ITU-R M 1801-2-2013 Radio interface standards for broadband wireless access systems including mobile and nomadic applications in the mobile service operating below 6 GHz《在低于6 GHz下运.pdf

《ITU-R M 1801-2-2013 Radio interface standards for broadband wireless access systems including mobile and nomadic applications in the mobile service operating below 6 GHz《在低于6 GHz下运.pdf》由会员分享，可在线阅读，更多相关《ITU-R M 1801-2-2013 Radio interface standards for broadband wireless access systems including mobile and nomadic applications in the mobile service operating below 6 GHz《在低于6 GHz下运.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、 Recommendation ITU-R M.1801-2(02/2013)Radio interface standards for broadband wireless access systems, including mobile and nomadic applications, in the mobile service operating below 6 GHzM SeriesMobile, radiodetermination, amateurand related satellite servicesii Rec. ITU-R M.1801-2 Foreword The r

2、ole of the Radiocommunication Sector is to ensure the rational, equitable, efficient and economical use of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of which Recommendations are a

3、dopted. The regulatory and policy functions of the Radiocommunication Sector are performed by World and Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is described in the Common Pate

4、nt Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Forms to be used for the submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implementation of the Common Patent P

5、olicy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be found. Series of ITU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; film for television BS Broadcas

6、ting service (sound) BT Broadcasting service (television) F Fixed service M Mobile, radiodetermination, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorology SF Frequency sharing and

7、 coordination between fixed-satellite and fixed service systems SM Spectrum management SNG Satellite news gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the procedure detailed in Resolution I

8、TU-R 1. Electronic Publication Geneva, 2013 ITU 2013 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R M.1801-2 1 RECOMMENDATION ITU-R M.1801-2*Radio interface standards for broadband wireless access systems, in

9、cluding mobile and nomadic applications, in the mobile service operating below 6 GHz (Questions ITU-R 212-4/5 and ITU-R 238-2/5) (2007-2010-2013) 1 Introduction This Recommendation recommends specific standards for broadband wireless access1in the mobile service. These specific standards are compose

10、d of common specifications developed by standards development organizations (SDOs). Using this Recommendation, manufacturers and operators should be able to determine the most suitable standards for their needs. These standards support a wide range of applications in urban, suburban and rural areas

11、for both generic broadband Internet data and real-time data, including applications such as voice and videoconferencing. 2 Scope This Recommendation identifies specific radio interface standards for BWA systems in the mobile service operating below 6 GHz. The standards included in this Recommendatio

12、n are capable of supporting users at broadband data rates, taking into account the ITU-R definitions of “wireless access” and “broadband wireless access” found in Recommendation ITU-R F.13992. This Recommendation is not intended to deal with the identification of suitable frequency bands for BWA sys

13、tems, nor with any regulatory issues. 3 Related ITU Recommendations The existing Recommendations that are considered to be of importance in the development of this particular Recommendation are as follows: Recommendation ITU-R F.1399 Vocabulary of terms for wireless access. Recommendation ITU-R F.17

14、63 Radio interface standards for broadband wireless access systems in the fixed service operating below 66 GHz. Recommendation ITU-R M.1678 Adaptive antennas for mobile systems. *This Recommendation should be brought to the attention of ITU-T Study Groups 2 and 15. 1“Wireless access” and “BWA” are d

15、efined in Recommendation ITU-R F.1399, which also provides definitions of the terms “fixed”, “mobile” and “nomadic” wireless access. 2Broadband wireless access is defined as wireless access in which the connection(s) capabilities are higher than the primary rate, which is defined as the transmission

16、 bit rate of 1.544 Mbit/s (T1) or 2.048 Mbit/s (E1). Wireless access is defined as end-user radio connection(s) to core networks. 2 Rec. ITU-R M.1801-2 4 Acronyms and abbreviations AA Adaptive antenna ACK Acknowledgement (channel) AN Access network ARIB Association of Radio Industries and Businesses

17、 ARQ Automatic repeat request AT Access terminal ATIS Alliance for Telecommunications Industry Solutions ATM Asynchronous transfer mode BCCH Broadcast control channel BER Bit-error ratio BRAN Broadband radio access network BS Base station BSR Base station router BTC Block turbo code BWA Broadband wi

18、reless access CC Convolutional coding CDMA Code division multiple access CDMA-MC Code division multiple access multi-carrier CL Connection layer C-plane Control plane CQI Channel quality indicator CS-OFDMA Code spread OFDMA CTC Convolutional turbo code DECT Digital enhanced cordless telecommunicatio

19、ns DFT Discrete Fourier transform DLC Data link control DS-CDMA Direct-sequence code division multiple access DSSS Direct sequence spread spectrum E-DCH Enhanced dedicated channel EGPRS Enhanced general packet radio service EPC Evolved packet core ETSI European Telecommunication Standards Institute

20、EV-DO Evolution data optimized FC Forward channel FCC Forward control channel Rec. ITU-R M.1801-2 3 FDD Frequency division duplex FEC Forward-error correction FER Frame error rate FHSS Frequency hopping spread spectrum FSTD Frequency switched transmit diversity FT Fixed termination GERAN GSM edge ra

21、dio access network GoS Grade of service GPRS General packet radio service GPS Global positioning system HC-SDMA High capacity-spatial division multiple access HiperLAN High performance RLAN HiperMAN High performance metropolitan area network HRPD High rate packet data HSDPA High speed downlink packe

22、t access HS-DSCH High speed downlink shared channel HSUPA High speed uplink packet access ICIC Inter-cell interference coordination IEEE Institute of Electrical and Electronics Engineers IETF Internet Engineering Task force IP Internet protocol LAC Link access control LAN Local area network LDPC Low

23、 density parity check LLC Logic link control LTE Long term evolution MAC Medium access control MAN Metropolitan area network MCSB Multi-carrier synchronous beamforming MIMO Multiple input multiple output MS Mobile station NLoS Non-line-of-sight OFDM Orthogonal frequency-division multiplexing OFDMA O

24、rthogonal frequency-division multiple access OSI Open systems interconnection PAPR Peak-to-average power ratio 4 Rec. ITU-R M.1801-2 PDCP Packet data convergence protocol PHS Personal handyphone system PHY Physical layer PLP Physical layer protocol PMI Preferred matrix index PT Portable termination

25、QAM Quadrature amplitude modulation QoS Quality-of-service RAC Reverse access channel RF Radio frequency RIT Ratio Interface Technologies RLAN Radio local area network RLC Radio link control RLP Radio link protocol RTC Reverse traffic channel SC Single carrier SC-FDMA Single carrier-frequency divisi

26、on multiple access SCG Subcarrier group SDMA Spatial division multiple access SDO Standards development organization SFBC Space frequency block coding SISO Single input single output SL Security/session/stream layer SM Spatial multiplexing SNP Signalling network protocol TCC Traffic code channels TD

27、D Time-division duplex TDMA Time-division multiple access TDMA-SC TDMA-single carrier TD-SCDMA Time-division-synchronized CDMA TTA Telecommunications Technology Association TTI Transmission time interval U-plane User plane WiBro Wireless broadband WirelessMAN Wireless metropolitan area network WTSC

28、Wireless Technologies and Systems Committee Rec. ITU-R M.1801-2 5 WWINA Wireless wideband Internet access XGP eXtended Global Platform 5 Noting Recommendation ITU-R F.1763 recommends radio interface standards for broadband wireless access systems in the fixed service operating below 66 GHz. The ITU

29、Radiocommunication Assembly, recommends that the radio interface standards in Annexes 1 to 8 should be used for BWA systems in the mobile service operating below 6 GHz. NOTE 1 Annex 9 provides a summary of the characteristics of the standards found in Annexes 1 to 8. Annex 1 Broadband radio local ar

30、ea networks Radio local area networks (RLANs) offer an extension to wired LANs utilizing radio as the connective media. They have applications in commercial environments where there may be considerable savings in both cost and time to install a network; in domestic environments where they provide ch

31、eap, flexible, connectivity to multiple computers used in the home; and in campus and public environments where the increasing use of portable computers, for both business and personal use, while travelling and due to the increase in flexible working practices, e.g., nomadic workers using laptop per

32、sonal computers not just in the office and at home, but in hotels, conference centres, airports, trains, planes and automobiles. In summary, they are intended mainly for nomadic wireless access applications, with respect to the access point (i.e. when the user is in a moving vehicle, the access poin

33、t is also in the vehicle). Broadband radio local area network standards are included in Recommendation ITU-R M.1450, and can be grouped as follows: IEEE 802.11 ETSI BRAN HIPERLAN ARIB HiSWANa. 1 IEEE 802.11 The IEEE 802.11 Working Group has developed a standard for RLANs, IEEE Std 802.11-2012, which

34、 is part of the IEEE 802 series of standards for local and metropolitan area networks. The medium access control (MAC) unit in IEEE Std 802.11 is designed to support physical layer units as they may be adopted dependent on the availability of spectrum. IEEE Std 802.11 operates in the 2 400-2 500 MHz

35、 band and in the bands comprising 3 650-3 700 MHz, 4.94-4.99 GHz, 5.03-5.091 GHz, 5.15-5.25 GHz, 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725-5.850 GHz. 6 Rec. ITU-R M.1801-2 IEEE Std 802.11 employs the frequency hopping spread spectrum (FHSS) technique, direct sequence spread spectrum (DSSS) technique,

36、orthogonal frequency division multiplexing (OFDM) technique, and multiple input and multiple output (MIMO) technique. Approved amendments to the IEEE 802.11-2012 base standard include Prioritization of Management Frames (IEEE 802.11ae), and Robust Audio Video Streaming (IEEE 802.11aa). The URL for t

37、he IEEE 802.11 Working Group is http:/www.ieee802.org/11. IEEE Std 802.11-2012 and some amendments are available at no cost through the Get IEEE 802 program at http:/standards.ieee.org/about/get, and future amendments will become available for no cost six months after publication. Approved amendment

38、s and some draft amendments are available for purchase at http:/ 2 ETSI BRAN HIPERLAN The HiperLAN 2 specifications were developed by ETSI TC (Technical Committee) BRAN (broadband radio access networks). HiperLAN 2 is a flexible RLAN standard, designed to provide high-speed access up to 54 Mbit/s at

39、 physical layer (PHY) to a variety of networks including Internet protocol (IP) based networks typically used for RLAN systems. Convergence layers are specified which provide interworking with Ethernet, IEEE 1394 and ATM. Basic applications include data, voice and video, with specific quality-of-ser

40、vice parameters taken into account. HiperLAN 2 systems can be deployed in offices, classrooms, homes, factories, hot spot areas such as exhibition halls and, more generally, where radio transmission is an efficient alternative or complements wired technology. HiperLAN 2 is designed to operate in the

41、 bands 5.15-5.25 GHz, 5.25-5.35 GHz and 5.47-5.725 GHz. The core specifications are TS 101 475 (physical layer), TS 101 761 (data link control layer), and TS 101 493 (convergence layers). All ETSI standards are available in electronic form at: http:/pda.etsi.org/pda/queryform.asp, by specifying the

42、standard number in the search box. ETSI TC BRAN has also developed conformance test specifications for the core HIPERLAN 2 standards, to assure the interoperability of devices and products produced by different vendors. The test specifications include both radio and protocol testing. ETSI TC BRAN ha

43、s worked closely with IEEE-SA (Working Group 802.11) and with MMAC in Japan (Working Group High Speed Wireless Access Networks) to harmonize the systems developed by these three fora for the 5 GHz bands. 3 MMAC3HSWA4MMAC HSWA has developed and ARIB5has approved and published a standard for broadband

44、 mobile access communication systems. It is called HiSWANa (ARIB STD-T70). The scope of the technical specifications is limited to the air interface, the service interfaces of the wireless subsystem, the convergence layer functions and supporting capabilities required to realize the services. The te

45、chnical specifications describe the PHY and MAC/DLC layers, which are core network independent, and the core network-specific convergence layer. The typical data rate is from 6 to 3Multimedia Mobile Access Communication Systems Promotion Council (now called “Multimedia Mobile Access Communication Sy

46、stems Forum” or “MMAC Forum”). 4High Speed Wireless Access Committee. 5Association of Radio Industries and Businesses. Rec. ITU-R M.1801-2 7 36 Mbit/s. The OFDM technique and TDMA-TDD scheme are used. It is capable of supporting multimedia applications by providing mechanisms to handle the quality-o

47、f-service (QoS). Restricted user mobility is supported within the local service area. Currently, only Ethernet service is supported. The HiSWANa system is operated in the 5 GHz bands (4.9-5.0 GHz and 5.15-5.25 GHz). Annex 2 IMT-2000 terrestrial radio interfaces The section titles are taken from 5 of

48、 Recommendation ITU-R M.1457, additional updated information can be found there. 1 IMT-2000 CDMA Direct Spread6The UTRAN radio-access scheme is direct-sequence CDMA (DS-CDMA) with information spread over approximately 5 MHz bandwidth using a chip rate of 3.84 Mchip/s. Higher order modulation (64-QAM

49、 in downlink and 16-QAM in uplink), multiple input multiple output antennas (MIMO), improved L2 support for high data rates and coding techniques (turbo codes) are used to provide high-speed packet access. A 10 ms radio frame is divided into 15 slots (2 560 chip/slot at the chip rate of 3.84 Mchip/s). A physical channel is therefore defined as a code (or number of codes). For HS-DSCH (high-speed downlink packet access HSDPA), E-DCH (high-speed uplink packet access HSUPA) and associated signalling channels, 2 ms subframes consisti