ITU-T Q 835-1999 Line and Line Circuit Test Management of ISDN and Analogue Customer Accesses《ISDN和模拟客户接入的线路和线路电路测试管理-系列Q 交换和信令-NO 7信令系统的准则-Q3接口》.pdf

《ITU-T Q 835-1999 Line and Line Circuit Test Management of ISDN and Analogue Customer Accesses《ISDN和模拟客户接入的线路和线路电路测试管理-系列Q 交换和信令-NO 7信令系统的准则-Q3接口》.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 835-1999 Line and Line Circuit Test Management of ISDN and Analogue Customer Accesses《ISDN和模拟客户接入的线路和线路电路测试管理-系列Q 交换和信令-NO 7信令系统的准则-Q3接口》.pdf（77页珍藏版）》请在麦多课文档分享上搜索。

1、 INTERNATIONAL TELECOMMUNICATION UNION Q.835 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (03/99) SERIES Q: SWITCHING AND SIGNALLING Specifications of Signalling System No. 7 Q3 interface Line and line circuit test management of ISDN and analogue customer accesses ITU-T Recommendation Q.835 (Prev

2、iously CCITT Recommendation) ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING For further details, please refer to ITU-T List of Recommendations. SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FO

3、R SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 Q.120Q.249 SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 Q.250Q.309 SPECIFICATIONS OF SIGNALLING SYSTEM R1 Q.310Q.399 SPECIFICATIONS OF SIGNALLING SYSTEM R2 Q.400Q

4、.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.849 General Q.700 Message transfer part (MTP) Q.701Q.709 Signalling connection control part (SCCP) Q.711Q.719 Telephone user part (TUP) Q.720Q.729 ISDN supplementary servi

5、ces Q.730Q.739 Data user part Q.740Q.749 Signalling System No. 7 management Q.750Q.759 ISDN user part Q.760Q.769 Transaction capabilities application part Q.770Q.779 Test specification Q.780Q.799 Q3 interface Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK

6、 Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1999 BROADBAND ISDN Q.2000Q.2999 Recommendation Q.835 (03/99) i ITU-T RECOMMENDATION Q.835 LINE AND LINE CIRCUIT TEST MANAGEMENT OF ISDN AND ANALOGUE CUSTOMER ACCESSES Summary The purpose of this Recomm

7、endation is to define the Q3 interface between a network element for customer access (i.e. local exchange, access network) and the telecommunications management network (TMN) for the support of line and line circuit test functions and the associated management for ISDN and analogue customer accesses

8、 which are connected either directly to a local exchange or remotely at an access network and across V5.1 and/or V5.2 interfaces to a local exchange. The focus of this Recommendation is on defining an object model based on ITU-T Recommendations Q.824.0, Q.824.5, Q.831, and X.745. Existing protocols

9、are used where possible. The definition of Operations System (OS) functionality is outside the scope of this Recommendation. Source ITU-T Recommendation Q.835 was prepared by ITU-T Study Group 4 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 26th of March 1999. Keyword

10、s Access network, information model, line and line circuit testing, local exchange, Q3 interface, TMN. Recommendation Q.835 (03/99) iiFOREWORD ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardiz

11、ation Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC

12、), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1. In some areas of info

13、rmation technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation the term recognized operating agency (ROA) includes any individual, company, corporation or governmental organization that operates a publi

14、c correspondence service. The terms Administration, ROA and public correspondence are defined in the Constitution of the ITU (Geneva, 1992). INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a cla

15、imed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, the

16、ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database. ITU 1999 All

17、 rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. Recommendation Q.835 (03/99) iii CONTENTS Page 1 Scope. 1 2 References. 1 3 Terms and d

18、efinitions, abbreviations 3 3.1 Definitions 3 3.2 Abbreviations 4 4 Line and line circuit testing functions. 4 4.1 Description of the service . 4 4.2 Components of service 5 4.3 Management function list . 5 4.4 Description of management functions 6 5 Information model diagrams. 6 5.1 Entity relation

19、ship diagram. 7 5.1.1 Line testing and line circuit testing 7 5.1.2 The testResultNotifications of the tests. 8 5.2 Inheritance hierarchy. 8 5.3 Naming hierarchy 9 6 Formal object class definitions . 10 6.1 Definitions of object classes . 10 6.1.1 Access port fragment . 10 6.1.2 Support fragment . 1

20、0 6.1.3 Test fragment. 10 6.2 Name bindings 19 6.2.1 Test fragment. 19 6.3 Definition of packages 22 6.3.1 Metallic Test Access Line Package . 22 6.3.2 Test environment conditions package . 22 6.3.3 Voice access package. 22 6.4 Definition of attributes 23 6.4.1 AC voltage threshold . 23 6.4.2 Access

21、 network ringback service treatment ID . 23 6.4.3 Apply ringing current. 23 6.4.4 Apply tone . 23 6.4.5 Capacitance threshold 24 6.4.6 DC voltage threshold . 24 Recommendation Q.835 (03/99) ivPage 6.4.7 Dial speed threshold 24 6.4.8 Electrical measurement test . 24 6.4.9 ISDN quick test 24 6.4.10 It

22、erations 24 6.4.11 Loopback channel 25 6.4.12 Loopback duration. 25 6.4.13 Loopback position . 25 6.4.14 Metallic test access message 25 6.4.15 Metallic test access timeout period 26 6.4.16 Monitor and speak . 26 6.4.17 Number of digits 26 6.4.18 Off hook simulation. 26 6.4.19 Proposed metallic test

23、 access. 27 6.4.20 Pulse no pulse ratio 27 6.4.21 Request result type. 27 6.4.22 Resistance threshold 27 6.4.23 Ring . 27 6.4.24 Ring back number 28 6.4.25 Number of subscriber private meter (SPM) pulses 28 6.4.26 Type of Line. 28 6.4.27 Wait time . 28 6.4.28 Test threshold class identifier 28 6.5 D

24、efinition of actions . 29 6.5.1 Loopback select . 29 6.6 Definition of notifications. 29 6.6.1 Off hook. 29 6.6.2 On hook . 29 6.6.3 Time out. 29 6.7 Definition of parameters . 30 6.7.1 Access result 30 6.7.2 Dialled digit test result. 30 6.7.3 Dialled digit test uncontrolled request. 30 6.7.4 Diall

25、ed digit test uncontrolled result . 30 6.7.5 Dial tone test result 30 6.7.6 Dial tone test uncontrolled request 31 6.7.7 Dial tone test uncontrolled result. 31 6.7.8 Electrical measurement test result . 31 6.7.9 Electrical measurement test uncontrolled request . 31 Recommendation Q.835 (03/99) v Pag

26、e 6.7.10 Electrical measurement test uncontrolled result 31 6.7.11 Generic test result 32 6.7.12 Invalid loopback request 32 6.7.13 ISDN quick test uncontrolled request 32 6.7.14 ISDN quick test uncontrolled result 32 6.7.15 Loopback test result. 32 6.7.16 Loop back test uncontrolled request 33 6.7.

27、17 Loop back test uncontrolled result. 33 6.7.18 Number of metallic test accesses. 33 6.7.19 Pattern test result . 33 6.7.20 Ringing test uncontrolled request 33 6.7.21 SPM pulses test uncontrolled request 34 6.7.22 Test to line circuit result 34 6.7.23 Test to line circuit uncontrolled request 34 6

28、.7.24 Test to line circuit uncontrolled result. 34 6.7.25 Voice access test result 34 6.7.26 ISDN quick test result 35 6.8 ASN.1 defined types module 35 7 Protocol requirements . 42 Annex A Requirements and specification of parameters for access port tests 42 A.1 General test requirements . 42 A.1.1

29、 Scheduled testing. 43 A.1.2 Test capability 43 A.2 Access port test requirements . 43 A.2.1 Access port test management functions. 43 A.2.2 Test scheduling 43 A.2.3 Test result management . 44 A.2.4 Test threshold management . 44 A.2.5 Test requirements description 44 Annex B Test categories . 49 B

30、.1 Electrical measurement tests. 49 B.2 Dialled digit test 50 B.3 Dial tone test . 51 B.4 Subscriber private meter pulses test 51 B.5 Ringing test . 52 B.6 Test to line circuit . 52 Recommendation Q.835 (03/99) viPage B.7 ISDN loopback test. 53 B.8 ISDN quick test. 54 Annex C Test termination. 54 C.

31、1 Termination of uncontrolled tests . 54 C.2 Termination of controlled tests . 55 C.2.1 One-step test 55 C.2.2 Test session 55 C.2.3 Aborting tests. 55 C.2.4 Termination sequence 56 Annex D Test result notification. 56 Annex E Additional requirements on the test action performer . 57 E.1 Indication

32、of supported tests . 57 E.2 Indication of unsuccessful test requests 57 Annex F Requirements and specification of parameters for V5 interface tests 57 F.1 V5 interface test requirements 57 F.1.1 V5 interface ID testing. 57 F.1.2 Link ID testing. 57 F.1.3 Provisioning variant testing. 57 Appendix I M

33、essage flows 58 Appendix II Description of test procedures Application for V5 access networks . 60 II.1 Background. 60 II.2 Test procedures scenario. 60 II.2.1 Scenario for faultsman ringback tests in an AN environment. 61 II.2.2 Scenario for a subscriber-assisted test in an AN environment 62 Append

34、ix III State management in relation with line testing Application for V5 access networks 64 III.1 Intrusive tests 64 III.2 Dealing with conflicts between intrusive tests and normal service 64 III.3 State values during intrusive testing . 65 III.4 V5 blocking mechanism . 65 Appendix IV Bibliography 6

35、6 Recommendation Q.835 (03/99) vii Introduction Line and circuit testing of analogue customer accesses and ISDN customer accesses is part of a management activity which is performed by the operator in order to detect failure conditions and to bring the customer access back to its normal state of ope

36、ration whenever a deviation occurs. A customer access is considered as being that part of the local network which extends from the network termination equipment up to and including the exchange termination. Here, only these parts of the activity are covered which are related directly to that part of

37、 the customer access which extends from the local exchange to the network termination equipment. An ISDN access extends to but does not include the T reference point. An analogue access extends to and may include the customer premises equipment (CPE) (see Figure 0). In Figure 0 both customer access

38、scenarios are illustrated: a) Direct access case for PSTN and ISDN customer to a local exchange (LE), which is shown in the top of Figure 0; b) Remote access case for PSTN and ISDN customer as well as for leased lines (semi-permanent lines) via an access network (AN) and across the V5.1 and/or V5.2

39、interface (as specified in Recommendations I.414, G.964 and G.965), shown in the bottom part of Figure 0. The shaded areas are subject to line and circuit testing and the associated management as presented within this Recommendation is based on the specifications within Recommendation Q.831. T040986

40、0-98PSTN TEISDN TETENT1PSTN UPISDN UPLL UPPSTN TEISDN TE NT1PSTN UPISDN UPZZT V5Q(LE)Q(AN)TAccessNetwork(AN)V5TPLocalExchange(LE)V5TPNOTE Shaded areas are subject to line and circuit testing. User ports (UP) represent the different configurations for line circuit, line termination, exchange terminat

41、ion and network termination (NT). The option of ISDN access without remote NT1 is valid for ISDN BA only.Figure 0/Q.835 Direct and remote customer access case scenarios Recommendation Q.835 (03/99) 1 Recommendation Q.835 LINE AND LINE CIRCUIT TEST MANAGEMENT OF ISDN AND ANALOGUE CUSTOMER ACCESSES (G

42、eneva, 1999) 1 Scope This Recommendation specifies the Q3 interface between a network element for customer access (i.e. local exchange, access network) and the Telecommunications Management Network (TMN) for the support of line and line circuit test functions and the associated management for ISDN a

43、nd analogue customer accesses which are connected either directly to a local exchange or remotely at an access network and across V5.1 and/or V5.2 interfaces to a local exchange. It is not mandatory to implement the test and measurements specified in this Recommendation for all types of customer acc

44、ess realisations. However, if any test is implemented and is required to be managed via the Q3 interface on the network element, it shall be modelled as described in this Recommendation. The focus of this Recommendation is on defining an object model based on Recommendation X.745 22. Existing protoc

45、ols are used where possible. The definition of Operations System (OS) functionality is outside the scope of this Recommendation. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendatio

46、n. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references

47、 listed below. A list of the currently valid ITU-T Recommendations is regularly published. 1 ITU-T Recommendation G.964 (1994), V-Interfaces at the digital local exchange (LE) V5.1-interface (based on 2048 kbit/s) for the support of access network (AN). 2 ITU-T Recommendation G.965 (1995), V-Interfa

48、ces at the digital local exchange (LE) V5.2 Interface (based on 2048 kbit/s) for the support of access network (AN). 3 ITU-T Recommendation M.3010 (1996), Principles for a telecommunications management network. 4 ITU-T Recommendation M.3100 (1995), Generic network information model. 5 CCITT Recommen

49、dation M.3603 (1992), Application of maintenance principles to ISDN basic rate access. 6 CCITT Recommendation M.3604 (1992), Application of maintenance principles to ISDN primary rate access. 7 ITU-T Recommendation Q.543 (1993), Digital exchange performance design objectives. 8 ITU-T Recommendation Q.811 (1997), Lower layer protocol profiles for the Q3 and X interfaces. Recommendation Q.835 (03/99) 29 ITU-T Recommendation Q.812 (1997), Upper layer protocol profiles for the Q3 and X interfaces. 10 ITU-