ITU-T G 9962 AMD 1-2016 Unified high-speed wire-line based home networking transceivers - Management specification Amendment 1《基于统一高速线路的家庭网络收发器管理规范修改件1(研究组15)》.pdf

《ITU-T G 9962 AMD 1-2016 Unified high-speed wire-line based home networking transceivers - Management specification Amendment 1《基于统一高速线路的家庭网络收发器管理规范修改件1(研究组15)》.pdf》由会员分享，可在线阅读，更多相关《ITU-T G 9962 AMD 1-2016 Unified high-speed wire-line based home networking transceivers - Management specification Amendment 1《基于统一高速线路的家庭网络收发器管理规范修改件1(研究组15)》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.9962 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Amendment 1 (04/2016) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Access networks In premises networks Unified high-speed wire-line based hom

2、e networking transceivers Management specification Amendment 1 Recommendation ITU-T G.9962 (2014) Amendment 1 ITU-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS INTERNATIONAL TELEPHONE CONNECTIONS AND CIRCUITS G.100G.199 GENERAL CHARACTERISTICS COMMON TO ALL

3、ANALOGUE CARRIER-TRANSMISSION SYSTEMS G.200G.299 INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON METALLIC LINES G.300G.399 GENERAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON RADIO-RELAY OR SATELLITE LINKS AND INTERCONNECTION WITH METALLIC LINES G.400G.449

4、COORDINATION OF RADIOTELEPHONY AND LINE TELEPHONY G.450G.499 TRANSMISSION MEDIA AND OPTICAL SYSTEMS CHARACTERISTICS G.600G.699 DIGITAL TERMINAL EQUIPMENTS G.700G.799 DIGITAL NETWORKS G.800G.899 DIGITAL SECTIONS AND DIGITAL LINE SYSTEM G.900G.999 MULTIMEDIA QUALITY OF SERVICE AND PERFORMANCE GENERIC

5、AND USER-RELATED ASPECTS G.1000G.1999 TRANSMISSION MEDIA CHARACTERISTICS G.6000G.6999 DATA OVER TRANSPORT GENERIC ASPECTS G.7000G.7999 PACKET OVER TRANSPORT ASPECTS G.8000G.8999 ACCESS NETWORKS G.9000G.9999 Metallic access networks G.9700G.9799 Optical line systems for local and access networks G.98

6、00G.9899 In premises networks G.9900G.9999 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T G.9962 (2014)/Amd.1 (04/2016) i Recommendation ITU-T G.9962 Unified high-speed wire-line based home networking transceivers Management specification Amendment 1 Summary Recom

7、mendation ITU-T G.9962 specifies the physical and data link layer management for the ITU-T G.996x-series home networking transceiver specifications. It defines common management parameters and protocols for all ITU-T G.996x-series Recommendations for the purpose of device configuration, status and p

8、erformance management, fault monitoring and diagnostics. It also provides management functionalities to coordinate multiple domains. Amendment 1 includes support for LCMP communication through the L1 and L6 interfaces. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T G.9962 2

9、013-07-12 15 11.1002/1000/11901 1.1 ITU-T G.9962 (2013) Amd.1 2013-08-29 15 11.1002/1000/12005 2.0 ITU-T G.9962 2014-10-14 15 11.1002/1000/12084 2.1 ITU-T G.9962 (2014) Amd. 1 2016-04-13 15 11.1002/1000/12821 _ * To access the Recommendation, type the URL http:/handle.itu.int/ in the address field o

10、f your web browser, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1000/11830-en. ii Rec. ITU-T G.9962 (2014)/Amd.1 (04/2016) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, in

11、formation and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a

12、worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down

13、in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication ad

14、ministration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory p

15、rovisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTSITU draws attentio

16、n to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others ou

17、tside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the late

18、st information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2015 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T G.9962 (2014)/Amd.1 (04/20

19、16) iii Table of Contents Page 1 Scope . 1 2 References . 1 3 Definitions 2 3.1 Terms defined elsewhere 2 3.2 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 3 5 Conventions 3 6 Architecture and reference model . 3 6.1 Architecture 3 6.2 Reference model . 7 7 ITU-T G.996x inter

20、face data model . 8 Annex A LCMP communication through L1 interface 9 A.1 LCMP_CONTROL in L1 interface 9 Annex B LCMP communication through L6 interface . 10 B.1 LCMP_CONTROL in L6 interface 10 Annexes C to U 11 Annex V Versioning dependencies of ITU-T G.9962 12 Rec. ITU-T G.9962 (2014)/Amd.1 (04/20

21、16) 1 Recommendation ITU-T G.9962 Unified high-speed wire-line based home networking transceivers management specification Amendment 1 Editorial note: This is a complete-text publication. Modifications introduced by this amendment are shown in revision marks relative to Recommendation ITU-T G.9962 (

22、2014). 1 Scope This Recommendation specifies the physical and data link layer management for the ITU-T G.996x-series home networking transceiver specifications. It defines the management architecture, protocols and common management parameters, for all ITU-T G.996x-series Recommendations. More speci

23、fically, this Recommendation includes the following: Architecture and reference model for management layer; Management protocols defined in ITU-T G.9980, BBF TR-069, necessary for device configuration, status and performance management, fault monitoring, and diagnostics and security; Management para

24、meters defined in BBF TR-181 I2A8 for transparent integration with remote management functionality; Global master (GM) functionality that facilitates coordination of multiple ITU-T G.996x domains. 2 References The following ITU-T Recommendations and other references contain provisions which, through

25、 reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the

26、 most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T G.9960

27、Recommendation ITU-T G.9960 (2011), Unified high-speed wire-line based home networking transceivers System architecture and physical layer specification. ITU-T G.9961 Recommendation ITU-T G.9961 (2014), Unified high-speed wire-line based home networking transceivers Data link layer specification. IT

28、U-T G.9963 Recommendation ITU-T G.9963 (2011), Unified high-speed wire-line based home networking transceivers Multiple input/multiple output specification. ITU-T G.9964 Recommendation ITU-T G.9964 (2011), Unified high-speed wire-line based home networking transceivers Power spectral density specifi

29、cation. ITU-T G.9980 Recommendation ITU-T G.9980 (2012), Remote management of customer premises equipment over broadband networks Customer premises equipment WAN Management Protocol. BBF TR-069 Broadband Forum TR-069 (2013), CPE WAN Management Protocol. 2 Rec. ITU-T G.9962 (2014)/Amd.1 (04/2016) BBF

30、 TR-181 I2A8 Broadband Forum TR-181 Issue 2, Amendment 8 (2014), Device data model for TR-0691. 3 Definitions 3.1 Terms defined elsewhere None. 3.2 Terms defined in this Recommendation This Recommendation defines the following terms: 3.2.1 client: An application entity distinguished in the network b

31、y its unique address (e.g., MAC address). 3.2.2 domain: A part of an ITU-T G.996x home network comprising the domain master and all those nodes that are registered with the same domain master. In the context of this Recommendation, use of the term “domain“ without a qualifier means “ITU-T G.996x dom

32、ain“, and use of the term “alien domain“ means “non-ITU-T G.996x domain“. Additional qualifiers (e.g., “power-line“) may be added to either “domain“ or “alien domain“. 3.2.3 domain master (DM): A node that manages (coordinates) all other nodes of the same domain (i.e., assigns bandwidth resources an

33、d manages user priorities). A node with domain master capabilities has all the capabilities of an endpoint node and may act as a relay node. 3.2.4 endpoint node: This term is used in this Recommendation according to the context to differentiate between the domain master node functionalities and non-

34、domain master node functionalities. 3.2.5 global master (GM): A function that provides coordination between different domains (such as communication resources, priority setting, policies of domain masters and crosstalk mitigation). A global master may also convey management functions initiated by th

35、e remote management system (e.g., the Broadband Forum CPE WAN management protocol) to support broadband access. 3.2.6 home network: Two or more nodes that can communicate with each other either directly or through a relay node at the physical layer, or through an inter-domain bridge above the physic

36、al layer. A home network consists of one or more domains. In the context of this Recommendation, use of the term “home network“ means “ITU-T G.9960 home network“. Use of the term “alien home network“ means “non-ITU-T G.9960 home network“. Use of the term “network“ without a qualifier means any combi

37、nation of “ITU-T G.9960 home network“, “non-ITU-T G.9960 home network“ and “access network“. Use of the term “alien network“ means any combination of “non-ITU-T G.9960 home network“ and “access network“. 3.2.7 logical (functional) interface: An interface in which the semantic, syntactic and symbolic

38、 attributes of information flows are defined. Logical interfaces do not define the physical properties of signals used to represent the information. It is defined by a set of primitives. 3.2.8 medium: A wire-line facility, of a single wire class, allowing physical connection between nodes. Nodes con

39、nected to the same medium may communicate on the physical layer, and may interfere with each other unless they use orthogonal signals (e.g., different frequency bands, different time periods). 3.2.9 node: Any network device that contains an ITU-T G.9960 transceiver. In the context of this Recommenda

40、tion, use of the term “node“ without a qualifier means “ITU-T G.9960 node“, and use _ 1 See also http:/www.broadband-forum.org/cwmp/tr-181-2-8-0.html for the root object definitions. Rec. ITU-T G.9962 (2014)/Amd.1 (04/2016) 3 of the term “alien node“ means “non-ITU-T G.9960 node“. Additional qualifi

41、ers (e.g., “relay“) may be added to either “node“ or “alien node“. 3.2.10 reference point: A location in a signal flow, either logical or physical, that provides a common point for observation and/or measurement of the signal flow. 3.2.11 registration: The process used by a node to join the domain.

42、4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: AE Application Entity DLL Data Link Layer DM Domain Master DME DLL Management Entity DMME Domain Master Management Entity GM Global Master GME Global Master Entity LCMP Layer 2 Configuration and Managemen

43、t Protocol LLC Logical Link Control LSB Least Significant Bit MCS Management, Control and Security MSB Most Significant Bit NME Node Management Entity NMS Network Management System PHY Physical PME PHY Management Entity SC Security Controller SCE Security Controller Entity 5 Conventions None. 6 Arch

44、itecture and reference model 6.1 Architecture A model of the ITU-T G.9960 management, control, and security (MCS) architecture is depicted in Figure 6-1. The model consists of various entities located either within nodes, within a domain, or external to the domain. MCS entities provide management, c

45、ontrol, and security of the layer they reside in as well as services and interfaces to enable MCS communications. The structure of MCS begins with the layers of the node; the physical (PHY) layer and the data link layer (DLL). Each of these has a specific MCS entity. Above these in the MCS hierarchy

46、, but still within Layer 2, is the node management entity (NME), which is responsible for managing the nodes overall functions. Outside of the node are two entities that reside in the same domain as the node. 4 Rec. ITU-T G.9962 (2014)/Amd.1 (04/2016) These are the security controller entity (SCE) a

47、nd the domain master management entity (DMME). These manage and control their specific areas of responsibility (e.g., security for the SCE) within the domain. These two entities are still within Layer 2 as they are solely functioning to facilitate Layer 2 activities. These two entities are considere

48、d to operate at the domain level, unlike the node located ones that operate at the node or device level. The next entity is the global master entity (GME). This entity is defined as external to the domain, performing management and control functions for all domains within a specific home network. Gl

49、obal master (GM) functions are logical and able to be distributed among its managed domain masters (DMs). As GM functions concern actions that span multiple domains within a common network, it is referenced as operating at the network level for logical representation of its place in the MCS hierarchy. This is an arbitrary assignment given the logical nature of the GM. Entities that perform functions above the security controller (SC) and the GM or, in its absenc