ITU-T Q 1221-1997 Introduction to Intelligent Network Capability Set 2 (Study Group 11)《IN CS-2介绍》.pdf

《ITU-T Q 1221-1997 Introduction to Intelligent Network Capability Set 2 (Study Group 11)《IN CS-2介绍》.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 1221-1997 Introduction to Intelligent Network Capability Set 2 (Study Group 11)《IN CS-2介绍》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU SERIES Q: SWITCHING AND SIGNALLING Intelligent Network Q.1221 (09197) Introduction to Intelligent Network Capability Set 2 ITU-T Recommendation Q.1221 (Previously CCITT Recommendation) STDmITU-T RECMN Q*LZZL-

2、ENGL 1777 M 48b257l Ob443bl 7b2 M . ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5

3、SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 SPECIFICATIONS OF SIGNALLING SYSTEM RI SPECIFICATIONS OF SIGNALLING SYSTEM R2 DIGITAL EXCHANGES INTERWORKING OF SIGNALLING SYSTEMS SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 PUBLIC LAND MOBILE NETWORK INTERWORKING WI

4、TH SATELLITE MOBILE SYSTEMS INTELLIGENT NE BROADBAND ISDN CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.1-Q.3 Q .4-Q. 59 Q. 6 O-Q. 99 Q. I OO-Q. 1 I 9 Q.120-Q.249 Q ,250-Q. 3 O9 Q.310-Q.399 Q .400-Q . 49 9 Q.500-Q.599 Q.600-Q ,699 Q.700-Q. 849 Q 850-Q.999 Q. 1000-Q. 1 O99 Q. 1 1 OO-Q. 1 1 99 Q.1200

5、-Q.1999 Q.2000-Q.2999 For further details, please refer to ITU-T List of Recommendations. ITU-T RECOMMENDATION Q.1221 INTRODUCTION TO INTELLIGENT NETWORK CAPABILITY SET 2 Summary Intelligent Network Capability Set 2 (IN CS-2) is the second standardized stage of the Intelligent Network (IN) as an arc

6、hitectural concept for the creation and provision of services, including telecommunication services, service management services and service creation services. This Recommendation gives an introduction to IN CS-2. It describes the main characteristics and overall capabilities of IN CS-2 and defines

7、the service aspects, network aspects and functional relationships that form the basis of the IN CS-2 capabilities. This Recommendation is the first in the Q.122-Series of Recommendations devoted to IN CS-2, which builds on the architectural principles of IN as described in the Q.121- and the Q.120-S

8、eries of Recommendations. The IN CS-2 Recommendations form a detailed and stable basis for implementing IN CS-2 telecommunication services. They also provide high-level guidelines for supporting service management services, service creation services and some partially supported telecommunication ser

9、vices. The IN CS-2 Recommendations are intended to give the same degree of technical information as the IN CS-1 Recommendations (1995). . Source ITU-T Recornmendation Q.1221 was prepared by ITU-T Study Group 11 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 12th of Sep

10、tember 1997. FOREWORD ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tari

11、ff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce

12、 Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with I

13、S0 and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the possibility that the practice or implementation of this

14、Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the da

15、te of approval of this Recommendation, the ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to co

16、nsult the TSB patent database. O ITU 1998 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. 11 Recommendation Q.1221 (09197) . STD-ITU

17、-T RECMN Q-1221-ENGL 1997 D 48b259L Ob1i43b4 471 1 2 3 3.1 3.2 4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 6.3 6.4 7 7.1 7.2 CONTENTS Introduction Phased standardization . General description and scope of IN CS-2 . Criteria for IN CS-2 Evolution of IN CS-2 Overview of IN CS-2 Recommendations . Service aspects Tel

18、ecommunication services Service management services . Service creation services Network support of IN CS-2 services . Network aspects Network functions Control architecture principles . 6.2.1 Service invocation and control 6.2.2 End-user interactions . 6.2.3 Service management . Feature interactions

19、 Consistency among IN CS-2 supported service features Functional relationships and interfaces Functional relationships and control classes 7.1.1 Bearer connection control . 7.1.2 Non-IN call control . 7.1.3 IN service control 7.1.4 Service management control . 7.1.5 Non-IN call unrelated control Key

20、 functions and interfaces 7.2.1 Single point multiple points of control 7.2.2 Single-endedmulti-ended calls . 7.2.3 Mid-call interruption . 7.2.4 Call party handling 7.2.5 Enhanced SRF . 7.2.6 Call unrelated user interaction . 7.2.7 Out-channel call related user interaction . Recommendation 0.1221 0

21、9/97) Page 1 2 2 2 2 5 5 6 7 7 8 9 9 9 10 10 10 10 11 Il 12 12 12 12 12 12 13 13 13 13 13 . 111 STD-ITU-T RECMN Q*LZZL-ENGL 1997 = 48b259L Ob1i43b5 308 7.2.8 Service/feature interaction (service processing) 7.2.9 Internetworking . 7.2.1 O Security 7.2.12 Service management . 7.2.13 Service creation

22、. 7.2.14 Personal mobility 7.2.1 1 IN-TMN Appendix I . IN CS-2 benchmark services and features . I . 1 General . 1.2 Definitions 1.2.1 Telecommunication services . 1.2.2 Service management services 1.2.3 Service creation services . 1.3 Telecommunication services 1.3.1 General 1.3.2 Definitions . 1.3

23、.3 Mobility service features (UPT. FPLMTS) . 1.3.4 Other services 1.3.5 Other service features 1.4 Service management services . 1.4.1 General 1.4.2 Definition 1.4.3 Service management servicelservice feature . 1.5 Service creation services 1.5.1 General 1.5.2 Service specification services . 1.5.3

24、Service development services . 1.5.4 Service verification services 1.5.5 Service deployment services . 1.5.6 Service creation service management services Page 13 14 15 16 16 19 21 22 22 22 22 22 22 22 22 22 23 28 30 34 34 34 35 37 37 37 37 38 38 39 iv Recommendation Q.1221 (09/97) Recommendation Q.1

25、221 INTRODUCTION TO INTELLIGENT NETWORK CAPABILITY SET 2 (Geneva, I99 7) 1 Introduction Intelligent Network Capability Set 2 (IN CS-2) is the second standardized stage of the Intelligent Network (IN) as an architectural concept for the creation and provision of services, including telecommunication

26、services, service management services and service creation services. This Recommendation gives an introduction to IN CS-2. It describes the main characteristics and overall capabilities of IN CS-2 and defines the service aspects, network aspects and functional relationships that form the basis of th

27、e IN CS-2 capabilities. Listed below are the acronyms used in this Recommendation: BCSM CCAF CCF CCIS CRACF cs CURACF CUSF DTMF FE GFP IAF INAP IN-SSM ISDN ISUP ITU-T OAM PBX PE PLMN PSTN QOS RCF SCE SCEF SCF Basic Call State Model Call Control Agent Function Call Control Function Common Channel Int

28、eroffice Signalling Call-related Radio Access Control Function Capability Set Call-Unrelated Radio Access Control Function Call-Unrelated Service Function Dual-Tone Multi-Frequency Functional Entity Global Functional Plane Intelligent Access Function Intelligent Network Application Protocol IN-Switc

29、hing State Model Integrated Services Digital Network ISDN User Part International Telecommunication Union - Telecommunication Standardization Sector Operation, Administration, and Maintenance Private Branch Exchange Physical Entity Public Land Mobile Network Public Switched Telephone Network Quality

30、 of Service Radio Control Function Service Creation Environment Service Creation Environment Function Service Control Function Recommendation Q.1221 (09/97) 1 SCUAF SDF SIB SMAF SMF SRF ss7 SSF TMN UPT STD-ITU-T RECMN Q-LZZL-ENGL 1777 W 48b2.571 Ob443b7 180 Service Control User Agent Function Servic

31、e Data Function Service-Independent Building Blocks Service Management Access Function Service Management Function Specialized Resource Function Signalling System No. 7 Service Switching Function Telecommunications Management Network Universal Personal Telecommunication 2 Phased standardization The

32、phased approach of IN capability sets has been described in Recommendation Q.1201. In order to prepare for the next phases of IN (CS-3 and beyond), the IN CS-2 Recommendations contain both complete technical specifications (with complete support for physical architecture and detailed protocol descri

33、ption) and incomplete specifications that are intended to be the base for subsequent capability sets (with SIB description and the impact on the functional architecture). Capabilities which are only incompletely covered by IN CS-2 Recommendations are highlighted through special notes or caveats. 3 G

34、eneral description and scope of IN CS-2 3.1 Criteria for IN CS-2 IN CS-2 defines an initial subset of IN capabilities that meet the following general criteria: a b) cl d) IN CS-2 is a subset of the target Intelligent Network architecture; IN CS-2 is a superset of IN CS-I, as defined in the IN CS-1 R

35、ecommendations (1995); IN CS-2 is a set of definitions of capabilities that is of direct use to both manufacturers and network operators; IN CS-2 provides network capabilities defined to support the set of IN CS-2 benchmark services or service features. These capabilities can also be used for the su

36、pport of other services that may, or may not, be standardized by ITU-T. The IN CS-2 architecture could be applied for PSTN, ISDN, and mobile networks. 3.2 Evolution of IN CS-2 The IN CS-2 Recommendations (Q. 122x-Series) form a detailed and stable basis for implementing IN CS-2 telecommunication ser

37、vices. They also give high-level guidelines for supporting service management services and service creation services and some partially supported telecommunication services. Complete technical specifications of these services will be in the subsequent IN capability sets. As IN CS-1, IN CS-2 takes in

38、to account the evolution requirement. It is defined to support the IN CS-2 benchmark services and service features without assumptions that are known to limit its evolution into future capability sets. 2 Recommendation Q.1221 (09/97) The IN CS-2 Recommendations are intended to give the same degree o

39、f technical information as the IN CS-1 Recommendations (Q. 12lx-Series). Rec. 4 Table 1 contains an overview of the Recommendations that are specifically related to IN CS-2: Overview of IN CS-2 Recommendations Title Q.1220 Q.1221 Q. 1220-Series Intelligent network capability set 2 Recommendation str

40、ucture Introduction to Intelligent Network Capability Set 2 I Q. 1222 I Service plane for Intelligent Network Capability Set 2 -1 Q. 1223 Q. 1224 Q. 1225 Global functional plane for Intelligent Network Capability Set 2 Distributed functional plane for Intelligent Network Capability Set 2 Physical pl

41、ane for Intelligent Network Capability Set 2 1 Q. 1228 I Interface Recommendation for Intelligent Network Capability Set 2 1 Q. 1229 Q. 1290 Intelligent network users guide for capability set 2 Glossary of terms used in the definition of intelligent networks 5 Service aspects The services and servic

42、e features that are to be supported by IN CS-2 are fundamental to the IN CS-2 Service-Independent Building Blocks (SIBS), call processing model and service control principles. Three types of services have been identified in IN CS-2: telecommunication service, service management service and service c

43、reation services. The last two types of services are first introduced in IN CS-2. Tables 2 and 3 list IN CS-2 benchmark services and service features, which, in addition to IN CS-I related telecommunication services/service features, can be used to identify and verify the service-independent capabil

44、ities of IN CS-2. Appendix I provides short prose descriptions of the benchmark services and service features. It was used to develop the current Q.122-Series of Recommendations and was intended for this purpose only. It is not to be used by service designers for service creation. Recommendation Q.1

45、221 (09/97) 3 STD-ITU-T RECMN Q.122L-ENGL 1997 m 48b257L Ob443b7 T53 NOTE 1 - The above service names apply to the descriptions of targeted services (see Appendix I), and 1 not to the user-network interface descriptions provided by ITU-T Study Group 1. NOTE 2 - Network implementation aspects may be

46、important for some services. a) These services may be partially supported in IN CS-2. For example, they may be supported at the GFP level but not supported at the protocol level. Some of these services may also require capabilities beyond IN CS-2. Please note that SIBS are used for modelling purpose

47、. They are not meant to be used as a standardized solution for service creation, even though some organizations may wish to use them for this purpose. Table 2/Q.1221- Target set of IN CS-2 telecommunication services Benchmark telecommunication services Internetwork Freephone (IFPH) Internetwork Prem

48、ium rate (IPRM) Internetwork Mass calling (IMAS) Internetwork televoting (IVOT) Global Virtual Network Service (GVNS) Completion of Call to Busy Subscriber (CCBS) a) Conference calling (CONF) Call Hold (HOLD) Call Transfer (CT) Call Waiting (CW) Hot line (HOT) Multimedia (MMD) a) Terminating Key Cod

49、e Screening (TKCS) a) Message Store and Forward (MSF) International Telecommunication Charge Card (ITCC) a) Mobility services (UPT) a) Table 3/Q.1221- Target set of IN CS-2 telecommunication service features Benchmark telecommunication service features User Authentication (UAUT) User Registration (UREG/outgoing call registration) Secure Answering (SANSW) Follow-On (FO) Flexible (call) Origination Authorization (FOA) Flexible (call) Termination Authorization (FTA) Provision of Stored Messages (PSM) Multiple Terminal Address Registration (MTAR) a) Int