ISA 75 08 03-2001 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150 300 600 900 1500 and 2500)《承插焊接端头和螺旋端头球状控制阀的面到面尺寸(等级 150 300 6.pdf

《ISA 75 08 03-2001 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150 300 600 900 1500 and 2500)《承插焊接端头和螺旋端头球状控制阀的面到面尺寸(等级 150 300 6.pdf》由会员分享，可在线阅读，更多相关《ISA 75 08 03-2001 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150 300 600 900 1500 and 2500)《承插焊接端头和螺旋端头球状控制阀的面到面尺寸(等级 150 300 6.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 AMERICAN NATIONAL STANDARD ANSI/ISA75.08.032001 (R2013) Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) Approved 31 January 2013 ANSI/ISA-75.08.03-2001 (R2013) Face-to-Face Dimensions for Socket Weld-End and Screwed

2、-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ISBN: 978-1-937560-97-3 Copyright 2013 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any

3、 form or by any means (electronic mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709- 3 - ANSI/ISA-75.08.03-2001 (R2013) Preface This preface, as well as all foo

4、tnotes and annexes, is included for information purposes and is not part of ANSI/ISA-75.08.03-2001 (R2013). This document has been prepared as part of the service of ISA towards a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should b

5、e subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E

6、-mail: standardsisa.org. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the b

7、enefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, reco

8、mmended practices, and technical reports to the greatest extent possible. IEEE/ASTM SI 10, American National Standard for Metric Practice, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welco

9、me the participation of all concerned individuals and interests in the development of ISA standards, recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of an

10、y of the standards, recommended practices, and technical reports that ISA develops. CAUTION ISA DOES NOT TAKE ANY POSITION WITH RESPECT TO THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS ASSERTED IN CONNECTION WITH THIS DOCUMENT, AND ISA DISCLAIMS LIABILITY FOR THE INFRINGEMENT OF ANY PATENT RESULTIN

11、G FROM THE USE OF THIS DOCUMENT. USERS ARE ADVISED THAT DETERMINATION OF THE VALIDITY OF ANY PATENT RIGHTS, AND THE RISK OF INFRINGEMENT OF SUCH RIGHTS, IS ENTIRELY THEIR OWN RESPONSIBILITY. PURSUANT TO ISAS PATENT POLICY, ONE OR MORE PATENT HOLDERS OR PATENT APPLICANTS MAY HAVE DISCLOSED PATENTS TH

12、AT COULD BE INFRINGED BY USE OF THIS DOCUMENT AND EXECUTED A LETTER OF ASSURANCE COMMITTING TO THE GRANTING OF A LICENSE ON A WORLDWIDE, NON-DISCRIMINATORY BASIS, WITH A FAIR AND REASONABLE ROYALTY RATE AND FAIR AND REASONABLE TERMS AND CONDITIONS. FOR MORE INFORMATION ON SUCH DISCLOSURES AND LETTER

13、S OF ASSURANCE, CONTACT ISA OR VISIT WWW.ISA.ORG/STANDARDSPATENTS. OTHER PATENTS OR PATENT CLAIMS MAY EXIST FOR WHICH A DISCLOSURE OR LETTER OF ASSURANCE HAS NOT BEEN RECEIVED. ISA IS NOT RESPONSIBLE FOR IDENTIFYING PATENTS OR PATENT APPLICATIONS FOR WHICH A LICENSE MAY BE REQUIRED, FOR CONDUCTING I

14、NQUIRIES INTO THE LEGAL VALIDITY OR SCOPE OF PATENTS, OR DETERMINING WHETHER ANY LICENSING TERMS OR CONDITIONS PROVIDED IN CONNECTION WITH SUBMISSION OF A LETTER OF ASSURANCE, IF ANY, OR IN ANY LICENSING AGREEMENTS ARE REASONABLE OR NON-DISCRIMINATORY. ISA REQUESTS THAT ANYONE REVIEWING THIS DOCUMEN

15、T WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE DOCUMENT NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ANSI/ISA-75.08.03-2001 (R2013) - 4 - ADDITIONALLY, THE USE OF THIS DOCUMENT MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE DOCUME

16、NT CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS DOCUMENT MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USERS PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONS

17、IDER THE APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS DOCUMENT. THE USER OF THIS DOCUMENT SHOULD BE AWARE THAT THIS DOCUMENT MAY BE IMPACTED BY ELECTRONIC SECURITY ISSUES. THE COMMITTEE HAS NOT YET ADDRESSED THE POTENTI

18、AL ISSUES IN THIS VERSION. The following people served as members of ISA Subcommittee SP75.08 and approved ANSI/ISA-75.08.03-2001: NAME COMPANY W. Weidman, Managing Director Parsons Energy & Chemicals Group H. Baumann H B Services Partners LLC G. Borden Consultant R. Brodin Fisher Controls Internati

19、onal, Inc. F. Cain Flowserve Corp. R. Chown Otec Process Systems, Inc. B. Hatton DeZurik Division Unit J. Reed Norriseal H. Sonderegger Anvil International, Inc. The following people served as members of ISA Committee SP75 and approved ANSI/ISA-75.08.03-2001: NAME COMPANY W. Weidman, Managing Direct

20、or Parsons Energy & Chemicals Group D. Buchanan, Chairman Union Carbide Corp. A. Abromaitis Red Valve Co., Inc. H. Backinger Consultant G. Barb Consultant H. Baumann H B Services Partners LLC J. Beall Eastman Chemical Co. W. Black Cashco, Inc. W. Blackwell Industrial Valve H. Boger Masoneilan Dresse

21、r G. Borden Consultant S. Boyle Metso Automation USA, Inc. R. Brodin Fisher Controls International, Inc. F. Cain Flowserve Corp. A. Engels Praxair, Inc. H. Fuller Valvcon Corp. J. George Richards Industries L. Griffith Consultant D. Grunenberg Richards Industries J. Jamison Bantrel, Inc. R. Jeanes T

22、XU Electric J. Kersh M W Kellogg Co. - 5 - ANSI/ISA-75.08.03-2001 (R2013) C. Langford Cullen G. Langford, Inc. W. Lestan Dresser Valve Division A. Libke DeZurik Valve Co. R. Louviere Services Unlimited J. McCaskill Power Chokes A. McCauley Chagrin Valley Controls, Inc. R. McEver Emerson Valve Automa

23、tion H. Miller Control Components, Inc. T. Molloy CMES, Inc. L. Ormanoski Frick Co. J. Ozol Northern States Power W. Rahmeyer Utah State University J. Reed Norriseal K. Schoonover Con-Tek Valves, Inc. A. Shea DeZurik/Copes-Vulcan E. Skovgaard Leslie Controls, Inc. H. Sonderegger Anvil International,

24、 Inc. ANSI/ISA-75.08.03-2001 was approved for publication by the ISA Standards and Practices Board on 04 April 2001. NAME COMPANY M. Zielinski Fisher-Rosemount Systems, Inc. D. Bishop Consultant M. Cohen Consultant M. Coppler Ametek, Inc. B. Dumortier Schneider Electric W. Holland Southern Company E

25、. Icayan Advanced Control & Engineering Solutions A. Iverson Ivy Optiks R. Jones Dow Chemical Co. V. Maggioli Feltronics Corp. T. McAvinew Merrick & Co. A. McCauley, Jr. Chagrin Valley Controls, Inc. G. McFarland Westinghouse Process Control Inc. D. Rapley Rapley Consulting Inc. R. Reimer Rockwell A

26、utomation J. Rennie Factory Mutual Research Corp. H. Sasajima Yamatake Corp. I. Verhappen Syncrude Canada Ltd. R. Webb Power Engineers W. Weidman Parsons Energy & Chemicals Group J. Weiss EPRI M. Widmeyer EG&G Defense Materials R. Wiegle CANUS Corp. C. Williams Eastman Kodak Co. G. Wood Graeme Wood

27、Consulting The following people served as members of ISA Subcommittee ISA75.08 and reaffirmed ANSI/ISA-75.08.03-2001 (R2013): NAME COMPANY W. Weidman, Chair WCW Consulting H. Baumann H B Services Partners LLC ANSI/ISA-75.08.03-2001 (R2013) - 6 - G. Borden Consultant F. Cain Flowserve Corporation R.

28、Chown Madawaska Mechanical Inc. R. Duimstra Fisher Controls International Inc. V. Mezzano Fluor Corporation J. Reed Consultant J. Young The Dow Chemical Company The following people served as members of ISA Committee ISA75 and reaffirmed ANSI/ISA-75.08.03-2001 (R2013): NAME COMPANY J. Young, Chair T

29、he Dow Chemical Company W. Weidman, Managing Director WCW Consulting L. Al-Awami Saudi Aramco H. Baumann H B Services Partners LLC J. Beall Emerson Process Management M. Bober Copes-Vulcan H. Boger GE Oil & Gas G. Borden Consultant S. Boyle Metso Automation USA Inc. J. Broyles Enbridge Pipelines Inc

30、. F. Cain Flowserve Corporation R. Duimstra Fisher Controls International Inc. J. Faramarzi Control Components Inc. J. George Richards Industries C. Hergert Kellogg Brown & Root H. Hoffmann Consultant J. Jamison Spectra Energy Ltd. J. Kiesbauer Samson Aktiengesellschaft A. Libke DeZurik G. Liu Consu

31、ltant T. Loudin Flowrox Inc. H. Maxwell Bechtel Power Corp. J. McCaskill Expro Group A. McCauley Chagrin Valley Controls Inc. R. McEver Consultant V. Mezzano Fluor Corporation H. Miller Consultant T. Molloy CMES Inc. L. Ormanoski Consultant J. Reed Consultant E. Skovgaard Control Valve Solutions Thi

32、s standard was approved for reaffirmation by the ISA Standards and Practices Board on 14 January 2013: NAME COMPANY D. Dunn, Vice President Aramco Services Co. R. Bartusiak ExxonMobil Chemical Company P. Brett Honeywell Inc. J. Campbell Consultant M. Coppler Det Norske Veritas Certification Inc. E.

33、Cosman The Dow Chemical Co. - 7 - ANSI/ISA-75.08.03-2001 (R2013) B. Dumortier Schneider Electric J. Federlein Federlein & Assoc. Inc. J. Gilsinn Kenexis Consulting E. Icayan ACES Inc. J. Jamison Spectra Energy Ltd. K. Lindner Endress+Hauser Process Solutions AG V. Maggioli Feltronics Corp. T. McAvin

34、ew Instrumentation and Control Engineering LLC R. Reimer Rockwell Automation S. Russell Valero Energy Corp. N. Sands DuPont H. Sasajima Azbil Corp. T. Schnaare Rosemount Inc. J. Tatera Tatera & Associates Inc. I. Verhappen Industrial Automation Networks Inc. W. Weidman WCW Consulting J. Weiss Applie

35、d Control Solutions LLC M. Wilkins Yokogawa IA Global Marketing (USMK) D. Zetterberg Chevron Energy Technology Company This page intentionally left blank. - 9 - ANSI/ISA-75.08.03-2001 (R2013) CONTENTS 1 Scope . 11 2 Purpose 11 3 Definitions 11 4 Dimensional data . 11 5 References . 12 Annex A (infor

36、mative) Dimensions for metrically sized valves . 15 This page intentionally left blank. - 11 - ANSI/ISA-75.08.03-2001 (R2013) 1 Scope This standard applies to socket weld-end globe-style control valves, sizes 1/2 inch (15 mm) through 4 inches (100 mm), and screwed-end globe-style control valves, siz

37、es 1/2 inch (15 mm) through 2 1/2 inches (65 mm), having top, top and bottom, port, or cage guiding. 2 Purpose 2.1 The purpose of this standard is to aid users in their piping designs by providing Classes 150 through 2500 socket weld-end control valve dimensions and Classes 150 through 600 screwed-e

38、nd control dimensions without giving special consideration to the equipment manufacturer to be used. 2.2 The short-long dimensions provided in Tables 1 and 2 clarify 2.1 by consolidating the diversity of existing manufacturers lengths into two sets of dimensions for each size valve. Before using eit

39、her the short or long dimensions, the piping designer should confirm with the selected valve manufacturer which dimension is correct for the valve(s) being supplied. 3 Definitions For definitions of terms used in this standard, see ANSI/ISA-75.05.01-2000 (R2005), Control Valve Terminology. 4 Dimensi

40、onal data 4.1 Face-to-face dimensions for socket weld-end globe-style control valves are listed in Table 1. Table 1 Face-to-face dimensions for socket weld-end globe-style control valves PN 20, 50, & 100 (Classes 150, 300, & 600) PN 150 & 250 (Classes 900 & 1500) PN 420 (Class 2500) Nominal Valve Di

41、mension “A” Dimension “A” Dimension “A” Size mm inches mm inches mm inches Tolerance mm inches Short Long Short Long Short Long Short Long Short Long Short Long mm inches 15 1/2 170 206 6.69 8.12 178 279 7.00 11.00 216 318 8.50 12.50 6.4 0.25 20 3/4 170 210 6.69 8.25 178 279 7.00 11.00 216 318 8.50

42、12.50 6.4 0.25 25 1 197 210 7.75 8.25 178 279 7.00 11.00 216 318 8.50 12.50 6.4 0.25 40 1-1/2 235 251 9.25 9.88 235 330 9.25 13.00 260 381 10.25 15.00 6.4 0.25 50 2 267 286 10.50 11.25 292 375 11.50 14.75 324 400 12.75 15.75 6.4 0.25 65 2-1/2 292 311 11.50 12.25 292 11.50 324 12.75 6.4 0.25 80 3 318

43、 337 12.50 13.25 318 533 12.50 21.00 381 660 15.00 26.00 6.4 0.25 100 4 368 394 14.50 15.50 368 530 14.50 20.88 406 737 16.00 29.00 6.4 0.25 ANSI/ISA-75.08.03-2001 (R2013) - 12 - 4.2 Face-to-face dimensions for screwed-end globe-style control valves are listed in Table 2. Table 2 Face-to-face dimens

44、ions for screwed-end globe-style control valves Nominal Valve Size PN 20, 50, & 100 (Classes 150, 300, & 600) Dimension “A” mm inches Tolerance mm inches Short Long Short Long mm inches 15 1/2 165 206 6.50 8.12 1.6 0.062 20 3/4 165 210 6.50 8.25 1.6 0.062 25 1 197 210 7.75 8.25 1.6 0.062 40 1-1/2 23

45、5 251 9.25 9.88 1.6 0.062 50 2 267 286 10.50 11.25 1.6 0.062 65 2-1/2 292 311 11.50 12.25 1.6 0.062 5 References American Society of Mechanical Engineers (ASME) ASME B16.11-2005 Forged Fittings, Socket-Welding and Threaded Available from: ASME Three Park Avenue New York, NY 10016-5990 Tel: 800-843-2

46、763 http:/www.asme.org - 13 - ANSI/ISA-75.08.03-2001 (R2013) ISA ANSI/ISA-75.05.01-2000 Control Valve Terminology (R2005) Available from: ISA 67 Alexander Drive PO Box 12277 Research Triangle Park, NC 27709 Tel: 919-549-8411 http:/www.isa.org Manufacturers Standardization Society of the Valve & Fitt

47、ings Industry (MSS) SP-84-1990 Valves - Socket Welding and Threaded Ends Available from: MSS 127 Park Street, NE Vienna, VA 22180-4602 Tel: 703-281-6613 http:/www.mss- This page intentionally left blank. - 15 - ANSI/ISA-75.08.03-2001 (R2013) Annex A (informative) Dimensions for metrically sized valv

48、es This annex is not part of ANSI/ISA-75.08.03-2001 (R2013), but is included to facilitate its use. Dimensions for metrically sized valves are nominal conversions that are conventionally used in the Manufacturers Standardization Society (MSS) of the Valve and Fitting Industrys Publication MSS-SP86-2

49、002, and in International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) documents. This page intentionally left blank. Developing and promulgating sound consensus standards, recommended practices, and technical reports is one of ISAs primary goals. To achieve this goal the Standards and Practices Department relies on the technical expertise and efforts of volunteer committee members, chairmen and reviewers. ISA is an American National Standards Institute (ANSI) accredited organization. ISA