperature for high strength concretesFor C55/67andC60/75: Class 1ofTable 6.1NFor C70/85andC80/95: Class 2ofTable 6.1

17、NFor C90/105: Class 3 ofTable 6.1NThe recommended classes should be used.However, alternative values may beusedbut only ifsatisfactory test evidenceis available.6.2(2)Methods to control spallingof highstrength concretesMethodsA toDAny of the Methods A to D or a combination of the methods may be used

18、6.3(1)Value of thermal conductivityfor highstrength concreteLimitsgiven in 3.3.3(2)The upper limit defined in 3.3.3(2)6.4.2.1(3)Value of factork1,1 for Class 1 ofTable 6.1N1,3 for Class 2 ofTable 6.1NUse the recommended values6.4.2.2(2)Value of factorkmkmvaluesgiven in Table 6.2NUse the recommended

19、valuesLicensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSINA to BS EN 1992-1-2:2004BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent n

20、ational body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess

21、the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of

22、which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and f

23、oreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI imp

24、lementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic in

25、formation services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts

26、on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi

27、- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 19

28、88 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details su

29、ch as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Tue Mar 07 02:22:30 GMT 2006, Uncontrolled Copy, (c) BSI