GMKOREA EDS-T-5106-2008 ELECTRIC BLOWER FOR ENGINE COOLING.pdf

《GMKOREA EDS-T-5106-2008 ELECTRIC BLOWER FOR ENGINE COOLING.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-T-5106-2008 ELECTRIC BLOWER FOR ENGINE COOLING.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto Materials and components of parts must comply with GMW 3059. 8.4. EMC is based on EDS-T-5010, EDS-T-5523, and EDS-T-5521 9. SPECIFICATION IN DRAWINGS In drawing this specification is specified as follows. “Test specification to EDS-T-5106“. EDS-T-5106ELECTRIC BLOWER FOR ENGINE COOLING

2、 PAGE: 6/6 ISSUED DATE: 1989. 06. 01 REVISED DATE: 2008. 10. 27 VERSION: 3 GM DAEWOO Auto & Technology 10. DEVIATIONS Deviations from this specification or additional requirement must be agreed. 11. TEST SEQUENCE FOR TEST SAMPLE OF BLOWER Blower No Tests Clause1 2 3 4 5 6 7 8 9 10 11 12 13 14Basic p

3、erformance 6.2 O O O O O O O O O O O O O ODynamic unbalance 6.8 O O O O O O O O Storage 6.3 O O O O O O O O O O O O O OBasic performance 6.2 O O O O O O O O O O O O O OFatigue test 8.4 O O O O O O Basic performance 6.2 O O O O O O Oscillating strength 6.5 O O Basic performance 6.2 O O Salt-spray test 6.6.1 O O Test of protection against water 6.7 O O Basic performance 6.2 O O Electric strength 6.9 O O Blade terminal lug 6.10 O O Impact resistance test 6.11 O O Low temperature mobility test 6.12 O O Salt-spray test 6.6.2 O O