ITU-T X 745-1993 Information Technology - Open Systems Interconnection - Systems Management Test Management Function - Data Networks and Open Systems Communications OSI Management .pdf

《ITU-T X 745-1993 Information Technology - Open Systems Interconnection - Systems Management Test Management Function - Data Networks and Open Systems Communications OSI Management .pdf》由会员分享，可在线阅读，更多相关《ITU-T X 745-1993 Information Technology - Open Systems Interconnection - Systems Management Test Management Function - Data Networks and Open Systems Communications OSI Management .pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION ITU=T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU DATA NETWORKS AND OPEN SYSTEMS COMMUNICATIONS OS1 MANAGEMENT x.745 (1 1/93) INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: TEST MANAGEMENT FUNCTION ITU-T Recommendation X.745 FORE

2、WORD ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. Some 179 member countries, 84 telecom operating entities, 145 scientific and industr

3、ial organizations and 38 international organizations participate in ITU-T which is the body which sets world telecommunications standards (Recommendations). The approval of Recommendations by the Members of ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, 1993). In add

4、ition, the World Telecommunication Standardization Conference (WTSC), which meets every four years, approves Recommendations submitted to it and establishes the study programme for the following period. In some areas of information technology which fall within ITU-T?s purview, the necessary standard

5、s are prepared on a collaborative basis with IS0 and IEC. The text of ITU-T Recommendation X.745 was approved on 16th of November 1993. The identical text is also published as ISO/IEC International Standard 10164-12. NOTE In this Recommendation, the expression ?Administration? is used for concisenes

6、s to indicate both a telecommunication administration and a recognized operating agency. O ITU 1994 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writin

7、g from the ITU. 1 2 3 4 5 6 7 8 9 10 11 12 13 CONTENTS Scope . Normative references . Definitions . Abbreviations Conventions Rey uirements Model for the test function . Generic definitions . Service definitions Systems management functional units Protocol Relationships with other functions . Confor

8、mance . Annex A . Definition of management information Annex B . Examples . ITU-T Rec . X.745 (1993 E) Page 1 1 3 5 5 6 6 14 20 26 27 32 32 34 46 i Summary This Recommendation I International Standard specifies a model and managed objects for the invocation of tests on remote resources. Tests may be

9、 controlled and subject to monitoring, suspension and resumption during application or uncontrolled and where results are returned until complete. ii ITU-T Rec. X.745 (1993 E) ITU-T RECMNrX.745 93 = YBb2591 0590116 93T m ISO/IEC 10164-12 : 1994 (E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMA

10、TION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: TEST MANAGEMENT FUNCTION 1 Scope This Recommendation I International Standard defines a Systems Management Function that may be used by an application process in a centralized or decentralize$ management environment to interact for

11、 the purpose of systems management, as defined by CCITT Rec. X.700 I ISOAEC 7498-4. This Recommendation I International Standard defines a function which consists of generic definitions, services and functional units. This function is positioned in the application layer of CCITT Rec. X.200 I ISOAEC

12、7498 and is defined according to the model provided by IS0 9545. The role of systems management functions is described by CCITT Rec. X.701 I ISOAEC 10040. This Recommendation I International Standard - - establishes user requirements for this Recommendation I International Standard: establishes a te

13、st model that relates the service and generic definitions provided by this function to user requirements; defines generic object classes, attribute types, action types, notification types, packages and parameters documented in accordance with CCITT Rec. X.722 I ISO/IEC 10165-4; specifies compliance

14、requirements placed on other standards that make use of these generic definitions; defines the service provided by the function; specifies the protocol that is necessary in order to provide the service; defines the relationship between this service and SMI operations and notifications; specifies the

15、 abstract syntax necessary to identify and negotiate the functional unit in protocol; defines relationships with other systems management functions; specifies conformance requirements to be met by implementations of this Recommendation I International Standard. - - - - - - - - This Recommendation I

16、International Standard does not - - - - define the nature of any implementation intended to provide the Test management function; specify the manner in which management is accomplished by the user of the Test management function; define the nature of any interactions which result in the use of the T

17、est management function; specify the services necessary for the establishment, normal and abnormal release of a management association; specify the details of specific tests or test categories; specify a framework or methodology for conformance tests. - - 2 Normative references The following Recomme

18、ndations I International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation I International Standard. At the time of publication, the editions indicated were valid. All Recommendations I Standards are subject to revision, and parties to a

19、greements based on this Recommendation I International Standard are encouraged to investigate the possibility of applying the most recent editions of the Recommendations I Standards listed below. Members of IEC and IS0 maintain registers of currently valid International Standards. The Telecommunicat

20、ions I Standardization Bureau of the ITU maintains a list of currently valid ITU-T Recommendations. ITU-T Rec. X.745 (1993 E) 1 ISO/IEC 10164-12 : 1993(E) 2.1 Identical Recommendations I International Standards - ITU-T Recommendation X.210 (1993) I ISOIEC 10731: 1993, Information technology - Open S

21、ystems Interconnection - Basic Reference Model - Conventions for the definition of OS1 services. - ISOTR 8509: 1987, Information processing systems - Open Systems Interconnection - Service conventions. CCITT Recommendation X.701 (1992) I ISOAEC 10040:1992, Information technology - Open Systems Inter

22、connection - Systems management overview. CCITT Recommendation X.731 (1992) I ISODEC 10164-2: 1992, Information technology - Open Systems Interconnection - Systems Management: State management function. CCITT Recommendation X.732 (1992) I ISODEC 10164-3: 1992, Information technology - Open Systems I

23、nterconnection - Systems Management: Attributes for representing relationships. CCITT Recommendation X.734 I ISODEC 10164-5: 1992, Information technology - Open Systems Interconnection - Systems Management: Event report management function. CCITT Recommendation X.720 (1992) I ISODEC 10165-1: 1992, I

24、nformation technology - Open Systems Interconnection - Structure of Management information: Management information model. CCITT Recommendation X.721 (1992) i ISOIEC 10165-2: 1992, Information technology - Open Systems Interconnection - Structure of management information: Definition of management in

25、formation. CCITT Recommendation X.722 (1992) I ISO/IEC 10165-4: 1992, Information technology - Open Systems Interconnection - Structure of management information: Guidelines for the definition of managed objects. - - - - - - - 2.2 Paired Recommendations I International Standards equivalent in techni

26、cal content - CCITT Recommendation X.200 (1988), Reference Model of Open Systems Interconnection for CCIT Applications. IS0 7498: 1984, Information processing systems - Open Systems Interconnection - Basic Reference Model. CCITT Recommendation X.208 (1988), Specification of Abstract Syntax Notation

27、One (ASN. I). ISOAEC 8824: 1990, Information technology - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1). CCITT Recommendation X.209 (1988), Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN. 1). IS0 8825: 1990, Information technology -

28、 Open Systems Interconnection - Specifcation of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1). CCIT Recommendation X.700, Management framework definition for Open Systems Interconnection (OSI) for CCIT applications. ISOIEC 7498-4: 1989, Information processing systems - Open Systems I

29、nterconnection - Basic Reference Model - Part 4: Managementframework. CCITT Recommendation X.710 (1991), Common Management Information Service Definition for CCIT Applications. ISO/IEC 9595: 1991, Information technology - Open Systems Interconnection - Common management information service defin it

30、ion. CCITT Recommendation X.290 (1991), OS1 Conformance Testing Methodology and Framework for Protocol Recommendations for CCITT Applications - General Concepts. ISOAEC 9646-1 : 1991, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part I: Gene

31、ral concepts. - - - - - 2.3 Additional references - ISOAEC 9545: 1989, Information processing systems - Open Systems Interconnection - Application Layer structure. 2 ITU-T Rec. X.745 (1993 E) ITU-T RECMNxX.745 93 W 4862593 0590117 876 = ISOAEC 10164-12 : 1994 (E) 3 Definitions For the purposes of th

32、is Recommendation I International Standard, the following definitions apply. 3.1 Basic reference model definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.200 I IS0 7498: a) open system; b) systems management. 3.2 Management framework def

33、initions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.700 I ISODEC 7498-4: a) managed object; b) systems management application-entity . 3.3 CMIS definitions This Recommendation I International Standard makes use of the following terms defined

34、 in CCITT Rec. X.710 I ISOAEC 9595: a) attribute; b) c) Common Management Information Service. Common Management Information Service Element: 3.4 Remote Operations definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.219 I ISODEC 9072- 1 :

35、 a) invoker; b) performer. 3.5 Systems management overview definitions This Recommendation I International Standard makes use of the following terms defined in CCITT Rec. X.701 I ISODEC 10040: a) agent; b) agent role; e) dependent conformance; d) general conformance; e) generic definitions; f) manag

36、ed object class; g) managed (open) system; h) manager: i) manager role; j) MIS-User; k) notification; 1) notification type; m) systems management application protocol; n) systems management functional unit. ITU-T Rec. X.745 (1993 E) 3 ITU-T RECMN*X.745 93 m 4862593 05703L 702 ISO/IEC 10164-12 : 1993

37、(E) 3.6 Management information model definitions This Recommendation I International Standard makes use of the following terms defined in CCIT Rec. X.720 I ISOAEC 10165-1: a) attribute type; b) containment hierarchy. 3.7 This Recommendation I International Standard makes use of the following term de

38、fined in CCIT Rec. X.722 I Guidelines for the definition of managed objects definitions ISOAEC 10165-4: template. 3.8 Event report management function definitions This Recommendation I International Standard makes use of the following term defined in CCITT Rec. X.734 I ISO/IEC 10164-5: event forward

39、ing discriminator. 3.9 OS1 conformance testing definitions This Recommendation I International Standard makes use of the following term defined in CCITT Rec. X.290 I ISO/IEC 9646- I : system conformance statement. 3.10 Additional definitions For the purposes of this Recommendation I International St

40、andard, the following definitions apply: 3.10.1 functionality, that are involved in a test. 3.10.2 controlled test: A test for which one or more test objects having the same value for the Test invocation identifier are created for the purpose of monitoring and control. Test results are provided by n

41、otifications emitted by the test objects or are made available as attribute values of the test objects. 3.10.3 as a result of the test. associated objects (AOS): Managed objects, distinct from MORT(s), TO(s) and managed objects with TARR intrusive test: A statement made with respect to a test invoca

42、tion if service user disruption will or may occur 3.10.4 which is used to refer to the functionalities that are being tested. 3.10.5 as a result of the test. managed object referring to test (MORT) (plural MORTS, one or more MORT): A managed object non-intrusive test: A statement made with respect t

43、o a test invocation if no service user disruption will occur 3.10.6 solicited reporting: The reporting of test results by use of TO attributes. 3.10.7 test action request receiver (TARR): A term used to identify the ability of a managed object to act upon a test request. In addition to those require

44、d as a TARR, the managed object may also have other attributes, operations and notifications. A managed object with TARR functionality may create (and subsequently delete) an instance of a particular TO class (as the result of receiving a controlled test request), representing a specific test invoca

45、tion. 3.10.8 documents the additional behaviour and templates necessary to realize a test. 3.10.9 test conductor: A manager that issues test operations. 3.10.10 test execution: That phase of a test during which the test outcome is being determined. test category: One or more tests which share a comm

46、on purpose and similar characteristics. A test category 4 ITU-T Rec. X.745 (1993 E) 3.10.11 test invocation: A specific instance of test, from the time of initiation to termination. 3.10.12 test object (TO): A managed object that exists only for a controlled test invocation and which has attributes,

47、 operations and notifications that pertain to that instance of test. 3.10.13 test object execution: That phase of testing which starts with a transition to the testing state and ends with a transition from the testing state. A TO may exhibit one or more such executions as a result of one test reques

48、t. 3.10.14 test operations: management operations concerned with tests. 3.10.15 test performer: An agent which receives test operations. 3.10.16 test request: An individual request issued by a test conductor to a test performer, in order to initiate one or more test invocations. 3.10.17 test results

49、: Information generated during test execution and made available to an open system. 3.10.18 test session: A set of test invocations. 3.10.19 uncontrolled test: A test which is not subject to monitoring or control. Test results are provided in one or more replies to the test request. 3.10.20 unsolicited reporting: The reporting of test results by use of test result notifications emitted by a TO. 4 Abbreviations AO Associated Object ASE Application Service Element CMIS Common Management Information Service Conf Confirm DN Distinguished Name Id Identifier Ind Indication MAPDU Ma